AutoCAD Inventor :: Titleblock - How To Display The Units Shown
Oct 24, 2012
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 3 Replies
ADVERTISEMENT
May 18, 2006
If there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?
View 3 Replies
View Related
Mar 11, 2013
I'm writing a tool to change iproperties in the titleblock.
But now we start using two different types of titleblocks.
I need to check which titleblock is present in the current sheet/drawing.
I use this code to place a titleblock:
Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")
How do I check if "sample_titleblock" is already present?
Autodesk Inventor Product Design Suite 2013 SP1.1
View 1 Replies
View Related
Oct 8, 2013
Can you display the order in which images are shown within an album, (like you could in PE10), other than the stupid Oldest and newest that you now get with PE11?
View 2 Replies
View Related
Sep 10, 2013
I am trying to change the titleblock definition of a drawing when I run my custom ilogic code. Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:
Currently the textbox for the part number is configured as below:
And I'd like to change it to this:
The code I have to find the part number is as follows:
Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =
[Code]....
View 3 Replies
View Related
Aug 28, 2012
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies
View Related
May 28, 2012
I'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.
View 3 Replies
View Related
Jul 12, 2013
I have just managed to create my own title block and have an area within for material. I always use the iProperties to populate the titleblock but there isnt a field for material? Is there a way to add a field so it does what i need?
View 4 Replies
View Related
Dec 9, 2013
is there a way to see the titleblock info of multiple sheet .idw's in vault explorer? I want to export the masterdata from all my .idw - files + sheets in one excel.I'm using Vault basic 2013/Inventor 2013
View 1 Replies
View Related
Oct 30, 2013
I am trying to cut sections using Inventor I will begin by saying I am a fairly new user. On numerous occasions I am running into an issue where the section cuts are not shown correctly? I have attached an image showing an example of what I am talking about, you can clearly see that there are bolts and plates that should be displayed in the section cut which is shown above.
View 6 Replies
View Related
Oct 24, 2011
how to create the dimension shown in an idw?
View 9 Replies
View Related
Dec 18, 2013
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
View 1 Replies
View Related
Aug 4, 2012
I use INV 2013. MOVE THE END OF THE PART DOWN TO SEE WHATS HAPPENING. (MOVED TO REDUCE THE FILE SIZE). I am trying to split the solid using the surface as shown.
But, I am unable to do so. Also, I need to create a new surface with 0.50mm offset to create female form die.How to do it.
View 3 Replies
View Related
May 14, 2012
there's a bug in my file. but
system unit is set to 1cm.
display unit is set to 1mm.
I measure the geometry at the side. its about 6355mm
I put a dummy @ base where I measured it with the tape measure.
I move it up 6000mm and it goes way off.
View 2 Replies
View Related
Jan 11, 2013
How do I make the dimension shown black instead of pink? I had to suppress the fillet from the drawing in order to grab the edge to get the true dimension then when i unsuppressed the fillet the dimensions turned pink. I also used a section view but that did not fix my problem either.
View 9 Replies
View Related
Apr 18, 2013
We are having a little trouble with a .dwg we need to create. (we create all are drawings that would be .idw as .dwg so users of light etc can view and mark up the files.)
The part has a Perspex (to represent glass) front with some framework behind the Perspex. We have created a base view of it in a drawing and can see through the Perspex when the view is in render mode, but if we switch to hidden line removed (as our drawing standards dictate) all the detail behind the Perspex disappears.
Is there a way to make the Perspex part transparent when the view is in Hidden Line Removed mode.
IV12SP2 Win7 64 16gb
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
View 4 Replies
View Related
May 5, 2004
Is there a setting or something somewhere that turns off/on the display of the origin folder? I have rebooted and restarted Inventor. For some reason, I can't get see the folder. Even when I edit a part, it is not there. See attached images.
View 5 Replies
View Related
Jul 23, 2012
I am currently having trouble creating a decal, i have inserted the jpeg image on an ipt file, as i also need to use the .ipt when designing current projects, but when i project the ipt onto a dwg the ipt is just shown as being completley greyed out? i know how to insert the image straight into the DWG file but for what i need it just isnt enough?
Is it possible at all to bring the jpeg image into an ipt. and have it show on the DWG file also.
View 7 Replies
View Related
Jan 25, 2013
I have common parts (custom frame member) that I use repeatedly in assemblies that I don't need to show in a parts list. Is there a way to control this so they don't show up in a parts list? Currently I go into the parts list and turn them off before exporting the list.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Sep 19, 2013
Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
View 2 Replies
View Related
Feb 26, 2012
Is it possible to make an i part or i feature of the beam end shown in snapshot (every thing except back to back channels) i.e., couples of holes at certain distance attached with some plates etc, so that it can be populated to identical locations.
View 2 Replies
View Related
Sep 10, 2013
Our school rercently updated to Inventor 2014, When working starting a new assembly we seslect the standard mm ipt icon, however as soon as you create a new compont it defaults to inches, we can change the units using styles editor, but this only changes this componont when you create another part it also defaults to inches.
Can you change the setup so that it will always be in mm.
View 5 Replies
View Related
Apr 11, 2013
I created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies
View Related
Feb 21, 2012
I am using IV 2010. I am trying to make a 5/8" sheet metal piece with the surfaces shown. I have tried to thicken the surfaces but do not get the results I am looking for. After the surfaces are thickened I need them to be able to lay flat with flat pattern command.
View 4 Replies
View Related
Jun 20, 2013
We are using Inventor 2013 (Windows 7) and am trying to import an assembly created by a third party using AutoCAD. For the sake of this question let's assume the AutoCAD file contains a cube which is 10 x 10 x 10 units. The part should be 10 x 10 x 10 mm in size. We don't use AutoCAD so are unfamiliar with it but it appears to have no specified units, I could be very wrong here!
In Inventor we import the .dwg file and the cube is 10 x 10 x 10 inches in size.We can't figure out if the person who constructed the cube built it too large (reading mm off the drawing but constructing it using inches) or if we have missed something when importing the file into Inventor. We could scale the AutoCAD assemby but this could lead to a small but significant margin for error so we want to understand what is happening first.
View 9 Replies
View Related
Aug 15, 2011
Inventor 2010
- I have drawing partslists with parameters that change automaticly
- Based on a main assembly with a customized structured BOM, with information I fetch from the individual parts exported parameters (Ex. =Length <part-length>)
- The main assembly is based on many sub-assemblys
- Based on "Make Component" skeletonmodels
- Based on embedded EXCEL worksheets in where I control my parameter values.
Now the problem expl.:
- Total I have about maybe 50 parts, witch have 15 parameters each, that I need to control this way.
- In every single part I have derived it's parameters from the skeleton part, and exported them.
- On some parameters I don't want to show the units, in most of the parameters I don't want the trial zeros.
So in the individual parts parameter table I choose "Custom Property Format" for the exported parametern in every individual part.
-uncheck "Trailing Zeros" and check "Apply to existing...", then uncheck "Unit String" for some parameters.
I lot of setup work with 50 parts, 15 parameters each (750 individual parameters).Every time I change a dimension in the embedded EXCEL worksheet, ex. a pipe dimension and thickness, a diameter for a revolved feature and so on, the units go back to it's default values again and I have to do all this parameter setup "Custom Property Format" again.
View 2 Replies
View Related
Mar 27, 2012
I want to change the default precision shown in my drawing from two decimal places to three. In my .idw file the "Units" tab does not seem to be there. I see Standard, Sketch, Drawing, Sheet. I could change each dimension one by one, but there's got to be an easier way.
View 2 Replies
View Related
Aug 17, 2012
My drawing template title block has a section for estimated weight. This value and overall size is used to determine shipping methods of our products. This value is pulled from the Type->Physical Properties-Model and Property->MASS. There is no option to turn off units. When our clients look at the drawing, they often get confused with lbmass unit. example; When someone asks what the weight of the product is, we dont say it is 1300 pound mass, we say it is 1300 pounds. I have looked around all different forums and found no complete answer or solution to this.
The only thing closest to a solution that I found on this forum is to create a rule that creates a custom iproperty within the model. [URL]........
You then have to create a text field in your title block that populates from that custom iproperty but can only be done when a base view is inserted from a model that has the custom iproperty rule applied.
From what I have tried, you can create a .ipt template to save you from creating that rule to create a custom iproperty each and every time, but to populate the title block field, a user needs to create that text field and draw from that custom iproperty once the base view is set on the drawing.
I also found a way to incorporate mass without units but the information will be put into the parts list. So instead of the weight being "automatically" entered into the title block after inserting base view, I could create a parts list for every drawing. (Not a good solution) [URL].........
One last solution that I found, is there used to be a tool called iProperty Collection[URL]....... that gave users the ability to customize some Inventor functions. One being the ability to change the unit displayed for MASS. I haven't tried using this tool because the last update off the website stated in 2009; says the software is not compatible with Inventor 2009 64bit, since I am using Inventor 2012 64bit, I think this is a dead end.
View 9 Replies
View Related
Aug 2, 2013
I have a BOM that shows up as in units for length items and unitless for qty items. When I change the UOM to use FT units the non-length units get inch ticks. The qty 1 which means I need one shows up as 1" where I do not require a 1 inch part but one each. How do I remove the inch ticks?
View 5 Replies
View Related
Aug 3, 2012
It seems that parameters can not mix units. You can not use in or ul in a deg parameter. I want to roll a cylinder using a contour roll but I want the cylinder to have about an 1/8 gap at the seam no matter what the diameter of the cylinder is. So in order to calculate the calculated rolled angle I need to use "360-((0.125/CYLINDER_DIAMETER)/0.017453292)". I can not seem to get this equation in the parameter value because it has mixed units or in the multi-value custom equation. I can make another parameter that is ul and have it calculate it but I can not feed this value back to the contour roll parameter. I assume that the calulated parameter is ul and the contour roll parameter is deg.
View 2 Replies
View Related
Nov 8, 2011
I'm using Ineventor 2012 to export files ive made to cut them out on a CNC i recently bought. Ive been having problems with the CAM software im suing to genrate toolpaths (MeshCAM) making the part smaller than it actually is, so i made a 1"x1"x1" cude and imported it to MeshCAM, it imported the demensions 2.54x2.54x2.54 Why is invortor exporting the stl in metric not english units?
View 1 Replies
View Related
