I'm writing a tool to change iproperties in the titleblock.
But now we start using two different types of titleblocks.
I need to check which titleblock is present in the current sheet/drawing.
I use this code to place a titleblock:
Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")
How do I check if "sample_titleblock" is already present?
Autodesk Inventor Product Design Suite 2013 SP1.1
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
I am trying to change the titleblock definition of a drawing when I run my custom ilogic code. Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:
Currently the textbox for the part number is configured as below:
And I'd like to change it to this:
The code I have to find the part number is as follows:
Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =
[Code]....
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies View RelatedI'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.
View 3 Replies View RelatedI have just managed to create my own title block and have an area within for material. I always use the iProperties to populate the titleblock but there isnt a field for material? Is there a way to add a field so it does what i need?
View 4 Replies View Relatedis there a way to see the titleblock info of multiple sheet .idw's in vault explorer? I want to export the masterdata from all my .idw - files + sheets in one excel.I'm using Vault basic 2013/Inventor 2013
View 1 Replies View RelatedThis is a 2 fold question.
I have a drawing with 18 viewports, each one has (should have) a titleblock but xref manager tells me it is not found. Firstly, why would it now not be attached? And secondly, why am I not simply able to re-reference it? I tried to UNLOAD and DETACH it but it wont do it as there are multiple inserts. So I tried to RELOAD and ATTACH but no joy. It simply gives me the path to the referenced file (which is correct by the way) So, how do I reload the titleblock to each layout?
I have 2 files and I'd like to copy a titleblock from a template drawing and use it to replace an existing titleblock on an in progress drawing. The titleblock on the in progress drawing has attributes, and I'd like to keep them when I put in the new titleblock. The attribute tag names between the 2 titleblocks are the same.
I do not know the exact names of the titleblocks, only that they contain the words "title block" somewhere in their name.
I've developed for Inventor for a while now, but I'm completely new to AutoCAD. How might I go about this?
I believe the basic steps would be something like this:
1. Identify which object to copy from template sheet.
2. Save that object to memory
3. Identify object to replace in existing drawing
4. Copy attributes and get position of existing titleblock
5. Delete existing titleblock
6. Insert new titleblock and copy in attributes
I've taken the Autocad tutorials, and I've searched for relevant posts on ThroughTheInterface. Is there someplace else to look which might give a more in-depth example of what I'm trying to accomplish?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
If there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?
View 3 Replies View RelatedMy hospital has been bought out by another hospital. Is there an easy way to change my titleblock. I am using project navigator and I have changed my templates.
View 2 Replies View Relatedhow come when I insert an image (BMP) into my drawing border and then create a PDF, the graphic looks choppy?
I am using AutoCAD 2010. I am opening the BMP up in Paint, then copying and pasting into drawing titleblock.
I have an Inventor license that doesn't include Autocad. We have some old Autocad drawings that I would like to write a program to extract the titleblock info which I believe is probably done with attributes. Not sure though.
is there any way for me to get to that info without having a seat of Autocad? In Inventor we can use apprentice to do similar things.
I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?
View 9 Replies View RelatedI need to insert a barcode into my drawing titleblock. I have the font loaded that I need, I just can't get it formatted so my barcode reader will read it. I am using the field "filename" to drive the text in the barcode. My issue is I need and asterisk as a prefix and a suffix to my file name so my barcode reader knows where to "start and stop". How can I format the field "filename" with an asterisk (*) as a prefix and suffix?
View 4 Replies View RelatedI am working on a new project which is now at building control stage and am doing the following workflow:
View 5 Replies View RelatedWhenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.
View 2 Replies View RelatedWorking in AutoCAD 2013
Plotting from the Layout - Model is plotting fine, XREF Titleblock is plotting out too light, about 20% of what model plots.
XREFd on 0 layer (tried on different layer, result = no difference) all other aspects of plot are correct
XDWGFADECTL set at 1
LAYLOCKFADECTL set at 1
Print Preferences
- line and text (not photo)
- dpi 600
I found a work-around but it isn't realistic in the longterm, I inserted the Title block as a BLOCK and exploded it, and then the titleblock plotted fine with each of the different Title Block layers plotting correct to pen width.
When I attach a titleblock as an xref in paperspace, it is not lined up on my page that I have set up. It attaches to the upper right hand corner of my screen and I have to manually move it on top of my paperspace. I know there is a way to have them automatically line up.
View 2 Replies View RelatedIs there a way to change the saved version when running a titleblock update?
Even though my save preference is set 2010, anything saved during a titleblock update is in 2013.
Noticed this in 2013 & 2014
I got this weird issue when placing my custom made titleblocks in AutoCAD. All the attributes of the block jump to standard text style when placing it in my drawing. Allthough this ain't allways happening. It seems to me like there's a setting for this but i can't find out how.
It can happen suddenly too. Like when i open a new drawing and then add my titleblock, it's like it should be most of the times. Allthough when i start to edit the block (scale/move/copy,etc) it can change like you can see in the drawing below.
Offcourse, as a company, you do not want to deliver your drawings with a titleblock like this.
I have a problem with some of our drawing sheet attributes that we are updating from a CSV file. The attributes are originally in Arial Bold but when we run the update routine the font disappears, if we run the update routine a second time it reappears correctly updated but the font has changed from Arial Black to Standard.
I have rebuilt the titleblock and get the same result.
I cant get into the routine because its locked away in an FAS file and the manager is on holidays for a couple of weeks.
I have created a new layout from Templates that are the C3D standard templates. I get the below messages in my command bar and subsequently my template does not have any of the blocks, north arrow...nothing. Just a blank sheet. Why? See below messages that I copies from the command bar....
Command: <Layout from Template>
Duplicate definition of block _ClosedBlank ignored.
Duplicate definition of block AeccTickLine ignored.
Duplicate definition of block AeccTickCircle ignored.
Duplicate definition of block North ignored.
Duplicate definition of block Graphic Scale - Imperial ignored.
Duplicate definition of block ANSI D Title Block ignored.
I created a custom template family for a 36"x24" titleblock. now, I need to create one for a 24"x18" template family. My issue is, what is the easiest way to do this?
I cannot copy and paste content from one family to another for some reason (unless I am doing something wrong). I was thinking the easiest way is to copy the family, rename it and move the content around so that it becomes a 24"x18" template - BUT - does this affect how it plots?
I have Revit 2012. Trying to import a titleblock from Architectural Desktop 2006. When I follow the User Guide guidelines I get to step 3 and then this message:
"Import Geometry Not VisibleThe import geometry will not be visible in the view using the current settings.The origin of the import will be centered on the origin of the model instead. You can view the import in any view where its geometry is within the extents." The ZF command only opens up the Import CAD formats window. The original titleblock is in modelspace of the dwg file.
My titleblock seems to be corrupted and I can't edit it. I need to edit some text on it (highlighted), so when I am on the sheet view in the project I select the titleblock and click 'edit family.'
When I load it into the project I get this error. I would happily create a new titleblock, but I this is used in many places, so I need to edit this one. I tried to upload my Revit Error Report, but this forum is saying it is not a valid extension.
I have been having this issue in both Revit Architecture 2012 and 2013. I have loaded in my parameters for my title blocks ("Addition", "City, State, Zip", "Address", and "Lot#/Block#) in the same way I have done it in any other project. but for some reason in this project after I have loaded in my parameters and set them to my sheets and I am still not able to select them and edit them on my sheets.
View 1 Replies View RelatedI would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View Relatedi dont know how to use or find the PCD function. All i have is a base however i need to make holes with 90 degrees on a 100 PCD
View 2 Replies View RelatedI can get the DWG translator Add-In with :
Inventor.TranslatorAddIn dwgAddIn = (Inventor.TranslatorAddIn)InventorOpen._invApp.ApplicationAddIns.get_ItemById("{C24E3AC2-122E-11D5-8E91-0010B541CD80}");
But I can't find ID for JPG.
Is there a way to print an area larger than my titleblock, so that I can include the border defining the edge of the paper in the final printed pdf?
My workflow requires me to open the pdf in illustrator and make adjustments before a final print. I need the boundary printed so that I can scale the drawing inside illustrator back up to proper size.
Maybe I need to make a custom titleblock with a larger boundary?