AutoCAD Inventor :: JPEG Inserted Onto IPT File Shown As Greyed Out On DWG?
Jul 23, 2012
I am currently having trouble creating a decal, i have inserted the jpeg image on an ipt file, as i also need to use the .ipt when designing current projects, but when i project the ipt onto a dwg the ipt is just shown as being completley greyed out? i know how to insert the image straight into the DWG file but for what i need it just isnt enough?
Is it possible at all to bring the jpeg image into an ipt. and have it show on the DWG file also.
I am trying to use a shared project with my other colleagues. Problem we are having that we are not getting into how to change the File Check in/out Status (option is disabled/greyed) . Do we required administrative rights to do that?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
I cannot see any GPS data on my jpeg photos in Lightroom 4.4 (was the same in 4.3), I add the data on the computor using JOBO photoGPS softwear, lightroom works fine with RAW files GPS data but not that added to jpegs, post capture. I shoot Raw files and jpegs with both a Pentax K-x and a Sigma DP1 then add GPS data recorded at the time with a JOBO GPS unit attached to the hotshoe.
If I use my new Pentax K-30 with a Pentax GPS unit which adds GPS data in camera, there is no problem, Lightroom shows this, RAW and jpegs.
The JOBO unit software give better additional metadata information, addresses etc than the Pentax unit, though it does take more work to use.This issue effects uploads to flickr as there is no GPS location then shown there.
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM Times for this drawing: Created: Thursday, March 27, 2008 5:49:57:104 PM Last updated: Tuesday, April 23, 2013 4:10:56:299 PM Total editing time: 17 days 15:31:26:967 Elapsed timer (on): 17 days 15:31:26:967 Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. The Image button on Insert panel under Manage tab is always disabled. I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
I have a drawing on which I am going to need to show some photos of the assembly in its installed condition. When I attempt to insert an image, I get very low image quality that is giving me flashbacks to mid-90's video games. I do not get any sort of errors, missing images, file names displayed instead, etc. The image appears, but simply looks terrible, both on the screen and if printed or converted to PDF.
I have tried inserting the image as JPEG, PNG, and BMP, all with identical results. It is not unique to these images, and in fact occurs even if I try inserting images that Inventor created in the first place. Searching on these forums indicates that changing file associations for BMP files to Paint may be the answer, but most of these posts are rather old.
Since my IT department has me locked out of changing these associations for myself, I'd like some confirmation that this is still the likely cause before I go through the red tape of an IT service request.
I'm trying to make this assembly flexible in that the bar will flex so the "s-clip" can hold the 2 handles together. I read some of the forums about the scissors assembly in the autodesk folders and I can see it working in that assembly btu can't figure out how to make it apply to mine. It is basically one of those camping grills that makes hot sandwiches or pies.
If I insert a part with my own work planes in an assembly, I can programatically get the first 3 standard workplanes and also the non standard workplanes.
BUT if I make the part a table based iPart, I cannot find the extra non standard workplanes in the WorkPlanes of the part component definition, just the first standard three (XY YZ XZ).
I insert parts in an assembly, new parts from content center or from a library, without projected edjes, they are free to move until i impose the first constraint, the axis to axis alignment of round parts, then i cannot move them anymore in order to continue constraining them
I have a model with 12 circular connectors placed (constrained) in the housing surface. well 11 of them are. The last one WILL NOT behave. when i use the insert constraint (or any constraint) the model of the connector modifies itself and becomes a new model with errors.
i have deleted it from the assembly, saved, closed, opened and when re - inserted have the same problem.
I have re-saved the connector model from its original location to the library folder, re-inserted and got the same problem. The connector model is fine in the assembly up until i try to constrain it.
all the connectors were drawn the same way, using parameters, and saved into the same library folder.
I don't understand how adding a constraint can cause a model in a diffferent folder to be modified.
Windows 7 64 bit Inventor 2012 Professional Dell T1600 CPU E31245 @ 3.30GHz 8 GB RAM
I am running into some trouble with user parameters that have been inserted into a dimension's "text box". I sometimes hide the dimension itself and insert these parameters so that iLogic can manipulate the upper & lower tolerance limits for a dimension.
The problem seems to arrise anytime one of the dimension's arrows becomes detached from the drawing (and perhaps for other reasons, too, although this is the only clear cause so far). I can reattach the arrow and the dimension seems healthy again, but if I go into the text editor, I notice that the link to any parameters that I've inserted has been lost. They appear as they were last set, but will not update if the parameters themselves change.
Is there a better workaround for this, or can we expect a solution in IV2013? I've invested close to a year's worth of work expecting this method to perform properly, and it will be a letdown if there's no solution.
When I add an image to my sketch the main body then appears "of the ground" as you van see from the attached screen shot. The shadow and reflection is distant. The minute I remove the instead image the object and the shadow touch again as it should be.
I have a drawing with several tables that are inserted Excel objects. In some cases, the tables are truncated after the tenth row (although some tables longer than ten rows are not truncated). I can't find any difference between the tables that would explain it.
Print to JPEG in LR5.2 produces a corrupt JPEG file that cannot be opened.
Lightroom is running on MacPro. When printing I am attaching an ICC profile provided by the bureau that is going to produce the prtins. Having said this the file cannot be opened neither on a Mac nor on a Windows PC.
Up until now, i used to exported as TIFFs but after reading Jeff Schewe book The Digital Print i have become convinced that printing through LR to a file is much more efficient.
I am trying to cut sections using Inventor I will begin by saying I am a fairly new user. On numerous occasions I am running into an issue where the section cuts are not shown correctly? I have attached an image showing an example of what I am talking about, you can clearly see that there are bolts and plates that should be displayed in the section cut which is shown above.
I have a symbol that when I insert it into my dwg, I would like it to trigger a rule to create custom properties and fill out those properties. Ive already created a rule that is 100% working, I am just curious if its possible to have that rule triggered when I insert a specific symbol?
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
I have one Inventor Pro 2012 SP1 user who is trying to insert a bmp image into a sketch so he can create a decal and the image appears blank and gray. See the attached screen capture. We converted the bmp to a jpg and we get the same result. When I insert the bmp into a sketch on my workstation and it views correctly. I've logged into the same workstation as the user who is having the problem and the image also views correctly. I tried to change the file associaiton from Microsoft Picture View to Paint and I get the same result.
Here are his workstation specs:
Dell Precision T5400 - Xeon Quad Core - 2.93 GHz Windows XP SP2 - x32 4 GB RAM Nvidia Quadro FX 570
I want to shoot tethered in studio, and shoot RAW + JPEG, but I want Lightroom to only import the JPEGS so as to improve the speed. I shoot a Canon 7D.
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
