Illustrator :: Stroke Resetting To 1pt - Uniform Profile In CS6 (with Brush And Pencil)
Aug 12, 2013
This was not an issue in CS5, and I can't figure out how to change it in CS6. I like to Illustrate with the Pencil Tool. I set the stroke to width profile 1 (tapered on both ends) and the stoke to whatever makes sense for my current project, and it keeps changing back to Uniform and 1pt. I have tried to get my settings to "stick" with the Pencil Tool and Brush Tool, and have had no luck. The only way I can change the stroke profile is to do it AFTER the stoke is made.
View 2 Replies
ADVERTISEMENT
Oct 19, 2012
Okay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.
View 2 Replies
View Related
Jan 26, 2014
I don't seem to be able to change my stroke in brush or pencil. It keeps resetting back to basic stroke 1pt/basic/uniform. The only way I seem to be able to go around this problem is to first paint something and then select the stroke and choose the stroke width, etc., but that's too time consuming and very difficult to work. I am using CS 5. "New Art Has Basic Appearance" is unchecked.
View 3 Replies
View Related
Oct 7, 2012
I'm working on a reflective drawing and using gradients on strokes. I've been using pressure sensitive calligraphic brushes I made. Now I'm trying to use variable width preset profile brushes. It works fine for the first stroke, but every time I make a new stroke, it reverts back to a calligraphic pressure brush. How can I keep my brushes the same profile until I manually select it to be different? I've gone back and forth between the brush tool and pencil tool and neither will keep any basic variable width profile past the first stroke. I have to select every brush stroke and change it again and again after drawing it.
View 3 Replies
View Related
Jan 12, 2013
I’m using Adobe Illustrator CS6 with a mouse rather than a pressure graphics tablet.
When I create a stroke using the Paint brush tool I would like the stroke to contain a variable width profile. For example narrower at the beginning and end of the stroke but thicker in the middle. Now I can do this by selecting the line after I have made the stroke and choosing the Basic Brush Definition from the drop down list. But if i try to draw a new line the settings are reset again. I cannot create a variable stroke while creating the stroke. The brush definition keeps resetting to 5 pt Round and stroke width 1 pt. It would be much quicker if the stroke remained as a varying width profile as I created the strokes.
I noticed the same problem with the blob brush tool except it's even worse. With the blob brush tool the stroke weight always resets regardless of whether or not I try to set a Variable width profile.
I tried deselecting "New Art has Basic Appearance" mentioned on another forum but that didn't work.
[URL]
Notice the variable width profile is maintained as the artists draws. It doesn’t keep resetting.
View 13 Replies
View Related
Dec 29, 2012
I have several brush styles that I routinely distort with custom stroke profiles. Unfortunetly, every time I change the brush style, the profile is lost. Can I prevent this from happening?
View 2 Replies
View Related
Dec 10, 2013
Why is the first dash shorter than the rest?
When I preserve the dash like this The first dash doesn't start at the beginning of the path...
So I looked up how to reverse the path and found this [URL] but my object options don't have the "reverse path" option
EDIT: I just realized that changing the direction of the path wouldn't work because it would mess up when it's too close to another path (although I still would like to know how to flip the direction regardless).
View 2 Replies
View Related
Sep 29, 2013
i click on the brush and change its color and or size then, when I go to paint it goes back to previous settings. (after that I can change its setting and it will work, but I always have to make a mark with the settings I don't want before I can change it to desired settings)
View 1 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
May 28, 2013
you can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
View 6 Replies
View Related
Sep 4, 2013
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
View 34 Replies
View Related
Jun 10, 2012
I'd like to scale a brush stroke. How do I do this?
Left is original stroke Right is resized by pressing shift then pulling box to upper right.
I found on the forum to tick preferences - scale strokes & effects but still not working?
View 10 Replies
View Related
Aug 23, 2013
I am new to Illustrator and am taking an Illustrator class. One of the excercises we are supposed to do is just tracing over a greyed-out image that is made up of one long brush stroke. the idea is to start at one end of this long stroke and follow all the curves, not letting up on the mouse button till the end. As the title states, we are using the paintbrush for this.
the brush quits putting out any color, even though I DO NOT let up on the mouse button! have tried and tried with the same result. So picture this...if you stretched this stroke out in a strait line, it might be 20 inches long, but i can only trace 10 inches of it before the paintbrush quits.
I have googled this to no avail. I am on a pc, but it is not just on one machine, as I have tried this on one Windows 8 desktop, a Windows 8 laptop, and a Windows 7 laptop, all using different mice as well. Both laptops have I7 chips with 4gigs of ram, and the desktop has a core 2 quad chip with 8 gigs of ram, so I dont think thats a problem. Just seems weird that its happening on all three machines.
Also, its not the file that Im tracing around either, because I can get the same result if I just open a new document and just start painting a long stroke before too long it quitsThis is happening in Illustrator CC. Class doesnt meet again for a week, so just thought I would ask here.
View 2 Replies
View Related
Feb 15, 2014
Why I can’t add a gradient to a brush stroke. As soon as I select the drawn brush stroke and I try playing around with the gradient, the whole stroke goes black…This is driving me nuts. And the weird thing the gradient can be applied only to the basic brush type…not the one that I need unfortunately. I’m not sure why that is…I can only add colour to the brush stroke but no gradient sadly. Is there something I’m doing wrong or a setting which prevents this from happening?
View 3 Replies
View Related
Sep 20, 2012
Anyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
View 10 Replies
View Related
Jul 11, 2013
I want to create a stroke profile with a modified brush stroke. Is that possible? Or do I have to begin with a shape?This is what I am trying to assign, but the option to save as a variable width profile is greyed out.
View 3 Replies
View Related
Aug 30, 2012
I routinely use stroke profiles to modify stokes that also have a brush appearance. When I change the brush, the profile is lost. The only way I found, to keep the stroke profile, is to save the profile before changing the brush appearance, then reasign the profile. I wonder if it is a programming oversight that deletes the profile from the stroke in this case.
I also would like to see a better method of saving/updating/editing stroke profiles. There is currently no way to overwrite a profile. Again, an oversite, in my opinion.
Stroke profiles should be available in a panel, similar to brushes. They are powerful effects, but poorly implemented.
I'm still working primarily, in CS5, but I think these features have remained the same in CS6.
View 1 Replies
View Related
Mar 5, 2013
I traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
View 1 Replies
View Related
Sep 22, 2013
I'm using a basic custom brush which reacts to pressure, and whenever I make a brush stroke with my stylus, the line doesn't appear until I lift my pen off the tablet. It's a seemingly random occurence, although it occurs in both my work (CS6 / Win7 / Intuos3) and home (CS6 / Win8 / Intuos4) setups.
View 8 Replies
View Related
Oct 3, 2012
I can't believe Illustrator doesn't do this automatically. If you create a stroke profile on one side of the stroke by holding Alt/ Option while dragging with the Width Tool and then mirror the object, the stroke profile doesn't mirror accordingly. You have to go to the Stroke panel and click one of the flipping buttons for each stroke of the mirrored artwork. This makes mirroring complex artwork very time consuming. Mirroring with transform effect doesn't have this problem but this makes the usage and editing of the mirrored object difficult.
I'm just posting this before making a feature request in case I'm missing something. And to check if this problem has been already raised and the feature request made.
Using CS5
View 1 Replies
View Related
Dec 29, 2012
A path automatically goes basic(1) weight when any brush is applied to it. Is there any way to avoid this?
View 3 Replies
View Related
Jan 17, 2013
I have a fabulous image of a painter's palette: [URL]
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
View 2 Replies
View Related
Mar 21, 2013
i have created a stroke with a calligraphy brush. Now i want to make the stroke a bit thinner at some points of the path.
It could be easily done with the width tool but it doesn't work directly on the stroke.
Is there a way to convert the stroke so the thickness of the stroke will be kept at the other points?
View 13 Replies
View Related
Jul 30, 2013
i have made a custom stroke width profile and want to back it up for future use i found two files called variablewidth or something but the date modified wasn't congruent to when i created the profile.
where can i find the files that contain this preset to back up?
View 3 Replies
View Related
Feb 11, 2014
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 Replies
View Related
Dec 26, 2013
It seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies
View Related
Feb 24, 2012
The pencil tool normally doesn't do antialiasing. However, when I stroke along a path with the pencil tool, the result is antialiased anyway. How can I fix this?
View 1 Replies
View Related
Jan 31, 2013
I'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
View 7 Replies
View Related
Jan 7, 2013
In Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies
View Related
Oct 2, 2012
I recently purchased premier pro 6 after working with Inkscape and GIMP for awhile. I am trying to figure out some things that I used to be able to do in Inkscape. In Inkscape, you could change the thickness of a calligraphy stroke based on the speed that the cursor moved. It was called "thinning".
View 2 Replies
View Related
Dec 27, 2012
I'm using gimp 2.8.2 on debian wheezy and have a little problem, which can be reproduced like this:
File -> New (image size 640x400)Ellipse selection tool 60/60 500x280select -> to path
select -> none
Pencil tool settings:
mode: normal
opacity: 100.0
Brush: 2. Block 01
Size: 80
aspect ratio: 20
angle: -45
Edit -> Stroke Path (stroke with a paint tool -> Pencil)
At the top and bottom of the ellipse the outline is discontinued.
With View -> Zoom: 800% the stepsize for the applied pencil can be counted. I count a gap of 8 pixels, but I found no way to configure the stepsize.I'd like to have the pencil applied each pixel along the path.
View 2 Replies
View Related
