Illustrator SDK :: Access Stroke Line Information
May 10, 2012
I am programming an Illustrator plug-in for flexible modifying the width of stroked lines created by the Paintbrush Tool or Pencil Tool. The way of width modification should be similar to the "Width Tool".
Now I would like to have access to the painted area of the stroke lines, which I want to modify. With the Width Tool it is possible to modify the borders of the painted area very flexible. That is the same I want to do in the first step, but I do not know how to access these borders of the painted areas of stroke lines. I would like to know which Suites/functions are responsible for dealing with the painted area of stroke lines.
View 1 Replies
ADVERTISEMENT
Aug 1, 2013
I am making a 15x22" print of a map of Baltimore and am not sure what pt size to maket the lines separating the neighborhoods. I want to be sure the lines are visible from far away, and, since this is my first time printing something this size.
View 1 Replies
View Related
Jul 10, 2013
I have placed a image in illustrator and i tried to put a simple black stroke round it but it doesnt work. what am i doing wrong.
View 3 Replies
View Related
Feb 16, 2014
How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies
View Related
Jul 7, 2013
For some reason I cannot create a line weight/stroke under 1pt in Illus CS6. I will select 0.5pt but the selection keeps defaulting back to 1pt. I deleted my preferences, but didn't work. How can I fix?
View 1 Replies
View Related
Aug 6, 2012
I am strating out designing in illustrator and how to created a stroked line, -----------, with each stroke ( - ) a different colour, like, each stroke having a different randomized color which differs from the next one. how to mask out parts of a template given to me by my school so i dont infringe that boundary when I add my lines to it.
View 11 Replies
View Related
May 20, 2013
Why does Illustrator place a hair line stroke around a clipping mask? How do I change that? I tried anti-alsing but as expected the entire image is applied.
View 1 Replies
View Related
Jul 31, 2012
I'm trying to figure out the height of my line segment. It has a 1.5 stroke point. How many inches is that?
View 3 Replies
View Related
May 20, 2011
I've found a number of articles outlining the process of extracting data from AutoCAD to an Excel file, but I'm wondering if it's possible to do the reverse. For my work I have a number of databased already established in Excel and am able to create information tables rather quickly that access these databases. Currently, after creating a table in Excel I then copy, paste, scale to the right size in AutoCAD.
There's gotta be a way to create a table in AutoCAD that simply accesses this information in Excel and just updates automatically. I produce a number of CAD drawings off of a template daily so this process has become quite the bottleneck.
View 4 Replies
View Related
Jun 5, 2012
Usually, when you check the 'dashed line' option on the stroke pallete, you will instantly create a dashed-line stroke on the selected path. What I don't know how to do is retaining the straight property of a dash on curve parts of the path.
(Improvised image for illustrating my problem)
View 8 Replies
View Related
Jun 23, 2012
- when modelling a part file in Inventor, only the dimensions we set (dimensions we give a name and a value), are listed in the parameters table. This way, its possible to export the information listed in that table.
- the information listed in the parameters table is based on sketches and features dimensions, as obvious.
So , my question is: is it possible to access the information (dimension values) contained in a feature (or a sketch) without setting a specific name or value to it?
For example, in the attached pictures, if a rectangular form is drawn and the dimensions are sett, these will be listed in the parameters table (see attached "pic1" and "pic1 - params").
But, in the other hand, if the same rectangular form is drawn, but this time without setting any dimension, the parameters table will be empty, obviously (see attached "pic2").
After this, i can surely presume that Inventor saves or keeps this information somehow, somewhere, without having to set dimensions or values.
So, my question is: is it possible to access sketches and/or features information without setting this values?
View 6 Replies
View Related
Oct 22, 2013
I want to present additional information on my drawings, whether in notes or some other form depending on whether it is a part or assembly drawing. The information I want to get access to is included in the material library and comes from the material Physical tab > Information section > Source, Subclass, Type, & Name.
Is the material library information accessible this way?
View 1 Replies
View Related
Feb 17, 2014
I have 26,000 images on an external drive (currently designated drive M), almost all tagged and/or rated and indexed in two PSE 11 catalogs on the main PC hard drive. I am just about to replace my PC. I assume that when I connect my external drive to the new PC, it is unlikely to be Drive M. How do I maintain access through the catalogs with all the stored information?
View 2 Replies
View Related
Jun 7, 2011
I know how to access the EXIF information inside PSP software OR from within WINDOWS but how to access it in terms of a text/DOC file so that it could be printed or used in other software?
View 4 Replies
View Related
Nov 9, 2012
I am currently trying to retrieve data from a MS Access Database, we currently have iProperties with number values in them. An outside programmer created a code which takes these values and exports them to an MS Access Database, where they are then translated to mean something.
Instead of exporting those numbers, I want to use them to find what they ACTUALLY mean within the database and bring that information back into iLogic. (ie. 123456 actually means "1/4 Flat Bar Steel")
In short, I wish to access the MS Access database through iLogic in order to read information from it.
I have searched for the better part of 3 hours but have not found a good answer or example code of this situation. I am not that experienced in programming, but have worked with the API before for developing Automated Drawings and have an understanding how to navigate through. If there were to be some example code, I can begin to understand the process quite well through this method as well by seeing how to go about coding this.
View 2 Replies
View Related
Mar 5, 2014
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
View 1 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Jun 24, 2013
I would like to know how to get the feature line information using lisp?
At this point I'm looking for the angle between the end point where I pick the feature line.
My goal is to rotate the crosshair to match the feature line. I can do this with a line or polyline.
View 9 Replies
View Related
Mar 14, 2013
When programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Jan 28, 2012
I am using editor.writeline to send information to the command line during the execution of a command. Unfortunately, it will only display the last message written when the command ends. Is there a way to display all the messages when the command ends? Below is the code that I am using.
Public Sub CreateVentilationLayers()
CreateTrimbleLayer(VENT375)
CreateTrimbleLayer(VENT500)
CreateTrimbleLayer(VENT625)
CreateTrimbleLayer(VENT750)
[Code]...
View 9 Replies
View Related
Aug 9, 2012
I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
View 3 Replies
View Related
Jul 3, 2009
How would I create a dotted or broken lined stroke around a selection.
View 1 Replies
View Related
Aug 26, 2011
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
View 4 Replies
View Related
Aug 2, 2012
I've been using a very old version of Photoshop for the last 10 years and I'm used to using the shift key to extend a line or paint stroke. By that I mean, I use the paint tool to make a dot and then hold down the shift key and make another dot elsewhere and that creates a straight line. I just purchased CS6 and that function doesn't seem to be happening. Is this something I need to activate in a preference?
View 10 Replies
View Related
Jul 11, 2013
I made a selection with the Freehand-Tools and I need to make a Stroke in the selection line! How can I do this?
View 2 Replies
View Related
Aug 2, 2013
I have an image that has a black stroke around it. I'm wanting to make that transparent and add a stroke to the outside of the black stroke, so it will basically be an invisible space there. Is that possible or is there an easier way?
View 1 Replies
View Related
Nov 9, 2011
Is it possible to create a custom stroke that doesn't scale to the length of the line you assign it to? I am trying to create a stroke that looks like a chain but when I create a custom brush, I have to almost create the brush pattern the same length as the stoke it gets applied to in order to avoid the chain links bunching up or being grossly stretched out along the assigned path.
Is there a setting or some other function that can accomplish this? Is there an easy way to assign a shape to along a path other than blend?
In the end I want to be able to assign a premade pattern to a line without that pattern being distorted or scaled along the path it is assigned to.
View 7 Replies
View Related
