I tried inserting a ceiling grid, command started fine, usual prompts....enter & no grid.
I switched to the work tab, that has a 3-d view and there is the grid. I cannot find what I did alter its visibility in model space.
ACA2011
Win 7 64
I'm using AutoCAD 2008 and trying to make a smart ceiling grid using the tools palette. The tool runs fine, however my grid doesn't show up in my drawing. I checked all my layers and they're fine. I think my ceiling grid visibility display is turned off.
Any command to turn it on? Checked the product, it gives me options to turn it on/off when it's already visible in a view, but this doesn't work since I can't see it at all.
Is there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
I don't know why this isn't working for me today. I want to edit the Bay Size of my Ceiling Grid in one room. When I select the Grid..right click Properties and select the Bay Size, I can't seem to change the size.
View 2 Replies View RelatedI recently downloaded the trial version of Autocad Architecture 2013. I changed my main customization file to aca.cuix so that I would have the build panel. The build panel is now there, but it is not working. All the icons are questions marks and when I click on the ceiling grid icon it says 'unknown command'. How can I get the ceiling grid function to start working?
View 2 Replies View RelatedRevit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedI want to add a ceiling grid to my rooms. I am using a hatch to do this. So I draw a polyline around my room and select the hatch net.
My hatch then displays at 600x600 within the room. The only thing I want is for the hatch to start from the center of the room and work outwards. This is so I have a center run of tiles and then they work outwards at 600mm each tile until they reach the outer wall and the last tile will be reduced equally at each side.
I'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.
Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24
When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:
Missing parameter on line 385.
Is there a setting to export the grid lines of ACT ceiling in a 3D view to DWG?
I don't know if there is because I can't even get the grid lines to show in a 3d view. Right now the view shows the ACT ceiling as a simple geometric shape.
I'm using Revit 2014 & have not been able to fade the ceiling grid lines so they don't plot out so heavy on my dwgs. I've tried overriding graphics of these grids with half tone which didn't work then I tried transparency & that did not work. They either stay on or turn right off!
View 4 Replies View RelatedAre there any plans to add the simple yet productive feature of moving an object in the X and Y directions at the same time?Also, I would love to be able to select the ceiling grid and hit the space bar and have the grid rotate 90 degrees.
View 4 Replies View Relatedis this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies View RelatedI am using Adobe Illustrator CC version 17.0.1 x64 on Windows 8.1.
In Edit > Preferences > Guides & Grid I have the Show Pixel Grid option checked but when zoomed in over 600% the pixel grid does not appear. Am I missing something?
I'm trying to use Gimp to add a visible grid to a printed picture, so thatI can use it as a guide when painting a copy of the pic. I haven't beenable to figure out how from the documentation. There is a grid, and itshows on screen, but not when I print.
View 1 Replies View Related I've used CorelDraw for a couple of years manly for simple newsletters and flyers. My question is concerning the visibility, or in my case, the non-visibility of the baseline grid. First of all my equipment is as follows: Dell Inspiron 620, i5-2320 @3.00 GHz, 8gb Ram 64bit windows 7 home premium with all current updates. I'm using a education version of x6 suite and it's updated to version 16.3.0.1114.
These are the steps I've taken: I created a rectangle within the document and using the layout toolbar I clicked "convert the object to a text frame". With the text box active, I clicked view/grid/baseline grid, but alas, no baseline grid is visible within the text box.
Autocad Architecture 2012: my dwg is fully visible in 3D View but partially visible in plan View. What could be causing this problem? See screen shot attached.
View 4 Replies View RelatedI have an Architecture drawing and only the current layer is visible from the pull-down lift. I can only access the other layers by opening the Layer Manager.
View 2 Replies View RelatedI am using ACA generic walls and doors for quick schematic room layouts.
I use the sheet set manager to make sheet with views.
All 2D linework is visible in the views, but the walls and doors (AEC objects) do not appear!
I have been working with ADT 2012 for a month now, and I am missing the way that my crosshairs used to snap to a grid, even if a command is NOT active. If I am zoomed in close, I used to be able to have my pickbox/crosshairs snap to the 1" grid that I have set up. However, that I only works if I have a command like "LINE". What setting do I need to change to make this work the way it has for YEARS?
View 7 Replies View RelatedCan I label a grid in ACA 2010 like this:
x1; x1.1; x2; x2.1; x3; x3.1 etc........?
Every time I hover near a column grid it auto selects and is crippling my workflow. I basically have to turn it off to work. Is there a way to desensitizes a grid object?
Typically If I want to change or select a grid I would just pick it. In ACA 2012 I can’t get near it or it selects itself.
I am having a problem with my grid lines F7 coming back on, there is no consistency or reason that I can see that might be turning them back on, I can be zooming in and out, stretching something, dimensioning something?
View 3 Replies View RelatedHow to explode a 3d layout grid after creating it.
View 1 Replies View RelatedI just installed autocad architecture 2012. when i opened it to start creating a new drawing/project the unit of measurement was in Millimeters.. i needed the Unit of measurement to be in architectural units, so i used the units command to change it to architectural units. the problem i am having now is that i think the Grid Scale is still in MM. when i tried to draw a line on the grid the line appeared to be tiny. the length of the line was 36'-5". i adjusted the scale to 1/4"=1' but that didnt change anything. in order to see the line that i drew i have to zoom in so much..
How do i adjust the grid scale to be the same as the units?
I cannot seem to make the clng-grid appear on the "sheet." It is visible in the construct, and the view, but nothing I do makes it appear in the sheet once the view is placed.
I did modify Display Manager to show the grid on "medium detail" along with the other floor plan items in all 3 DWG's. Works fine in construct and view, no joy in sheet.
It won't even appear when I flip the vport to "reflected" or "reflected screened."
Using Architecture 2012 and seem unable to get a column grid to show automatically in elevation views. Looks fine in plan view, bubbles etc all working once we sorted out annotative setting .
View 3 Replies View Relatedi draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies View RelatedI have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedUnderstanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...