I have a model done and cutting a Foundation plan and then dressing it out. I want to use the architectural dimensions but needing to offset the column bubble at the stair pad as you can see on the attached dwg. I cannot figure out how to adjust the dimensions with out having to manually draw a dim line.
View 3 RepliesI am already using autocad and Covadis (because I'm road-design, etc. ...-); I'm new building and I use Revit Architecture 2011
Already I do not understand why my isolated foundations are not visible in plan view when the footings are beautiful and well visible in the plan view,...
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
When I select the doors I want to use for my floor plan I can't see the picture of the door that I selected before and after I place it onto a wall, when you usually can. You can only see it on symmetric view, but not in a floor plan bird view, all you see is a gap in the wall (looks like the wall is split into two separate pieces). This only occurs for the doors, the rest of the design tools, I can see their pictures before and after, on the floor plan. I think maybe changed some settings, I'm not use. Maybe there is a way to set everything to deafult settings?
I'm using AutoCad Architecture 2011 (metric)
having several simple (AuoCAD Architecture) DWG room floor plans, based on basic 2D lines, etc, I am searching for a possibility to make them ready for 3D (for e.g. converting lines to wall objects with default height, etc).
Are there any common tools specialized on this issue?
Or would it make sense to build for e.g. a VBA tool to support the CAD technician for repetitive tasks, like extrusions, in order to goal 3D, without having to draw everything (new) from scratch.
Autocad Architecture 2012: my dwg is fully visible in 3D View but partially visible in plan View. What could be causing this problem? See screen shot attached.
View 4 Replies View RelatedI have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies View RelatedI am electrical engineer and I have little experience with autocad . How can I calculate the number of acertain block in a 2D plan , such as the number of electrical socket in abig plan with autocad 2010
View 2 Replies View RelatedI've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
From my project manager > views, I select a view, it opens in model. I change to paper space and have my plan and an isometric view (in wire frame). I go to view and select shaded with edges. Perfect, colors on both plan and isometric are where I want them, now I want to print this.
I select my print icon and change my paper size select my printer. I select extents, center the plot and fit to paper. I preview.. And my color disappears. What.. Am I doing wrong. Should I be making my paper representations from a different start?
Yesterday.. I was trying to do the same thing.. But starting with the drawing in constructs. I end up with the same, my isometric drawing looses most of its color, the windows have color as does one layer (a line showing the outline of the floor under). The plan drawing has most of the colors but some of the layers are black where in the model they have color. To further complicate the problem.. The same procedure making a first floor drawing has the plan in complete color.
Where can I find the architecture drawing plan for double storey bungalow in autocad version?? I need it for my project...strictly educational purpose.....
View 6 Replies View RelatedI can get curtain walling to follow a curve in plan. Is it possible to get it to follow a slope as well as the curve. i.e base curve of 25m dia and the top curve 20m dia at 6m high. the end result would be a curved sloped cutain wall.
View 1 Replies View RelatedI placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
I have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies View RelatedI am having issues with isolated foundations not showing as cut when the cut plan is through the foundation. The wall foundations are shown cut, but I cannot get the isolated foundations to show cut. I verified by wall sections that both foundation types are definitely passing through the cut plane.
View 9 Replies View RelatedJust what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies View RelatedSee the attached PDF file.
I can't move down the wall foundation. (The highlighted piece.) What's the reason of it? The properties of the wall foundation doesn't have the offset feature.
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies View RelatedI would like to create a family component using the wall foundation bearing footing as a template. I cannot find the file where the templates are located. I tried using the structural footing template but it would not give me the same flexibility the wall foundation bearing footing template does.
View 2 Replies View RelatedI'm new to Revit. For instance I was working on adding foundation slabs to my walls .. all walls were done and had slabs beneath them and one wall still didn't have any. Once I tried to add the slab to that particular wall ( just by clicking on it, like ive done with every other wall ) it fails to do so and doesn't add any slab.
But my main problem is, sometimes when I work on my project everything becomes UNCLICKABLE, I do not know what im doing wrong and the only way for me to add walls or anything is by clicking CTRL+Z untill the meny gets highlighted again.
Ive put a screenshot in the folder.
I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedWhen I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.
View 4 Replies View RelatedI updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI have a paper blueprint of a floor plan, where all units are expressed in mm. I need to transfer this to autocad, so I am wondering how to construct the plan in mm? (changing units, etc.)
The scale is in 1:100. Does that matter?