it's possible to create a barrel vault skylight that would work similar to a curtain wall (i.e. stretch the skylight and it adjusts to a fixed size and adds mullions)?
View 1 RepliesI can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
I have a curtain wall I need to make, but I need it to be curve on elevation. Its an arch. I can do it on sketchup but I need autocad precision to establish the modules. I have this division settings, horizontal 3.111 vertical 3.559m.
The profile arch has a 40.062m radius. 27.741 arc length. and a total angle of 39.673.
My question is, how can I bend the curtain wall??? I can make a flat curtain wall to follow my referenced base curve, but I need tu curve it in elevation. Here is a demo view from sketchup.What i'm trying to do is the coloured face.
Is it possible to define a Curtain Wall programmatically?
View 2 Replies View RelatedI created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.
View 1 Replies View RelatedHow to create curtain wall with Mullion and insert in to project.
View 1 Replies View RelatedI am trying to create a custom curtain wall which will contain vertical strapping for the vertical mullions and horizontal wood boards. I created the two profiles and am able to create the curtain wall type control spacing etc...This looks great in elevation and plan, but when I cut a section detail the vertical strapping is cut at every horizontal mullion.
My question in short! If I want to create the look of continuous horizontal boards how can I prevent the vertical mullions from being cut? I'd rather not offset them apart so I can use this model element in details. See the section detail view attached.
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedI want to create a space style similar to BOMA with editable boundaries to use for LEED Daylighting calculations. I figured out how to make a new property set definitions, new space style, etc., but I can't get the boundaries to read as the LEED boundaries. I want the Base area to remain as is, but I want NET to be Daylit, Useable to be Sidelit, and Gross to be Toplit.
I could do the workaround and just use the OOTB BOMA style, but then others editing will have to constantly translate which means what as we edit the drawings. When you look at the display display Properties for the space style, the boundaries and hatches read as net, useable, etc. I can't figure out where to redefine those and when you right click the space and Edit Boundary, I need to be able to display the correct properties, not the BOMA properties.
I've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedI am working in Arch Desktop 2011 and need to make a wall for a upper floor and roof line with different plate heights. See the attached drawing for explanation.
What I'm trying to do is create an upside down "V" wall to fill in this area. This is an as-built drawing for an existing house with an addition.
I am trying to use a pline to create an open ended wall. When I try to 'calculate automatically' by selecting a pline the width of the wall (2 components 8" wide total) the dialogue comes up and asks which component I want to apply the endcap to. I want to apply it to both, but don't seem to have that option.
View 2 Replies View RelatedIs there a way to create a window that slides into a pocket in a wall the way a pocket door does?
(I'd define a pocket door style for it but I'd like it to appear as a window for tags and schedules.)
Attaching the draw.
The top transom (beam) has to be cut on 2 levels degree : inout as the circle diameter , and up and down as the slope . I made the drawing with the SWEEP command of a 2D transom view along a line, but the result is not good To get the dimensions of manufacturing, it is good as a general "simulation". How can i do it more accurate?, or it is a big task for the autocad?
way to create a gypsum board wall with the metal fittings inside?
I mean to have the fitting for example every 60 cm/ 25 in, and the metal frame on top and bottom of it.
Is there any similar wall in the ACAD architecture tools palette?
I'm running Photoshop CS3. I recently got a Wacom Cintiq 22HD Touch with an Art Pen. The Art Pen supposed to give me that 6th rotation(barrel rotation). But when I tried it, it doesn't rotate any of my custom brushes.
View 3 Replies View RelatedI am working in Revit 2013 and built the curtain wall on all four side but i am only able to see it in north and south elevation view and not in east and west elevation view.
View 5 Replies View RelatedI've been added and removed specific mullions along curtain wall grid lines and now have the mullions where I want them. Unfortunately, some of the glass panels remain divided along the grid lines even though the mullions have been removed. Is there some way to join the two panels into one?
View 9 Replies View RelatedI'm trying to work up a standard curtain wall type for our office, and have hit a snag with a curtain wall panel.
I'm trying to make a panel which will feature a louvre profile, that will sit in the curtain wall opening nice and neat, and array the required height of the panel.
I've made up a generic object, inserted that into a CW panel, then got that into my CW OK, and it flexs fine, but if I try and do an array then it all falls apart?
As far as I've got attached, all I can get to work properly is to have the top and bottom louvre, if I turn this into an array it extends outside the bounds of the CW panels left/right reference plans.
I also have tried to do the array based on a division, e.g. 2000/50 = array number, but to do this I need a height, and when I try and put a height in it becomes overconstrained...
I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies View RelatedAre ther good sources available for learning about modeling curtain walls- complex curtain walls in Revit?
View 1 Replies View RelatedI do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedI'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies View RelatedI am trying to design the border mullion of the curtain wall, in a way that its centerline aligns to the border gridline.
For default the border mullion aligns the external face of it to the gridline, but I would like it to act as the internal mulluon - aligning with the centerline.
Why would a curtain wall double door be symmetrical in the family editor but asymmetrical (always by 3") in the project.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies View RelatedI'm working on a small project: a 2 story single house.
There are some curtain walls in the house. Also, a sliding glass door within the curtain wall. I want the same window schedule covers both the regular fixed windows and curtain walls.
Is it better to convert the curtain walls to regular windows? Or there are other better options?
I am trying to export my floor plan to dwg file and I have curtain wall there which have panels as regular wall types. The problem is that exporting it will put those panels on the wall layer. I need them to be on curtain wall panel layer. I tried to use "Function" parameter in wall family by changing certain wall types to Retaining (since I don't use this parameter) and changed Wall/Retaining category layer to curtain panel in dwg export setup. But it seems it has no effect.I also noticed that walls inserted as panels into curtain wall do have a parameter under "Identity Data" with the name "Categorize as" where are two values - wall or panel. But this does not have any effect either since there is no category for it in export setup.
View 2 Replies View RelatedI have the general outline and form of my building designed but I'm having problems with patterned curtain walls.
I have created my own Patterned Curtain wall Family and applied it to a conceptual mass, I have not added any parameters as I'm not too familiar with this aspect of Revit. The corners of the building do not align allowing viewing straight into the interior.
I have attached the model in my dropbox so you can fully understand my problem..
Conceptual Mass - [URL]......
Actual Model - [URL]........
Curtain Wall Family - [URL]......
I am also interested in applying glass to some of the hexagon patterns instead of steel to act as windows. At the moment I'm just turning the transparency up on individual patterns .