GIMP :: Select Align Tool
Aug 8, 2013
I am trying to align some stuff and having a heckuva time. Its basically this..
word * wordyword * wordhere * wordwordword
the * are little blue dots centered horiz and vert.Everybody is on their own layer.I am trying to get everyone equidistant, the words aligned bottom and the dots aligne center vertical.
I select the align tool, then click on word. Next holding shift I drag everything else and it is all selected. K. I have trimmed all the layers so all that is there are the things I want to align.
I have tried clicking everything in the options box and the closest I get is with distribute horizontal centers with offset but that leaves me with odd spacing.. if I simply select the text it is better, but the spacing is still not right..
View 7 Replies
ADVERTISEMENT
Jun 4, 2011
Is there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies
View Related
Jun 21, 2011
I am using the fuzzy select tool to select a contiguous region of white background (to make it transparent). The flower has some white areas and it selects a small area of the flower too.
I have another whitish flower and I have no problem with fuzzy selecting the white background.....except when I add contrast to the image (and the white areas are also selected). I haven't found a way to add contrast after fuzzy selecting/adding an alpha channel. Is there a way to do this?
View 1 Replies
View Related
Jul 23, 2012
When I use my mouse to use select tools (like the lasso, the outline lines that appear (that show the selected area) show up fine. When I use my tablet, usually, they are not visible.
View 3 Replies
View Related
Jan 21, 2014
i tried restarting gimp but it did not fix my problem. All of a sudden, out of nowhere, my fuzzy select tool selects WAY too much even at a threshold of 1. at 2 it just selects the whole picture.Re-installing did not fix.
i am creating black/white based icons. So it is a 48x48 image. i am mainly trying to fuzzy select black, white, and transparent selections. As you can guess, it has become impossible now and i don't know what i did.
EDIT: Okay so it actually isn't selecting "too much" per-say. i willt ry and explain the best i can here:
Black and white image with the exception of some shades inbetween.Select fuzzy select and put threshhold at 1. Click. Selects all the white (i actually think it misses some). i hit SHIFT and click on a pixel that is slightly not white. VERY SLIGHTLY. In fact, it may actually be white. It fuzzy selects EVERYTHING.
Another example on an image that is Black and Transparent (with shades inbetween) Slect black on threshold 1. It selects All the black AND all the shades inbetween. Eveything except flat out transparent. i hit CTRL and select a shad einbetween and it deselects everything.
EDIT 2: Doesnt matter the threshold apparently. It will do this on any.
EDIT 3: The solution, after all, was so save these problematic images as JPG and then open them as the JPG.
View 3 Replies
View Related
Nov 27, 2012
I'm brand new to GIMP, I just downloaded it to get into some simple pixel art.
I was going fine, but I've run into a problem. I'm trying to select a portion of my image using the rectangle tool, and then move it to a different location using the move tool. However, when clicking and dragging the move tool it shifts the entire image, not just the portion I have selected. I read in the FAQ that you need to press "Enter" to finalise the selection before you move it, but even doing that doesn't work.
This was working fine for me earlier, I'm not sure what I've done to break it. I've tried resetting my tool preferences back to defaults but that has not worked.
View 1 Replies
View Related
Oct 13, 2013
I seem to be getting only partial transparency when using Foreground Select Tool (as compared to Full Transparency when using Rectangular Select Tool)
I am pretty sure this was not the case the other day. I have tried resetting all Tool Options and looking through preferences for anything I may have changed but can't spot anything.
View 8 Replies
View Related
May 25, 2012
I am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies
View Related
Mar 28, 2012
I was using Paint.net but I've found it too limited. The GIMP has much more power and I can do a lot more with it, but I've found a few things I can't figure out how to do.
For example, when I use the Eyedropper tool () to choose a color, GIMP doesn't seem to include any transparency in the selection:
The Colorpicker just chooses the color at 100% opacity. Is there any way to change this so that my new foreground color includes the transparency level?
View 4 Replies
View Related
Jul 13, 2011
I'm just getting back into image editing after a year of hiatus, and so I downloaded the newest version of gimp so I could get started. My select tool worked fine for a few minutes, then stopped letting me move pieces of my layer around. I was thinking maybe I accidentally changed a setting, so I fiddled with that, but no luck.
Select will still let me highlight and edit specific pieces of the layer, just not move them around. When I drag and drop, the piece of my layer appears as if I've selected nothing, and I'm only working on a single layer at the moment.
View 4 Replies
View Related
Jul 13, 2013
I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 Replies
View Related
Oct 20, 2013
I've been wondering how do you get the rectangle select tool to move the image, like in mspaint whenever I use it, it just moves the rectangle square and not the selected part of the image.
View 2 Replies
View Related
Apr 19, 2012
When I copy a selection from one image to another, I can't select the feather tool to blend it in the new image (it's greyed out). I have to first anchor the layer, then use the paths tool to re-select the pasted portion again, then feather. Is there another way?
Update: Looks like I can feather before copying/pasting the selection.
View 4 Replies
View Related
Mar 12, 2012
Is there a trick/tip to making a straight line with Free Select Tool?
View 3 Replies
View Related
Jul 16, 2012
i'm basically making a shape with the pen tool, then i click the paint bucket, then the shape disappears. i've also done this with the rectangle tool and the exact same thing happens.
usually, it will work when i frst open the document, but after i start making new layers/text then i try to do this, the shape i make disappears.
how i can keep the shape so i can select the paint bucket tool?
View 6 Replies
View Related
Dec 31, 2012
At first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
View 2 Replies
View Related
May 17, 2012
Recently upgraded to Gimp 2.8 for the single window mode (which worksbrilliantly in Ubuntu, especially with the HUD).
But the Rectangle Select Tool has a new - but odd - behaviour. When I drawa selection, and then add to that selection, a new "square" is position atmy cursor. (See attached screenshot.) This didn't happen in 2.6 and is abit irritating because it disorientates me slightly, especially if I'mworking quickly.
Is there a way to turn that off (or revert it to the 2.6 way)?
View 3 Replies
View Related
Dec 2, 2012
I choose the Free Select Tool and painstakingly click around the border of something to remove the background. Typically it's a car and I do hundreds of tiny free select points tracing around the car's outline. I make my way around the entire car and double-click to connect the last point with the first one. Then all the selection points disappear, I have no selection around the car, and I'm unhappy.
Here's what happened. Before I started working I inadvertently had done a "Select All". The Free Select Tool was inadvertently left in "Add" mode. GIMP did what it was supposed to do, it added the car outline selection to the "Select All" selection - with the result equal to "Select All" - and there goes all my selection points around the car.
You can end up in the same bad place when "Select None" has been done and you inadvertently left the Free Select Tool in "subtract" mode.
View 1 Replies
View Related
Feb 23, 2012
I'm practicing on photoshop cs5 and I'm working on picture and trying to change things in it but when it came to select auto-align layers from the edit menu it's not lighting to select it i, i can see it but can't select it.
View 4 Replies
View Related
Mar 2, 2013
I have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?
View 2 Replies
View Related
Dec 14, 2011
I've read all I could on snaps, video tutorials, changed every setting.
the only time anything snaps is when I'm creating an object in which case I get a box and the object snaps to other objects, bounding boxes end points, etc.. (useless stuff) but it doesn't work at all otherwise, it does absolutely NOTHING while selecting an object or edible poly/mesh object vertices, etc..
I JUST WANT TO ALIGN A VERTEX TO ANOTHER VERTEX.
I've seen videos of people just dragging the axis to another vertex and that vertex automatically aligning to it... why the heck can't that work for me? I don't even get a line, nothing that looks like any tutorials out there. Everything behaves the exact same way as without snaps. you can't even tell the difference moving things around except there is a little circle at the center of the gizmo. I even checked every box in the snaps settings. It makes me want to throw the computer out the window that it takes 3 hours and still nothing works.
Ultimately I just want to select a grid of vertices and align them in a planar xy axis at the same z value as a single of my choice... why is this so impossible?
View 9 Replies
View Related
Jan 17, 2012
I have three identical squares on top of each other at different elevations. As all of their location grips align vertically it should be possible to select the same corner grip of all of them in one easy operation, but how?
View 7 Replies
View Related
Oct 9, 2012
When I click the select tool, a brown selection type of rectangle appears in a particular area of the illustration, even though I have not clicked on the illustration yet. I assume it is some type of warning indication, but don't know what. P.S. It is draggable and scaleable - I can move it off the artboard. An example:
View 5 Replies
View Related
Jun 18, 2013
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
View 5 Replies
View Related
Jul 15, 2013
I remember being able to select anything on the canvas with my Quick Select tool in CS5.5 Photoshop Extended. Recently, making the switch to CC, the Quick Select tool will show my slection as I drag along the canvas, but once I release the mouse, the selection seems to be reduced to the visible pixels. I was intentionally trying to fill the transparent sections with my effects as well.
Mind you, the magic wand will select transparent pixels just fine, but it also adds unintentional sections which is irritating. I should probably also pint out that I already looked into the "lock transparence" option in the layers, but I did not activate anything of the sort.
View 3 Replies
View Related
May 15, 2013
Is it possible to select an area then within that area select by color?
View 1 Replies
View Related
Jul 25, 2013
I'm working with GIMP 2.84 for Mac, and my Fuzzy Select Tool is not working. When I choose it and try to select an area, it won't select.
View 3 Replies
View Related
Oct 6, 2008
I want to have those colored lines perfectly aligned and spaced with the same width between them all.
View 4 Replies
View Related
Sep 13, 2013
So everything is fine until I use the select tool, and then free transform a part of the image. Then my brush and eraser stop working until I save and restart the program.
View 1 Replies
View Related
Mar 11, 2009
No matter what tool I select, the hand tool is activated and I don't know how to get rid of it.
View 2 Replies
View Related
Sep 25, 2013
I have city maps from various sources with color-coded information. I'd like to align these maps on top of each other (as layers) as automatically as possible. The maps might have different scales and may vary in details. I'm hoping that some "edge extraction" and "overlap matching" can automate this task.
View 2 Replies
View Related
