Illustrator :: Changing Stroke Thickness On Paths?
Mar 21, 2013
In the attached, I've placed red circles around areas where I would like to start paths that will be thicker when they start (so that they look like they connect in a seamless way from the decorative swashes around the pre-existing, diamond shape in the middle of the page) and then get thinner as they go on. How do I do that so it gets realistic?
Also, how do you vary it genereally? I may want to thicken the paths again when they end.
I know how to use the pen tool decently but at the starting points I can't seem to get things to look like they realistically join what's already there.
View 1 Replies
ADVERTISEMENT
Oct 2, 2012
I recently purchased premier pro 6 after working with Inkscape and GIMP for awhile. I am trying to figure out some things that I used to be able to do in Inkscape. In Inkscape, you could change the thickness of a calligraphy stroke based on the speed that the cursor moved. It was called "thinning".
View 2 Replies
View Related
Nov 2, 2013
I'm actually about to punch my computer screen. Ok so say I draw up a triangle with the pen tool
Then i hit the colour option
it changes to 1pt
So I change the weight to 0pt. How I want it, but then the NEXT time i draw up another path or whatever, and hit the colour option it goes to 1pt again!!! this is so fricking annoying i'm about to jump off a cliff ?
View 3 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Mar 20, 2013
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies
View Related
Oct 22, 2013
I've used image trace to trace the outline of a street grid and expanded the trace into paths. However, after doing so, I realized I wanted the streets a bit thicker, so I increased the stroke value.
Is there a way to adjust the old paths to match the new outline? I tried saving it as a .jpg and retracing but the quality was subpar. Any way to "redo" the trace in the original file, or somehow tell Illustrator to move the paths to match the increased stroke? I need them to coincide once more with the edges of the streets. URL...
View 3 Replies
View Related
Nov 15, 2013
A screencast of my problem: [URL] .....
My illustrator has been really wonky lately; Mainly just not keeping lines where I put them. Is there an invisible pixel grid that I accidentally turned on at some point, and now everything is trying to snap to it?
I'm working at very large sizes, and I already tried reinstalling Illustrator. I can't seem to find anything on the Adobe forums, but I'll admit I'm bad at finding info I need online.
View 1 Replies
View Related
Aug 31, 2012
Returning to Illustrator after not using for a long time.
How can I permanently show paths created for example by the pen tool when I create them with no fill or stroke attributes - for example a set of contours?
If I set the view to outline (control + Y it does this but puts them on a white background meaning I can't see underlying layers.
View 2 Replies
View Related
Jan 7, 2013
In Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies
View Related
Jan 13, 2014
How do I give Lucida handwriting a 2pt outline stroke, give it an outline path, then unite it with another shape path without the text losing it's outline stroke?? I can't bold Lucida handwriting as it only has an italic option, so need to give it an outline stroke to achieve a bold letter. As soon as I give it an outline path and unite it to other shape paths the 'bold'ness disappears and it reverts to it's original size.
View 8 Replies
View Related
Jan 31, 2014
I am having trouble with the stroke of an image I drew changing once I drag it in front a square of color.
View 1 Replies
View Related
Jun 5, 2013
I'm having trouble merging paths. I'm combining the multiple paths with arrows to make the 3D effect (which is on all of them obviously) flow as one instead of on top of eachother. When I use the compound path command it reverses all my arrows and I have no way of changing them back without releasing the compound path (which puts them back to their original state of being on top of eachother)
View 3 Replies
View Related
Jan 29, 2013
If I wanted to change an objects stroke (outline) color for just part of the object, what would be the best way to go about that. Pro tip: Paint bucket tool in photoshop != the best way... it gets all pixel.
View 4 Replies
View Related
Sep 3, 2012
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
View 5 Replies
View Related
Jul 29, 2013
I have made a circular crest type image with a uniquely defined stroke (so it looks like a stamp). I want only the outside of the stroke to be bump and the inside be smooth (of the circle). Before I was just layering other white circles over it but now I need the inside to be transparent. Is there a way I can convert my stroke into an object so I can easily erase the bumpy inside? How else can I get around this? Top image is what I have, bottom image is what I want. Only to have a transparent center.
View 5 Replies
View Related
Jul 25, 2013
Just checking -- there's no way to directly animate the thickness of text stroke, is there?
EDIT: Ah -- by using a stroke Animator, it can be changed over time.
View 1 Replies
View Related
May 17, 2013
When I go to change the thickness of an artistic media stroke, it jumps up from .045 to .095 or down to 0.3, or similar sorts of jumps in either direction, when I want to make finer adjustments than that. I'm surprised that a program that has so many options and precise ways of doing things wouldn't allow that. Is there no way to accomplish that?
View 6 Replies
View Related
Jun 2, 2004
when I have a selection, make it into a path, and then stroke the path with the brush tool, it makes dots at all of the points on the path, instead of drawing a line along the path.
View 2 Replies
View Related
Aug 30, 2007
I know you can stroke a path through the layer style thingy , but that only strokes it with hard solid brush right? I need to know if you can stroke your paths with different brushes (i want to use pen pressure, spacing and all that jazz..and different brushes themself...).
View 5 Replies
View Related
Jul 15, 2007
I made a path with the freeform pen tool, direct selected it, then selected a brush and stroke the path. Worked fine.
Did another path, same process, only now I changed the brush settings (spacing, angle etc). For some reason OR I click stroke path and it doesn't do anything OR it strokes the path but with the former brush I used for the other path.
View 1 Replies
View Related
Dec 24, 2011
The tiny red line used to highlight selected edges in a viewport is nearly impossible for me to see. Is there a parameter to change this value? I found a place to change vertex display size, but nothing on edges.
View 1 Replies
View Related
Apr 12, 2012
I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies
View Related
Jun 4, 2012
How can I change the thickness and color of the crop grid in LR4? The lines are difficult to see.
View 3 Replies
View Related
Feb 23, 2014
I want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies
View Related
Mar 13, 2012
I wrote an app some time ago that swaps out user parameters that drive sheet metal thickness and bend radius.
it appears to work about 60% of the time when it doesn't it does not give any warning but even though the FX table shows the new user parameters driving thickness and bend radius the "sheet metal defaults dialog" thickness input box is grayed out and shows no value what so ever. Clicking the Edit Sheet metal rule to display the "Style and Standard Edtior" the Thickness and Bendradius still show the Old userparameters. See attached Pic.
I am setting the parameters as follows.
Replaced "Chan_Th" with "chn_thk" in FX Userparameters
then...
[Code]
oSheetMetalCompDef.UseSheetMetalStyleMaterial = True oSheetMetalCompDef.ActiveSheetMetalStyle.Thickness = sThick
[/Code]
As you can see FX reports the change but sheet metal settings does not.
This code appears to work or not at random.
View 7 Replies
View Related
Aug 12, 2013
In pervious versions of photoshop you could make a path with the pen tool and press esc to basically deselect the path without closing it. This would also allow you to make multiple paths so that you could keep making lines and then stroke them all at once. This no longer works with photoshop CC. Pressing esc just deselects the path but when you try to start a new path it continues the first one. Is there anyway to get this feature back in CC? It is such a waste of time to stroke individual paths instead of drawing all the lines with the pen tool and stroking them all at once.
View 1 Replies
View Related
Dec 4, 2012
Cannot lock other paths/unlock all paths in symbols?
View 8 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Jan 21, 2013
I've got a Library setup called "Vendor CAD" and it's referenced in all my project templates and most existing project IPJ's. I'm thinking of re-organizing my server and actually creating a CAD drive and moving all these files to an area protected from the non-CAD users.
Anyway, once I move the files, is there a way that I can batch change the existing IPJ's to refer to the new path? There's about 70 or so files, so it's not monumental, but I'd really like to not do it manually if possible.
Also - please note, I'm a single user, so I'm not using vault at all.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 9 Replies
View Related
Apr 9, 2007
The current default 'stroke' setting on my PS is 3 pixels/Red...how do I change it?
The stroke setting to which I refer is when I double click a layer and want to surround it with a stroke line of color. I have searched everywhere and can't find where to change the default setting.
View 5 Replies
View Related
