is there a way to see the titleblock info of multiple sheet .idw's in vault explorer? I want to export the masterdata from all my .idw - files + sheets in one excel.I'm using Vault basic 2013/Inventor 2013
View 1 RepliesI have an Inventor license that doesn't include Autocad. We have some old Autocad drawings that I would like to write a program to extract the titleblock info which I believe is probably done with attributes. Not sure though.
is there any way for me to get to that info without having a seat of Autocad? In Inventor we can use apprentice to do similar things.
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
View 5 Replies View RelatedI have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
So a quick search came up with "don't open from the Vault; open from within Inventor."
Lets not have that arguement.
My office just upgraded from Inventor 2009 to Inventor 2010. 3 seats, all installed the same way. When the other two users open something from the Vault, and then open a 2nd file (be it a drawing/part/assembly), it opens as a new window within the same Inventor session. (Just like it used to in .../2008/2009).
When I open from the Vault, it starts a new session of Inventor. This is frustrating, when you have an assembly open, modify a bunch of components, and then want to open their respective drawings to update them... the drawings will open in new sessions when opened from the Vault.
Obviously I've got something changed somewhere. Quick search through the Inventor options came up with nothing. Vault options?
Please don't tell me to start opening files from inside Inventor... that's a waste of my time... and everything has worked fine until this fresh install of 2010.
working on one big file with Vault/multultiple user scenario?
Lets say you design a car and having the frame and the body you have different guys that come in and do electrical, fuel system, so on... They need to work with the frame and the body doing their parts, since thats the reference for them.
But only one guy can check it out. We try the approach that one system is an entire independent assembly inserted into the top assembly but its not perfect.
Is there any way to cause Inventor to convert a multi-sheet IDW to an Autocaf DWG file that puts each IDW sheet on it's own tab in the dwg?
IDW ---Sheet 1, Sheet 2, Sheet 3, etc
DWG - Tabs for Sheet 1, Sheet 2, Sheet 3, etc ALL IN ONE DWG FILE
This so we can do batch printing and not have to maunually assemble dwg file with multiple tabs from the individual dwg files generated by Inventor - as near as I can tell, there is no way to get Inventor to NOT create a separate dwg for each sheet in the IDW???
I have a multi sheet drawing I am creating. My BOM is on the first sheet.
I have noticed that when I place views on my subsequent sheets, the balloons restart from item 1 again. Is there a way to link them to the BOM on sheet 1?
(Colossians 3:23-25)
I have an assembly of multi-thickness, thin sheets, essentially welded together. (see image attachment)
One component is composed of land and bay areas, a single planar sheet where the edges are thin, and the central body is thickened.
I can get Inventor to treat the remaining multi-thickness, right angle components as midplane by going with separate bodies.
The top plate is a single planar sheet, and Inventor will not treat it properly as a mid-planed plate.
Will Inventor translate the constraints properly if I build the thin region separate from the central thicker region in order to produce feasible mid-planed mesh?
Question already posted by other in forum - using local control to develop multiple element thicknesses through cross section of plate (by thin face selection), one cannot verify that the smaller elements along the cross section are built properly through the entire component.
Is there a way to split this part into multiple parts? I would like to split the part on the corners, leaving a small gap for welding.
View 7 Replies View RelatedHow to curve a piece of sheet metal over the outside curved edge of the attached part. I can do it the old fashioned way but was wondering if it could be done in sheet metal which would give me the flat pack automatically (that way there is less chance for errors). There are several of these baffles joined together by a spine and the sheetmetal will eventually go over all of these, and have a few modifications to shape the end profile.
The outer curve is a spline which has changing radius and hence to use a contoured roll would be rather difficult and time consuming (there are also some flat sections at each end of the curves as well).
Autodesk Inventor Professional Student 2013 is the version I'm using.
How people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
I have a part in which one of the folds needs to be done at assembly and not during manufacturing of the other bends.
Is there a way I can show this so that the manufacturing print sees exactly what they need to do and nothing more but then on the unit assembly the assemblers see that the unfolded tab needs to be folded down?
Can this be done all in one part file?
I'm writing a tool to change iproperties in the titleblock.
But now we start using two different types of titleblocks.
I need to check which titleblock is present in the current sheet/drawing.
I use this code to place a titleblock:
Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")
How do I check if "sample_titleblock" is already present?
Autodesk Inventor Product Design Suite 2013 SP1.1
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
I am trying to change the titleblock definition of a drawing when I run my custom ilogic code. Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:
Currently the textbox for the part number is configured as below:
And I'd like to change it to this:
The code I have to find the part number is as follows:
Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =
[Code]....
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies View RelatedI'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.
View 3 Replies View RelatedI have just managed to create my own title block and have an area within for material. I always use the iProperties to populate the titleblock but there isnt a field for material? Is there a way to add a field so it does what i need?
View 4 Replies View RelatedWhen I try to open ANY inventor file from Windows Explorer I get this error
I don't know why, the initial inventor splash/opening screen come up as normal, Inventor 2013 is the associated program by default, so I stuck as to why this is happening now when it never used to. I've not made any changes to my system, not installed any new software etc.
Inventor 2013 Pro
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedIs there anyway to fill out a file info (description, author, author title, etc..) once and then apply and save it to multiple pictures?
View 2 Replies View RelatedI have is that after so long thumbnails in windows explorer stop loading just shows generic Autodesk image(.ipt, .iam, .stp, .idw, .dwg ect.). Causing me to be unsure on which file I'm actually opening. Causing me to have to restart the computer.
What is weird is you are able to see the thumbnails in the thumbnail of the parent folder but when you open the folder they aren't shown. If you open up properties it shows a thumbnail.
Closing and opening a new window doesn't fix this error.This was an issue I had experienced with 2011 and am still experiencing with 2013.
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies View RelatedA collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedWhen I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
View 1 Replies View RelatedI need to find a way to export the file info frrom many images back to a word or excel file. Does anyone know how to do it.
I can't even get the information out of one image file without the old copy and paste one field at a time, and have several hundred to do.
Just to clarify, the info I need is when you rightclick on the title bar and choose file info, and choose "description" then akk the fields on the right.
Is there a way to browse the Content Center without using Inventor. I am using Inventor 10 with a shared custom content library set up on a separate server. I would like to publish many of our commonly used custom parts for our engineers to search on without having to buy a seat of Inventor for each of them. They would just use it to search, not actually use any of the parts.
View 4 Replies View RelatedI need my colleagues and customers to view some of the models I create, and be able to manipulate them.
No matter how much I ask, they ar not going to download a viewer - they just throw up their hands and say "can't, shan't won't". So I end up having to take numerous screen dumps and print, which in reality are much less useful.
I have seen components by some of our suppliers (though I cannot find an example now) online and viewed in Internet Explorer where I can view, manipulate, and even section their 3d models without needing to worry about viewers.
How this can be achieved with Inventor Assemblies?