Reducing the Roundness of a calligraphic brush to 0% seems to create 'flat' ends to a stroke, but, on closer inspection, the ends are not perfectly flat/straight.
The line seems to start and end with a slight 'S' curve; it's less visible when the stroke has a different bearing, but I need it to be gone - is this possible? I'm trying to create a calligraphic brush with perfectly flat ends.
I am using Ai Cs6. I am trying to make a new calligraphic brush. The graphic I wish to create the brush for is highlighted on my screen, and I clicked on the New Brush icon in the Brush Menu. After changing the angle, roundness and size, the only options are "fixed and random". All other options are greyed out. How do I access the "tilt" feature for example?
View 5 Replies View Relatedwhenever I try to create the effect to looks flat. The red lines stay on the top and do not wrap it suggesting the straw to be 3D. Another problem i am having is making the shadows on the straw to also look realistic.
View 7 Replies View RelatedI'm working on a reflective drawing and using gradients on strokes. I've been using pressure sensitive calligraphic brushes I made. Now I'm trying to use variable width preset profile brushes. It works fine for the first stroke, but every time I make a new stroke, it reverts back to a calligraphic pressure brush. How can I keep my brushes the same profile until I manually select it to be different? I've gone back and forth between the brush tool and pencil tool and neither will keep any basic variable width profile past the first stroke. I have to select every brush stroke and change it again and again after drawing it.
View 3 Replies View RelatedIt seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies View RelatedI am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies View Relatedhow to create a brush stroke with a point on both ends? It's fairy easy to create a stroke with a point on the front end using the Shape Dynamics, but how do I create a point on the tail end as well? I have a Wacom pen and even the sensitivity function on it can't get a point on both ends no matter how sensitive I draw a quick stroke.
The stroke on the right is the typical brush stroke I get when playing with the "shape dynamics" to get a point on my stroke. The stroke on the left is one I rendered to display how I'd like my strokes to look.
I am looking to make a brush that I can use for cartooning in CS6 that starts out thin, gets thicker with pressure (I have a cintiq), and ends in a thin line.
View 22 Replies View RelatedI'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
View 7 Replies View RelatedI am trying to stylize my .shp file lines so that they have flat ends.
View 2 Replies View RelatedI'm wondering if there is a function in AutoCAD to 'press' (crush, flatten, pinch, crimp not sure the exact or correct term to be applied) the end of a steel tube? I've attached an image of a real piece of equipment where the tube is pressed at the end with a swivelling pin. Tube is 50mm outer diameter with a 3mm wall thickness.
View 9 Replies View Related1. On the vertical upright pipes i want to make the the ends at the top flat (60mm lenght) .Can this be done from within the frame generator.
Inventor 2012
See the red srtoke, which is 100% round calligraphic brush and 1pt weight applied, 6400% zoomed.
also this one:
The stroke is not even working properly here.
When creating strokes with the calligraphic brush (using an Intuos5), I noticed that the eraser tool breaks the stroke thickness when apllied to the calligraphic stroke. The entire stroke defaults to an undesired,uniform thickness.
See video here: [URL] ...
So why does this happen? Is there some way to prevent the eraser from destroying the stroke thickness?
How can create Office 2013 flat icon style with AI CS6?What is technique that used for it? [Like use "Pen Tool" with 2px strok size for divide or .... ]
View 5 Replies View RelatedI recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
The first problem I've encountered... is I can't even draw a circle or curve with Photoshop, because there is ALWAYS a straight edge somewhere!
When I am moving the brush tool directly left, right, up or down - I can make a perfectly straight line. But when I move it in an arc shape for example, it's like it's always trying to go back into a straight line instead of just cuuuuuurve...
Know what I mean? I am no noob to computers, I think it may have something to do with pixels being squares... But the thing is, I see a lot of paintings done in Photoshop that look so photo-realistic, perfect curvature and stuff. So there is a way!
I have an exactly symmetrical geometric bitmap photoshop image (exactly symmetrical down to the pixel) which I need to convert into vector. When I import the image into illustrator and use the trace tool it does not trace both sides of the image exactly symmetrical..
Notice the trace line does not symmetrically match the bitmap.I have tried all the trace types such as 'high fidelity photo' yet it still does not trace exactly on both sides of the symmetrical image.
Is there any way to get the trace perfectly symmetrical?
I do perspective drawing for interior designers and do the coloring in Photoshop. Think of old fashioned painting with a brush/copic marker against a ruler to get a straight line, but with varying thickness or opacity. I would like the same effect in Photoshop.
The closest that I have come is to press Shift before the brush stroke. That constrains the stroke, makes a very neat line AND allows me to vary the line/brush thickness as I paint.
Often the lines may need to be at an arbitrary angle which is NOT 90 or 180 degrees. The only way I know of for getting that brush stroke in the correct position is to make sure that each stroke is on a separate layer. Select the stroke/transform/rotate. Quite a few steps as opposed to the one it takes to draw the line in the correct position and angle with a brush/ copic marker on paper.
This becomes time consuming and difficult once you have many lines to paint and if you need to be accurate (as with perspective drawing). If you are working on a very large canvas the point of rotation can sometimes be very far from where you are working (i.e. on a vanishing point) and difficult to see without a lot of Zooming and moving around on the canvas.
To Stroke a path with the brush gives an unrealistic and even line thickness which does not look hand painted. Using a ruler while drawing on a Cintiq? That may give the desired effect and be much quicker than selecting and rotating.
what I would like to know is the 'simple' way to create a keyway on a shaft in the middle that does not connect to the ends. End connecting keys are pretty basic to draw and extrude thru (maybe still a better way?)
File attached for viewing .
I'm currently using the pen tool to trace out a Nike trainer to improve my basic skills and understanding of the tool.
The problem I'm having is that I want each section of the shoe to be its own shape so that I can edit the colours individually. However when drawing each section in some places I have to draw over the outlines of already created shapes and trying to match/overlap the paths as close as possible is a nightmare. I want to have a stroke enabled on all shapes to better define them but I get areas where the overlaping sections look uneven giving the shapes very unsmooth curves where overlapping occurs.
So I am just wondering if there is a way to enable the pen tool to snap to certain sections of existing paths so I have a perfect overlap when required?
I am trying to create a seamless pattern brush in CS6 .When I use the no fill/no stroke bounding box placed behind the object to define the repeat, instead of cropping the object for the brush, it overlaps it. Here is an example:
When I do this in CS5- the bounding box works fine and crops out the space outside. Was there an update in CS6?
When I stretch an object to the right using the right hand side handles, the left side of the object also moves slightly to the right. How can I stop this from happening and keep have the left side stay perfectly in place. Is there anything in the settings I can change?
View 4 Replies View RelatedI made this shape perfectly on the pixel grid with 'Snap to Grid', 'Align to Pixel Grid', and 'Show Grid' on. Every anchor is perfectly placed (i.e. not in the middle of a pixel) but for some reason my X and Y cordinates say it's off by half a pixel. When I change the .5 to .0, it unaligns my object. Why is it doing this? There is an example below of what it's doing.
View 2 Replies View RelatedI am trying to use the "tilt" tool in the (create a new brush) panel and it is not being highlighted as an option to click on.
View 1 Replies View RelatedEver wondered how to perfectly fill an outline with touching circles? I did -- after seeing the example image in Solving design effect - image made of perfectly arranged circles.
It took me a while to get the proper calculations, but -- Here It Is! A Javascript, written for Illustrator CS4 (it might work on other versions as well), that fills a selected outline with circles. Download zipped script from my site: [URL] ...., unpack if necessary, and put it in your Illustrator Scripts folder to make it available the next time you run Illy, or anywhere else (you have to browse for it each time).
Select any path -- but no live text; you have to convert it to outlines and select each character in turn. Then run the script.
It displays a simple dialog, where you can set a maximum and minimum circle size as a percentage of the selected object size. In addition, you can select either a plain basic color, or select any of your current Swatch Groups; in that case, each of the circles are filled with a random color from that group.
The script may take a while to run. Usually, only a couple of seconds for a simple rectangle, but it may run into minutes for objects with lots of curves and/or holes. I didn't have the guts to run it on a vectorized world map, to recreate Mario "Quasimondo" Klingemann's Foam World Map; but, in theory? Possible.
This image only took a few minutes:
How do I create a new layer, then paint it with the brush a constant colour?
View 3 Replies View RelatedCan a Lightroom adjustment brush draw a straight line by clicking the start and stop points?
View 8 Replies View RelatedI'm using Illustrator CS5 - I've been trying to figure out a way to slant the ends of the lines all at once, or to create them to begin with. I've searched for a method to do this until my eyes gave out (including youtube how to's). What I've been doing is creating the lines, drawing guides, expanding the lines, then dragging each endcap anchor point to intersect with the guide and this is taking a bit longer than I would like. Is there a quicker way to get the lines in the top image to look like those in the bottom image? specifically the slant on the endcaps?
View 5 Replies View RelatedI did a parallel line using White Arror Select> Copy> Object> Path > offset. I got the parallel lines but the ends are not opened. It was Mitre selected in the popup box. Here is the image:
View 9 Replies View Relatedevery time i create a 3d object, its not at all straight when i rotate it. all the sides are uneven.
View 4 Replies View Related