I can get curtain walling to follow a curve in plan. Is it possible to get it to follow a slope as well as the curve. i.e base curve of 25m dia and the top curve 20m dia at 6m high. the end result would be a curved sloped cutain wall.
View 1 RepliesI have a curtain wall I need to make, but I need it to be curve on elevation. Its an arch. I can do it on sketchup but I need autocad precision to establish the modules. I have this division settings, horizontal 3.111 vertical 3.559m.
The profile arch has a 40.062m radius. 27.741 arc length. and a total angle of 39.673.
My question is, how can I bend the curtain wall??? I can make a flat curtain wall to follow my referenced base curve, but I need tu curve it in elevation. Here is a demo view from sketchup.What i'm trying to do is the coloured face.
How do I get the stripes to follow the curve of the bonnet / hood of the car, without getting the square edges and keep them an even distance apart.
View 6 Replies View RelatedI am trying to make a straight image follow a curve and I cannot figure out how to do it. I want the checkered image to folow the curve on the blue image.
View 11 Replies View RelatedIs it possible to have a gradient follow a certain path or curve?
It seems the gradient tool will only go in a straigt line.
i've been using xara pgd for a few months now and absolutely love it. massive jump up from my old program which was very limiting (graphic design is a hobby / business necessity, not my full time gig).
so my first question to you good peeps: i've been trying to "bend" text to follow a radius using 'fit to curve' ... this has been problematic as the text wants to align itself at the end of the curve rather than the middle.
is there another way to bend text to a specified radius?
I can't find the way to unmerge previously merged cells in curtain walls.
View 2 Replies View RelatedIs it possible to define a Curtain Wall programmatically?
View 2 Replies View RelatedThere is a brick-like pattern on a geological cross section I could draw this in manually but any way to do it automatically so there is a uniform horizontal distance between vertical separators? I tried creating a brick type swatch, but this created horizontal lines which did not follow the curve of the stratum.
View 12 Replies View RelatedI created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.
View 1 Replies View Relatedit's possible to create a barrel vault skylight that would work similar to a curtain wall (i.e. stretch the skylight and it adjusts to a fixed size and adds mullions)?
View 1 Replies View RelatedI have a model done and cutting a Foundation plan and then dressing it out. I want to use the architectural dimensions but needing to offset the column bubble at the stair pad as you can see on the attached dwg. I cannot figure out how to adjust the dimensions with out having to manually draw a dim line.
View 3 Replies View RelatedI can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
When I select the doors I want to use for my floor plan I can't see the picture of the door that I selected before and after I place it onto a wall, when you usually can. You can only see it on symmetric view, but not in a floor plan bird view, all you see is a gap in the wall (looks like the wall is split into two separate pieces). This only occurs for the doors, the rest of the design tools, I can see their pictures before and after, on the floor plan. I think maybe changed some settings, I'm not use. Maybe there is a way to set everything to deafult settings?
I'm using AutoCad Architecture 2011 (metric)
having several simple (AuoCAD Architecture) DWG room floor plans, based on basic 2D lines, etc, I am searching for a possibility to make them ready for 3D (for e.g. converting lines to wall objects with default height, etc).
Are there any common tools specialized on this issue?
Or would it make sense to build for e.g. a VBA tool to support the CAD technician for repetitive tasks, like extrusions, in order to goal 3D, without having to draw everything (new) from scratch.
Autocad Architecture 2012: my dwg is fully visible in 3D View but partially visible in plan View. What could be causing this problem? See screen shot attached.
View 4 Replies View RelatedI have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies View RelatedI am electrical engineer and I have little experience with autocad . How can I calculate the number of acertain block in a 2D plan , such as the number of electrical socket in abig plan with autocad 2010
View 2 Replies View RelatedI've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
From my project manager > views, I select a view, it opens in model. I change to paper space and have my plan and an isometric view (in wire frame). I go to view and select shaded with edges. Perfect, colors on both plan and isometric are where I want them, now I want to print this.
I select my print icon and change my paper size select my printer. I select extents, center the plot and fit to paper. I preview.. And my color disappears. What.. Am I doing wrong. Should I be making my paper representations from a different start?
Yesterday.. I was trying to do the same thing.. But starting with the drawing in constructs. I end up with the same, my isometric drawing looses most of its color, the windows have color as does one layer (a line showing the outline of the floor under). The plan drawing has most of the colors but some of the layers are black where in the model they have color. To further complicate the problem.. The same procedure making a first floor drawing has the plan in complete color.
Where can I find the architecture drawing plan for double storey bungalow in autocad version?? I need it for my project...strictly educational purpose.....
View 6 Replies View RelatedI placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
I have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies View RelatedI want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedWhy in LR4 is the Tone Curve default set to Custom with a contrast lowering curve? I would like the default to be linear, but I can't remember how I set that up in LR3.
View 5 Replies View Related