Illustrator :: Height Of Line Segment - How Many Stroke Points In Inch
Jul 31, 2012I'm trying to figure out the height of my line segment. It has a 1.5 stroke point. How many inches is that?
View 3 Replies
ADVERTISEMENT
Illustrator :: Smooth Transition Of Stroke Width Along Line Segment While Preserving Original Width Outside
Mar 5, 2014Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
AutoCad :: How To Draw Red Line (Arc Between Points In Spherical 4 Side Segment)
Jun 2, 2011how can i draw this red line in autocad, its an arc from point 1 to point 3 in spherical 4 side segment? point 1 to point 2 to point 3 to point 4 closing the segment at point 1 and point 4 (fused)
View 9 Replies View RelatedIllustrator :: Line Segment Tool Does Not Allow To Draw Horizontal Line?
Oct 18, 2012I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
Illustrator :: Can Only Draw One Line Segment
Oct 19, 2013I'm sure this is a simple thing but it's driving me crazy. Every time I draw a line it gets erased as soon as I try to draw the next one.
View 7 Replies View RelatedIllustrator :: How To Make Default Line Segment
Sep 5, 2012is there a way to limit the length of a line segment stay a default length instead of it getting longer as you drag your mouse ? For example in a program called ChemBioDraw you can limit the default length for drawing molecules
View 6 Replies View RelatedIllustrator :: How To Delete Just One Segment Of Pen Tool Line
May 6, 2013How do you delete just one segment of a pen tool line? For example, if I draw a square and later I want to delete just one side of the square?
View 4 Replies View RelatedIllustrator :: How To Copy Diagonal Line Segment
Oct 31, 2012If I do Transform, Move, 40 40 40 0 Copy it seems to just make another line segment on top of the one I already have. I want to copy it down and to the right continually pressing CTRL+D. I think I am making a simple mistake since I have done this before.
View 4 Replies View RelatedIllustrator :: Small 1 Inch By 1 Inch Logo For Invoices - Resolution Of 600 DPI
Jan 25, 2013Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies View RelatedIllustrator :: How To Make Line Segment Tool Repeat Several Times
Oct 14, 2012How can I make the line segment tool repeat several times?
View 1 Replies View RelatedIllustrator :: Reduce Anchors Points In Segment Path Without Altering The Path?
Aug 31, 2013In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
Illustrator :: One Inch Square Box Does Not Draw One Inch
Oct 7, 2013If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
Illustrator :: CS6 Not Accepting Stroke Weights With Decimal Points
Mar 14, 2013I have been using Illustrator for almost 10 years and have never run into this one. When enter a stroke weight on a line with a decimal point like .25 or 4.5 is keeps rounding the number up. For example I enter 0.75 and it makes it 1 point or I enter 5.5 and it makes it 6 point. Whether I enter the number manually or pick from the drop down (0.25, 0.5 or 0.75) it keeps rounding my strokes to even numbers.
View 2 Replies View RelatedIllustrator Scripting :: How To Give Line Height To Text In AI Script
Jun 4, 2012how to give line height to text in AI Script
View 3 Replies View RelatedIllustrator :: Stroke Size On A Line
Aug 1, 2013I am making a 15x22" print of a map of Baltimore and am not sure what pt size to maket the lines separating the neighborhoods. I want to be sure the lines are visible from far away, and, since this is my first time printing something this size.
View 1 Replies View RelatedPhotoshop :: Batch Placement Of Text Watermark At Constant "inch" Height
Apr 1, 2008This should be simple but I cannot figure it out. I am trying to process large batches of photos with varying pixel counts, but they will all be printed at the same size in inches. I want a constant height text watermark on all of them, but since Photoshop only allows you to specify text height in "pixels," my watermarks end up at different relative sizes on each picture.
For simplicity, just consider 2 different pictures. One is 1700x2200 and the other is 2125x2750. I want to print each one at 8.5x11 with a 1/2" high watermark, via the same batch operation. Whatever pixel height I specify for the text in my watermark, it will be a different size in inches on each photo.
Is there any way to do this WITHOUT re-sampling the files as part of my batch operation? I don't like re-sampling when it's not necessary.
Illustrator :: Stroke Line Round Placed Object
Jul 10, 2013I have placed a image in illustrator and i tried to put a simple black stroke round it but it doesnt work. what am i doing wrong.
View 3 Replies View RelatedIllustrator SDK :: Access Stroke Line Information
May 10, 2012I am programming an Illustrator plug-in for flexible modifying the width of stroked lines created by the Paintbrush Tool or Pencil Tool. The way of width modification should be similar to the "Width Tool".
Now I would like to have access to the painted area of the stroke lines, which I want to modify. With the Width Tool it is possible to modify the borders of the painted area very flexible. That is the same I want to do in the first step, but I do not know how to access these borders of the painted areas of stroke lines. I would like to know which Suites/functions are responsible for dealing with the painted area of stroke lines.
Illustrator :: 3D Effect With Overlapping Line With Fill And Stroke?
Feb 16, 2014How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies View RelatedIllustrator :: Unable To Create Line Weight / Stroke Under 1pt In CS6
Jul 7, 2013For some reason I cannot create a line weight/stroke under 1pt in Illus CS6. I will select 0.5pt but the selection keeps defaulting back to 1pt. I deleted my preferences, but didn't work. How can I fix?
View 1 Replies View RelatedIllustrator :: How To Create A Stroked Line That Randomize Each Stroke Color
Aug 6, 2012I am strating out designing in illustrator and how to created a stroked line, -----------, with each stroke ( - ) a different colour, like, each stroke having a different randomized color which differs from the next one. how to mask out parts of a template given to me by my school so i dont infringe that boundary when I add my lines to it.
View 11 Replies View RelatedIllustrator :: Place Hair Line Stroke Around Clipping Mask
May 20, 2013Why does Illustrator place a hair line stroke around a clipping mask? How do I change that? I tried anti-alsing but as expected the entire image is applied.
View 1 Replies View RelatedIllustrator :: How To Create A Non Bended / Curved Dashed Line Stroke On A Path
Jun 5, 2012Usually, when you check the 'dashed line' option on the stroke pallete, you will instantly create a dashed-line stroke on the selected path. What I don't know how to do is retaining the straight property of a dash on curve parts of the path.
(Improvised image for illustrating my problem)
Illustrator :: Can Draw A Line From Multiple Other Lines End Points?
Oct 25, 2012Is there a somewhat easy way to draw this blue line, other than manually click on each anchor points at the top of the black lines?
View 32 Replies View RelatedIllustrator :: Change Position Of Anchor Points On Line
May 16, 2013How do I change the position of anchor points on my line, at the moment the anchor points are in the middle of my line, I would like the anchor points on the inside edge of my line so I can make my cut cuides more accurate. I am using illustrator CS6 cloud.
View 17 Replies View RelatedIllustrator :: Objects Won't Line Up With Anchor Points And Guides?
Jun 25, 2013Here's a screen shot to show what I mean. I tried to create this smaller box off of the anchor point of the larger box.
Currently usuing AI CS6 on a mac running osx 10.6.8
AutoCad :: How To Change Height Of The Points
Aug 8, 2012I am trying to change the height of the points. "pntelev layer" all at one time. The drawing was giving to me by our surveyor, and I am having a hard time finding a command to edit multiple points at the same time.
I can select one point and utilize block editor to change the height, but is there a way to select multiple points and edit all of them at one time?
I am using AutoCad 2012 and I believe that is one of my issues, b/c in the past when using Civil3D I had a points tab, and that is where we went to edit things like this.
I attached a .dwg
AutoCAD Civil 3D :: Change 8-inch Pipes To 6-inch Without Having To Recreate Network
Dec 3, 2012I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View RelatedIllustrator :: Quickly Straighten Lines Or Remove Multiple Points Of A Line?
Jul 22, 2012I am studying for an MSc in Geology and am doing seismic mapping. To tidy up my maps I exported them to ArcGIS so I could join various ones together and also contour the maps. Then I exported the GIS maps into illustrator so I could attempt to smooth some of the contours as they are extremely jaggedy due to the nature of the data.Is there a way to quickly smooth lines or mass delete points that make up the lines?I am asking because I have 30+ maps and each map has maybe 50lines with each line being made up of currently about 1000 points each...
If I can't find a solution I will probably end up drawing over the contours with the pen tool and just smoothing it that way, as it should be a lot faster then deleting so many points.
I am currently using Illustrator CS5 and have access to CS4.
AutoCAD 2010 :: Rescale Symbols On Drawing From 2 Inch To 1 Inch?
Apr 5, 2012how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies View RelatedAutoCAD Civil 3D :: Eliminating A Segment In A Lot Line
Oct 9, 2012I have a subdivision plat that I'm working on with a curved lot line. When I label this particular lot line, Civil 3D labels it like it's two different segments. In other words, instead of labeling the line as a 100 foot long arc with a radius of 100 feet, it labels it as a 60 foot arc and a 40 foot arc. I can't figure out how to combine the two segments.
All of the lots lines were created from polyline objects, and there was no break in the original line work (nor is there any indication of a break in this location when I select it).