Is it possible to move the autolayout data of this existing rectangular pipe (see attached). I want my pipe to attach at the top or bottom rather than the middle. I tried creating one from scratch but don't really know what im doing yet and can't seem to get it to validate.I've seen a bunch on creating structures, but not much on pipes.
View 1 RepliesUsing part builder, I created a new pipe part for an odd-sized CMP arch pipe. In plan view, the pipe looks good. At first glance, I thought the pipe was drawn correctly in a profile view, but I realized that the pipe was displayed with the invert located at the wrong place in the profile view. I thought this was because the insertion point of the new pipe part that I had made was placed at the incorrect location in part builder.
So, I swapped out the incorrect pipe size for another one that I knew was correct, and then deleted the incorrect pipe from the pipe parts list, and went back to part builder, and placed the insertion point at the invert of the pipe; then saved the edited pipe part, ran partcatalogregen, added the "corrected" pipe part to the pipe parts list and swapped in the new corrected pipe size to the pipe network. However, the pipe still displays incorrrectly on the profile view.
The pipe data is correct in the pipe properties: the invert is stated to be located at elevation 20. The overall height of the pipe , 38" (3.1667') is correctly displayed on the profile view. But the actual location of the pipe invert is not shown at the correct location, elevation 20, on the profile view.
I am wanting to add a field to my pipe parts to store the pipe pressure and stiffness class separately to give me the most flexiblility with my labels is this possible thru the partbuilder interface I got to here but can not see a way to add custum field. There are some extra build in fields like material are they hard coded or can you hack the xml file directly to add additional fields.
View 3 Replies View RelatedI am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies View RelatedI tried to add a part size in part builder but the dwg wouldn't save or update. It was write protected or something. How can I get around this?
View 4 Replies View RelatedI am trying to learn Part Builder to create a custom inlet structure. I am able to build the part in Part Builder so it looks like it should and seems to work correctly when I change part sizes. I run into trouble when I try to change the model parameter for Structure Height (SBSH) to a formula invovling Rim to Sump Height (SRS). When I do this and then go to Edit Size Parameters, I get an error " one or more calculations have failed". It does not seem to make any difference what formula I use for SBSH or what size parameter or model parameter SBSH was set to before I entered the formula.
I am able to save the part without any other error messages, however, when I look at the .xml file, SBSH is a constant and not the formula I entered. I can edit the .xml file to enter the formula that I want but still the part does not function properly in a drawing.
I can make a pipe network using the new structure, however, the pipe inverts are not the same as the sump elevation of the structure. They are usually several feet below the sump. I can get the structure sump to match the pipe inverts by going to "Connected Pipes" under "Edit Structure Properties", highlighting the pipe invert elevation and then clicking "Apply". If you change the pipe using "Edit pipe properties" after this, the structure invert does not update as it should.
I am trying to make parts in part builder but when I try saving I get the error message "error saving XML file". I tried changing the setting on the files for saving but that doesn't seem to work.
View 5 Replies View RelatedI'm trying to do a save as of a previously created and validated part. When I create a new chapter and try to save the part in the new chapter, I get an error message saying "ERROR SAVING COLE FILE". What is a COLE file and why am I getting this error? Could there be a problem because the original part was created in 2013, and now I'm working in 2014?
We recently changed the location of our CAD Standards (such as Pipe Network Catalog). Can I simply copy the Pipe Network Catalog and paste it to the new location and have everything work the same or do I have to do something special?
is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
In Land Desktop using the Hydrology tools, we could get capacities for rectangular pipes based on slope, size, etc.
I have tried using the Hydraflow Express tools for this, but cannot figure out how to use them for a RECTANGULAR pipe (i.e. 10x4) box. Saw the circular option, but couldn't change where it says circular.
This is not a culvert analysis because we have inlets, multiple slopes, etc. It is part of an entire system.
I use these tools to layout the system before I want to put it into the analyses software we are using.
I have a problem I can't figure out. I have a Pipe Style defined that is set to draw my pipes as double lines in plan using the inside pipe diameter. The problem is that there are a few sizes such as 21" & 30" that will not draw/display the double lines to the correct inside pipe dimension.
It will draw a 27" pipe as 10" & a 30" pipe as 12", but all other pipe sizes are drawn crorectly. I have looked at these in part builder & have also rebuilt my parts list.
What would cause certain pipe diameter not be drawn at the correct size it the style is defined correctly?
civil 3d 2012
I have a 18' x 10' special structure where I'd like to be able to connect the pipes as shown to the structure but I'm not aware of any way to force the Connection point of the pipe to the desired location along the structure.
Normal behavior is to connect all pipes to the same insertion point or center of structure.how to go about maintaining pipe connection orientation to reflect the design requirements?
Just a question about pressure pipe networks in 2013. Is there concrete pressure pipes in the part family, including concrete bends?
View 2 Replies View RelatedIf I was to build a rectangular pipe reducer in parts builder does it have to be built as a structure or could or be a pipe? I am having a hard time understanding how to use part builder. I am trying to work with all the tutorials I can find. I just wish I could find a step by step on how to make a reducer.
View 3 Replies View RelatedWe have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedDear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedWe are just starting with Civil 3D 2012. We are doing a pilot project, and the engineer wanted to make a custom curb subassembly matching the exact dimensions (angle from bottom of curb to top of curb) as the county detail. I didn't think that was necessary and thought we could use one of the generic subassemblies. usually use the basic or generic subassemblies or do you create your own to match specific municipalities' details exactly?
Do you find that the parts that come with Civil 3D are usually sufficient for design or do you make a lot of custom parts?
Can the rectangular box around the number tag be edited or removed all together?
View 1 Replies View RelatedPipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedI created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedOne of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View RelatedUsing Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedIs there a way to get a part number on pipes created by the routing tool? It seems that if it's default or custom data, the data gets blanked out on the generated files.
I'm trying to get this to work for a client who uses 2011, and from what I can tell this is still an issue in 2013.
Is there anyway to change a rectangular Mview to a polygon one. I have all the text and call outs and now the engineer wants to blank out everything behind the match lines. I will probably never make a rectangle mview again.
View 4 Replies View RelatedI'm a bit confused on the style library system built into Inventor - it isn't very intuitive.
I'd like to create my tube and pipe styles as well as sheet metal styles and have to never create them again - regardless of the project/workspace. Is this something that can be saved in the standard part/assembly template files? If so, how?
I'm tired of creating styles every time I start a new document - it is a waste of a lot of time! And I'd like to avoid having to import settings on every document.
I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1
Seems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
Is it possible for a civil 3d structure to be displayed correctly in profile view when the alignment does not pass through the insertion point of the structure. See the attached screen capture.
The rectangular structure is a storage tank and there will be a pipe coming in on one end and the exit pipe will be on the adjacent side at the far end, just as the alignment shows - but the structure doesn't show correctly, or now how I expected.
I created a pipe rule and applied it to my 6" HDPE pipe in my parts list. The rule is followed close but not exact. Here it is:
I created a "cover only" rule for my 6" HDPE pipe. I have the maximum and minimum cover set to 3.50'. I have it the same so it will draw my pipe 3.50' deep. I don't want it to vary. It for drawing in existing underground power so when we cut profiles and sections the existing power shows up. We want it to show up 3.50' deep. I created a label style for my pipe that tells me start cover and end cover of the pipe so I can see it right there on the screen. The numbers range from 3.50' deep to 4.70' deep.
Why does the pipe not get drawn in exactly 3.50' deep?
When I create a new pressure network in 2014 - I have only Tees & Elbows available - Where are crosses? I need a 4-way cross at an intersection, C3D seems to include just the other two types I listed.
View 3 Replies View RelatedI have this block called gate valve. The base point is at the middle of the block. When I use this block as a style and insert it in profile it always places itself down low on the pipe. As you can see the grip is way above the top of the block and I have to move it into place anytime I use one. If I change the pipe inverts the gate valve block style lowers itself once again and I have to move it up into place. I have changed the base of the block but it makes no difference.
This is how the structure look in the object viewer. Notice the one on the right is the block that needs to be raised, however in the viewer it shows placed correctly.