Are there any plans to add the simple yet productive feature of moving an object in the X and Y directions at the same time?Also, I would love to be able to select the ceiling grid and hit the space bar and have the grid rotate 90 degrees.
View 4 RepliesRevit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedIs there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
Is there a setting to export the grid lines of ACT ceiling in a 3D view to DWG?
I don't know if there is because I can't even get the grid lines to show in a 3d view. Right now the view shows the ACT ceiling as a simple geometric shape.
I'm using Revit 2014 & have not been able to fade the ceiling grid lines so they don't plot out so heavy on my dwgs. I've tried overriding graphics of these grids with half tone which didn't work then I tried transparency & that did not work. They either stay on or turn right off!
View 4 Replies View RelatedSomething has happened and now I cannot select grid lines in curtain walls. I can tab to highlight the grid line (dashed blue line) and click once. This used to make the grid line a more solid blue and witness line dimensions appeared. Now the cursor becomes a "move cursor" (four arrows), the grid line highlight disappears and there are no witness lines.
Nothing is pinned. The vertical grid pattern is not fixed. I've restarted Revit and I still can't select a grid line like before.
This problem started when I tried to change a grid line in a curtain wall that I forgot was part of a group. It let me select the grid line and when I changed the witness line dimension value there was an error message with no information except for entity ID and a cancel button. After that I could no longer select grid lines in this project. If I copy and paste a curtain wall from the project to a default (see attached) I cannot select there either. I can still select grid lines in other older projects, however.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I'm using AutoCAD 2008 and trying to make a smart ceiling grid using the tools palette. The tool runs fine, however my grid doesn't show up in my drawing. I checked all my layers and they're fine. I think my ceiling grid visibility display is turned off.
Any command to turn it on? Checked the product, it gives me options to turn it on/off when it's already visible in a view, but this doesn't work since I can't see it at all.
I tried inserting a ceiling grid, command started fine, usual prompts....enter & no grid.
I switched to the work tab, that has a 3-d view and there is the grid. I cannot find what I did alter its visibility in model space.
ACA2011
Win 7 64
I want to add a ceiling grid to my rooms. I am using a hatch to do this. So I draw a polyline around my room and select the hatch net.
My hatch then displays at 600x600 within the room. The only thing I want is for the hatch to start from the center of the room and work outwards. This is so I have a center run of tiles and then they work outwards at 600mm each tile until they reach the outer wall and the last tile will be reduced equally at each side.
I don't know why this isn't working for me today. I want to edit the Bay Size of my Ceiling Grid in one room. When I select the Grid..right click Properties and select the Bay Size, I can't seem to change the size.
View 2 Replies View RelatedI recently downloaded the trial version of Autocad Architecture 2013. I changed my main customization file to aca.cuix so that I would have the build panel. The build panel is now there, but it is not working. All the icons are questions marks and when I click on the ceiling grid icon it says 'unknown command'. How can I get the ceiling grid function to start working?
View 2 Replies View RelatedI'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.
Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24
When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:
Missing parameter on line 385.
is this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies View RelatedWith no luck, I have been trying to figure out how to insert a blank value for ceiling heights in a finish schedule. There are other rooms with blank values, however it appears that rooms that once had a ceiling can no longer have a blank value. From the research I've done it seems the only way to correct this may be to delete and recreate the room.
View 3 Replies View RelatedI read a 2009/10 thread, "Rotating lighting", describing how to work around the problem of family lighting fixture members not rotating. I would hope there is a better solution today.
I simply want to place a lighting fixture - std 2x4 flourescent, on a 7 deg sloped ceiling. The axis of rotation is the long run of the light fixture. Is this not possible in Revit 2013?
Or, do I have to dredge up the work around from 3 releases ago and attempt to discern how to make it work?
It seems like I should just be able to set the family to use a work plane-based assignment and then place it with the correct work plane active. That is not happening. The light fixture doesn't want to rotate the 7 degrees to align with the work plane.
Basic master bedroom with a view. roof has a 9 pitch. I cannot figure out how to put a cathedral ceiling in. How do you?
View 4 Replies View RelatedI am laying out a simple structure. Bearing wall to bearing wall is 35’, with a few non bearing walls between the bearing walls. I will be using a truss to span from bearing wall to bearing wall. What would be the best work flow for the drywall ceiling material. The ceiling seems to require a core element. I cannot seem to manage drywall alone. If I create a ceiling with 2x4 core and drywall finish and create a ceiling over the whole area the ceiling seems to auto dim to the ceiling finish and not the core 2x4. Then there is the issue of the clean up at the top plate were the wall and ceiling finishes meet
View 1 Replies View RelatedI have one of the floors in our building doing something wacky. The 5th floor reflected ceiling plan looks fine so I create detail plans for the suites at a different scale. this new suite blowup has what looks to be the same suite but everything is greyed out and when i switch from coarse detail to fine detail it doesn't do a thing.
The orignal full reflected ceiling plan looks fine. The line are black. The detail swithces back and forth... I can;t figure out what the problem could be. I used the same process on other floor and everyting is OK. The View Ranges are the same and everthing else in the properties seem the same too.
I have a problem. The linked model from our electrical engineer its lights are at the correct height but the ACT ceiling is still running its lines throiugh the lights. how do we take care of this to where the linked model which has the lights in it cut through our ACT ceiling from our central model?
View 2 Replies View RelatedI'm use to working with autocad layers.In AutoCAD if I'm drawing electrical plan and floor plan, HVAC...ect I just freeze in viewport the things I don't want to see for that particurler sheet.
In Revit I duplicated my floor plan to create my electrical plan. I can add my recepticals and switchs but it won't let me add light fixture. Do I add the light fixture to ceiling plan then some how move them to my electrical plan?
How can I move my air vents to the ceiling plan from the floor plan ?
View 1 Replies View RelatedI have fixtures on the reflected ceiling plan showing up in the foundation. How to stop this
View 1 Replies View RelatedIs there a way to get the ceiling height automatic in a schedule?
View 4 Replies View RelatedHow We can to change the default height Ceiling plane In Project Browser.
For example, the Default is 2600mm.
I want to Over 2800mm set.
Not in Time Drawing Ceiling.
I want to place a Skylight on a Slope Roof that will be channel vertically thru the Raked Ceiling System. I need to show this skylight on Roof and Ceiling plans. without tracing lines or using Vertical command.
View 3 Replies View RelatedAny lighting fixture families in revit Architecture that snap to the ceiling grid? I've seen them in Revit MEP. Would be a lot nicer than having to align them manually.
View 1 Replies View RelatedI've got some troubles creating a proper ceiling plan. What goes wrong (imo) is that my wall sweep is shown on my ceiling plan while it shouldn't.First image shows the ceiling plan. (on image 3 you will see the wall sweep I mentioned in red).
This image shows the view range used.This images shows the section (right), 3d (top left) and ceiling plan (bottom left) highlighted the wall sweep.Why / how do I prevent this wall sweep from showing up?
I'm inquiring whether or not it is possible for Revit ceilings to be customized by the input of a user regarding the shapes and sizes without using a .pat file. Almost like a parametric object with predefined limitations. For example: a rectangular ceiling tile 'x' can be from 6 inches to 10 feet and side 'y' can be from 6 inches to 6 feet. So someone can select the ceiling type and actually input what size 'x' and 'y' they'd like while staying within those limitations.
View 1 Replies View RelatedI recently built a model-in-place generic model ceiling canopy using Revit 2013. I want to place lights (recessed cans) in the model. Can I change the model type to ceiling or is there a way to place light fixtures in it?
View 2 Replies View RelatedI try to isolate just the ceiling elements using the filter tool.
I found out that if the ceiling elements are in certain model groups, those can't be isolated and won't show up.
What's the best way to deal with it? Do I have to ungroup them before filtering?
I can't seem to find any sloping reference plane I have inserted as a Top Constraint for a wall I want to draw under it. How to make that happen? The only Constraints visible are Levels and Levels only appear to allow themselves to be draw exactly horizontally.
View 5 Replies View Related