I am creating a fireplace family in Revit Architecture 2012 with wall host (Speciality equipment with Wall host). I selected the template created the family, but in mean time i can't understand the wall is having delete option.(i.e it is released from host). I am surprised to see that in the family type, the wall host is missing.
I would like to cut a void into the wall of a host window family. When I place a void in the family, it does not cut thought the wall.
I tried making the void on a plane perpendicular and parallel to the wall plane. I dont know if this has anything to do with how voids work. But its not working. I also dont have an 'opening' element in the window family.
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
I've made a few roof hosted families, and they've all been fine in the past. For some reason, with this one, when you load it into a project it appears to be one 'ref level' too high for the roof host, hence revit errors, displaying that it can't cut the roof void.
I assume this is something really simple I should (or not!) have done with the family when I started it, can it be saved?
I want to Create a Wall Nitch that will be in a tiled shower we are doing. Best way to create a family that cuts into a wall? I don't want to Create an opening, because I don't want it going all the way through the wall.
Created a family with category 'column' in order to make in room bounding.
This family is basicly some extrusions. nothing fancy about that. However when placed in my model these extusions merge with the wall and inherit their properties which I don't want.
I would like to create a family component using the wall foundation bearing footing as a template. I cannot find the file where the templates are located. I tried using the structural footing template but it would not give me the same flexibility the wall foundation bearing footing template does.
I don't know if this is possible, but can a door family read the rating of a wall and also have it read in the door schedule? I have tried applying a shared parameter on the door family and adding it in the project. I am not understanding how I can link the two together.
I am trying to build a curtain wall panel family (see attached). I want the extremities of the solids to be glued to the surrounding frame. I want to be able to scale the model inside the frame with different curtain wall panel system sizes. 5'x4', 6'x8' etc... I am having problems with restricted constraints. I do not know what I am doing wrong. the model inside the panel are created from soild extrusions. if I align the solid extrusion from one side of the frame , only that side will grow or shrink with frame, and makes the model look weird. I tried to group the solids with reference lines in them glued to the reference line grid i created in the panel and that did not work. I want to be to scale proportionally the model inside the panel.
I am creating a folding door model and would like to use a parameter called EXERIOR WALL OFFSET. I have used this parameter before but am having trouble getting it to work within my family. The only difference is that I created one frame/jamb instead of 4 seperate profiles. The question is, why can't i get the jamb to move within the wall using the exterior wall offset parameter? It seems to move the sash/panels just fine but the jamb is constrainted somehow.
I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
I need a file called Curtain Wall Dbl Glass.rfa. It's missing in the Doors folder in my UK Fmaily Library in my software. I've found one on the web. I've copy/pasted it onto my Desktop. How do I now load it into my Revit project ?
I need to tag my roof soffits, exactly the same way I tag my ceilings to show the height. At present, I have tried to use a ceiling, roof, and multicategory tag to tag a roof soffit and it does not work!!!
Autodesk, how do you tag a roof soffit? send me a roof soffit tag.rfa to start from? The category does not exist in the OOTB family templates.
I have created a door family that has a concrete fill that replaces the insulation in an insulated precast wall. When I cut a section through the jambs looking down it looks correct but when the section is looking up the concrete fill pattern is not visible.
I would typically cut my sections looking up so that the exterior face is down in the view as it will be cast.
I received a Revit file from a client. What may have been purged from the file. When I try to cut a section, I am presented with the choice of a Building Section or a Detail Section. The Wall Section is not available.
How do I get access to the wall sections? These are available as families which could be reinstalled.
As the wall wraps do not work on the soffit (only on reveals), I have used a sweep to match the wall plaster thickness to provide a finish.
Is it possible to report the host wall finish material and have it assigned to this sweep automatically ? I have tried to add a finish layer to the host wall in the family - but have not been able to find a way of extracting the material value for this layer.
For the moment I have left it as an Instance property for manual correction - but automated would be great.
I have made an extruded wall and when I attempt to add a window I get this warning.
None of the created elements are visible in Structural Plan: Erdgeschoss View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings.
I have a staircase from the first floor to second floor with a total of 3 landings.. I need to fix the railing at the bottom to go down to 3'0, right now its sitting at 3' - 6"... AT 3'0" it needs to connect to the handrail that wraps around (the red)...normally I can just edit the railing by pulling it longer but since it was a place on host railing.. it looks like it loops around and when I tried playing around with that to extend the bottom rail.. it gave me an error..
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?