I don't recall changing any features in AutoCAD 2013 that would take away my ability to type in the distance that I would like to place doors or windows along my walls, but now that it has been disabled and I don't have it.
View 2 RepliesWe have a house plan that has windows and doors of different types anchored to their walls. It seems that whenever someone is working in a file from the network that has the plan xrefed into it and the plan is opened to be modified by another user the windows and doors randomly detach from the walls. We're getting tired of going back in and reanchoring them.
(We're using Autocad Architecture 2009 on Vista)
Okay so to start with I have a building with 2 staircores. Everything is drawn in 3d and I have drawn the 2 staircores as elements and subsequently Xrefed these elements into the relevant constructs and subsequently a 3D model view.
When I view the elements as a live drawing (ie. when I open the individual elements) the drawing views okay in plan and in 3D wireframe, hidden mode etc... no problem so far!
When the drawing is Xrefed into a construct and subsequently a 3D model all of the windows and doors disappear... but in 3d only - ie. viewed in plan mode they are fine. I have checked the display configurations in the constructs and views and they are all set to display these objects in the medium detail and high detail for the model and plan modes.
In 3d wireframe mode the windows and doors can be seen within the wall but the opening which they should create is non-existent!This occurs in teh construct and view drawings.
Here's the catch.... I have a 'West Staircore' and and 'East Staircore'. Both are drawn as individual elements. The West staircore is giving trouble, but the East is perfect. They were both set up using the same DWT file which means that the default display configuration settings should be identical.This is backed up by the fact that they view correctly in the live element drawings.
When they are both Xrefed into the same construct, one is fine and the other will not display in the 3D model!
On one of our drawings all of the doors (aparently except for one) detached from their host walls. The doors were still in their places, but un-anchored. We can go through and re-anchor them, but that's a lot of work, especially since they get shifted to the point on the wall you pick to re-anchor them.
1) Is there an easy way to re-anchor them to their original location?
2) What caused this (so that we can avoid this in the future)?
When I select the doors I want to use for my floor plan I can't see the picture of the door that I selected before and after I place it onto a wall, when you usually can. You can only see it on symmetric view, but not in a floor plan bird view, all you see is a gap in the wall (looks like the wall is split into two separate pieces). This only occurs for the doors, the rest of the design tools, I can see their pictures before and after, on the floor plan. I think maybe changed some settings, I'm not use. Maybe there is a way to set everything to deafult settings?
I'm using AutoCad Architecture 2011 (metric)
have trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
Currently our door schedule populates when the doors are inserted into the drawing. I would like to know if I can set the schedule up so it populates when the door is tagged. Our doors are inserted into a base plan and that base plan is xrefed into various sheets.
The doors are tagged in one of these sheets and not the base plan. It takes too much time to stop and set up the schedule to schedule the doors across the xref for every project we do. I have read several articles but none of them explain how to schedule from the tag that I can see. I thought this was how the schedule was set up in a previous version.
When the spaces are auto created, is there a way they would include doors? I mean, doors are also floor area and they should be also scheduled/added to the space.
View 3 Replies View RelatedI've just upgraded to ACA 2012. I can see how to insert a door in either an offset "or" centered position, but not both. In my previous version, the position could be set to "center / offset" which was an "and / or" option depending on the cursor location. Is this option available in ACA 2012?
View 2 Replies View Relatedhow to adjust the display level on doors.
I have attached a PDF of my problem.
In the sketch is a simple room with 3 types of doors.
A Single door which displays properly
An overhead door which has a sq box attached to it and
A Double door which has all sorts of lines/boxes displayed on it
Ho do I get the doors to appear normal in plan view.
I am using ACA generic walls and doors for quick schematic room layouts.
I use the sheet set manager to make sheet with views.
All 2D linework is visible in the views, but the walls and doors (AEC objects) do not appear!
This just started happening with 2013. The doors are no longer staying put when a wall is extended or trimmed. Somehow they now move relative to exthe endpoint of the wall. Happens with windows and openings as well.
Is there a new default setting I'm not aware of?
i make a lips that draw doors and window in 3d from block in 2d......the problem..It does not work in all autcad¡¡ the same version but different pc.
View 9 Replies View RelatedI'm trying to send a set of drawings for my consultant. They will be using it as a background for their mechanical and electrical drawings and they only need the 2d information. They want to be able to explode them and remove any items they don't need before switching all the layer colours to grey.
When they get the drawings and explode them the doors and walls explode onto the correct layer but the colour of those object and lines are now set to the actual color of the layer rather than colour "bylayer". The line actually take on the colour of the layer in the properties dialogue box. Therefore when they change the colour of the layer to grey the doors remain 'red'.
I would like the doors/walls to stay on their respective layers...AND their colour to be BYLAYER when exploded.
I am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.
View 1 Replies View RelatedI have a model with 5 reference drawings. Everything has been going fine. I am making modifications in 2d wireframe view Then I change to realistic view and conceptual view and see that half of my windows have disappeared and some doors. I open up the first floor plan and see that most of my windows, doors, and openings are not cutting the walls. It just happened and now I cannot get them to anchor in the wall.I did purge, -purge R, audit, recover and closed and reopened the program. No Change! What could have caused all of these objects to lose their anchor?
View 1 Replies View RelatedIs there a way to have one schedule to tabulate the materials (by area, volume and length) as well as windows and doors (by pieces)?
View 1 Replies View RelatedIs it possible to make a true cut in windows or doors. Sometimes windows or doors needs different presentation in different levels. I can do this by changing the door or window family to a generic model family but why can i not do this in the door/window family?
(too the left generic model family and to the right the door family)
how to change the dimensions of the doors and windows in revit 2013 when i select the door ,, the door dimensions are in like M_single-flush 08153/2134 mm etc but my college project is having the dimensions in inches
View 2 Replies View RelatedMy floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedI have designed a the interior walls of a building in Vectorworks. I didn't use the wall tool, no symbols and all the 'walls' have a solid fill.
Once i've imported the dwg/dxf file into 3ds Max I cannot insert simple doors or windows properly. They don't cut through the walls and i cannot place them accurately despite having snaps on.
How to have the “walls, doors, windows, etc.” in metric units? If there is a way to have the “walls, doors, windows, etc.” in metric units.
View 2 Replies View RelatedWhy would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?
I am working on drawing a simple garage with a few windows throughout it. After inserting the windows in the wall where I want them, I cannot see them from the top view. If I switch to an isometric view they are visible and exactly where I want them. what I may do to make these visible from the top view?
View 1 Replies View RelatedI bought Autocad Arch. 2008 for my Dell Laptop and now my laptop is going down hill fast. It is 5 years so I'm not expecting to much. I'm looking to replace it with one of the new Macbook Pros.
View 6 Replies View RelatedHow I would create a triple hung window?!
View 1 Replies View RelatedUsing Autocad or Autocad Architecture on a Microsoft Surface with Windows Pro 8
View 3 Replies View RelatedI have an assebly with the door going down to grade level and the flanking windows 30 inches up. I used a profile to create the assebly shape. In plan you cannot see the brick below though you can see it between the assemblies.
View 5 Replies View RelatedMy autodesk loaded on windows 7 but will not open up.
View 3 Replies View RelatedI am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
I'm just looking to find the appropriate driver for a HP Designjet 750C for 64-bit windows 7
View 9 Replies View Related