The tiny red line used to highlight selected edges in a viewport is nearly impossible for me to see. Is there a parameter to change this value? I found a place to change vertex display size, but nothing on edges.
View 1 RepliesIs there is any way of customizing the thickness of edges. I want to customize this... I am using Autodesk v2012
View 4 Replies View RelatedIn the attached, I've placed red circles around areas where I would like to start paths that will be thicker when they start (so that they look like they connect in a seamless way from the decorative swashes around the pre-existing, diamond shape in the middle of the page) and then get thinner as they go on. How do I do that so it gets realistic?
Also, how do you vary it genereally? I may want to thicken the paths again when they end.
I know how to use the pen tool decently but at the starting points I can't seem to get things to look like they realistically join what's already there.
I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies View RelatedHow can I change the thickness and color of the crop grid in LR4? The lines are difficult to see.
View 3 Replies View RelatedI wrote an app some time ago that swaps out user parameters that drive sheet metal thickness and bend radius.
it appears to work about 60% of the time when it doesn't it does not give any warning but even though the FX table shows the new user parameters driving thickness and bend radius the "sheet metal defaults dialog" thickness input box is grayed out and shows no value what so ever. Clicking the Edit Sheet metal rule to display the "Style and Standard Edtior" the Thickness and Bendradius still show the Old userparameters. See attached Pic.
I am setting the parameters as follows.
Replaced "Chan_Th" with "chn_thk" in FX Userparameters
then...
[Code]
oSheetMetalCompDef.UseSheetMetalStyleMaterial = True oSheetMetalCompDef.ActiveSheetMetalStyle.Thickness = sThick
[/Code]
As you can see FX reports the change but sheet metal settings does not.
This code appears to work or not at random.
I recently purchased premier pro 6 after working with Inkscape and GIMP for awhile. I am trying to figure out some things that I used to be able to do in Inkscape. In Inkscape, you could change the thickness of a calligraphy stroke based on the speed that the cursor moved. It was called "thinning".
View 2 Replies View Relatedat my screen shot I dont know why some of my menu are Highlighted I am using photoshop CS5
View 2 Replies View RelatedI am doing a copy of a painting and need to use curves...
I always use curves with no problem, but, adjustments isn't highlighted.
Is there a setting I'm missing somewhere. If I have a psd file with 10 layers, sometimes I want to quickly move an element around but, regardless of what layer I'm working on, or which layer is selected, my "selection tool" will grab whatever layer is the top one, or the whole "group" is the layer is in one, instead. So, usually, I have to reorder my layers to make the adjustment and then reorder them again.
View 3 Replies View RelatedI want to create a single map of my country that will highlight all the trips (about 10) I made with my car. To that end I have a mapping software that given the initial and final location of the trip it will create a map displaying the route traveled with a highlighted mark on the map along the route taken. This map is created in Adobe Flash format that I can screen capture creating a jpg file.
View 9 Replies View RelatedI am using Map 3D 2012 and when I float the cursor over objects it highlights.The problem is that when I click on the object that is highlighted, it picks another object. I have gone through the options and can't find anything that changes this.
View 4 Replies View RelatedI used the Ellipse Select Tool to cut, then paste an area in an image. Now the move of this image component is done I need to 'switch off' the ellipse to paint outside it. I expected the 'Select' 'None' menu option to switch it off, but it doesn't.
What should I do?
Why my develop module is not highlighted?
View 12 Replies View RelatedAdd Edit don´t cut all the layers highlighted. When I insert or overwrite a clip into the timeline, the timeline don´t respect the highlighted layers (ex. if layer 1, 2 and 3 were highlighted and the clip were put in layer 1, clips on second and third layer should be deleted between in and out markers, but they aren´t.
The Ctrl+D and Ctrl+Shift+D commands (add transition) doesn´t work like the other versions too (respecting where the cursor is)the buttons to go to the next cut on timeline (in my keyboard, A and S) doesn´t work right too.I would like to know if these are bugs or the new Premiere CC is different from the others before.
When I open an InDesign CC file, all boxes containg text are highlight a organge colour. How can I remove that?
View 2 Replies View RelatedI thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
I would like to be able to have my selected color swatch be highlighted in Photoshop cs5. Is there an option or a plugin that I can use so I can achieve this?
View 1 Replies View Relatedwhen I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
With one of my project files, when I try to create disc in VS Pro X4 only option DD-J is highlighted. When I try to select DVD or any of the other options, the project loads to 59% then the whole program freezes and the following dialogue box appears.
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
C:DOCUME~1userLOCALS~1Tempvstudio_14.0.0.342_20130216_144133.DMP
When I click on OK I get the message that the program needs to close and it just shuts down. I am using Windows XP. I have 12 other project files that I can create to disc without any problem.
I'm using AutoCad LT 2013 at work. My issue is I have always been able to highlight and object and then enter my command and perform that command. Something happened and now when I highlight then enter my command and press enter it un-highlights the object and prompts me to highlight the object again. Also if I want to copy and paste a highlighted object it wont allow me unless I type in the command first. I can't figure out what I did.
View 4 Replies View RelatedI'm currently plotting a site plan with different zones highlighted in a solid hatch. Each zone has a different colour and all zones are slightly transparent so i can see the site plan underneath.
The problem is that when transparency box is ticked , the site plan becomes more faded.Is there a way where I can use the transparency tool but keep the original line weights of the site plan.
When the mouse is placed on the elements ,They appear to be highlighted.
Can we highlighted to disable.??
Why are my Level Lines highlighted green?
Also why do some of the level symbols appear blue?
Searched and find, how to change the colors of the types, not why they are displaying in other colors than black.
I would like to set the highlighted surface under angle I pointed in the screenshot number 2 ( I drew black line how I would like to do that) how to start with it.
View 3 Replies View RelatedIn the new Illustrator CC, when cursering over text it underline highlights it. How do I turn this off? It's a bit annoying.
View 2 Replies View RelatedIs it possible to script using a highlighted layer.
I know that selected items can be used for scripting, but I would like to just highlight the layers I want to process but not directly select the items on those layers.
I can't access most of my Photoshop element 11 tools it only lets me open the guided. layers and other parts are not highlighted
View 1 Replies View RelatedI'm working in Adobe CC Illustrator on a MacBook Pro.When I click on an obect or text it is bounded by yellow. The background of my page is white. Yellow on white is irritating and hard to differentiate. I tried modifying my preferences, but nothing changes.
Change that highlight color to blue, red, purple.... anything but yellow? I need to delete preferences?
I tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View Related