AutoCAD Inventor :: Perspex Not Shown As Transparent In Drawing View
Apr 18, 2013
We are having a little trouble with a .dwg we need to create. (we create all are drawings that would be .idw as .dwg so users of light etc can view and mark up the files.)
The part has a Perspex (to represent glass) front with some framework behind the Perspex. We have created a base view of it in a drawing and can see through the Perspex when the view is in render mode, but if we switch to hidden line removed (as our drawing standards dictate) all the detail behind the Perspex disappears.
Is there a way to make the Perspex part transparent when the view is in Hidden Line Removed mode.
IV12SP2 Win7 64 16gb
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
View 4 Replies
ADVERTISEMENT
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
Dec 14, 2013
I have a drawing done by a colleague. The problem is the blocks not shown in multi view.... I checked the layers and isolation but i cant find the solution.
View 4 Replies
View Related
Jan 26, 2012
I am having an issue with a drawing, I have an assembly running in Inventor, the parts appear to be in a transparent mode, it is actually a translation from CATIA V5, everything seems to be ok, but when I open a drawing to create dimensions, only the parts that are not transparent appear in it.
View 4 Replies
View Related
Feb 8, 2012
Simply, I have Xrefs showing up in my Drawing correctly, but they are not listed in my Xref Manager. ?
If it makes a difference, I did move the Host Job Folder into an Archive. So normally my XRef links are broken but still they show up in my Xref Manager and not in the Drawing until I re-path to the new location. This is because I didn't use Relative Paths, which I am starting to use now.
View 9 Replies
View Related
May 9, 2013
I'm working on a Isometric drawing and im trying to dimension the view. I keep the original view there and cut another of the same view and place that cut view over the original, so I have something to snap to while dimensioning.
Every time i go to place the cut view over the original and i always grab the wrong view and move it and I am wondering if there is a way to pin the original view in place permanently?
View 6 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Jan 29, 2013
Is it possible for a civil 3d structure to be displayed correctly in profile view when the alignment does not pass through the insertion point of the structure. See the attached screen capture.
The rectangular structure is a storage tank and there will be a pipe coming in on one end and the exit pipe will be on the adjacent side at the far end, just as the alignment shows - but the structure doesn't show correctly, or now how I expected.
View 3 Replies
View Related
Sep 6, 2013
Is there a way so that when I make a view in a drawing,
it shows up by default with all it's real lines, instead of having to select the options all the time...
View 5 Replies
View Related
Jan 31, 2012
For inventor drawing, is that possible to copy a view from one drawing to another different drawing?
View 2 Replies
View Related
Sep 11, 2013
i have assembly and i want make drawing of part of it. Part of assembly i want to show/draw is between two parallel planes. How can i do this?
I'm using inventor 2010.
View 2 Replies
View Related
Jan 3, 2012
I've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies
View Related
May 31, 2011
I have a 3/4 sectioned view rep (Locked) in an assembly. On a drawing, When I select the correct view rep,
- I don't get the save view orientation ( though It show/hide the correct parts). I was expecting this because I had locked in 3D
- I don't get to see the 3/4 section.
View 2 Replies
View Related
Jul 11, 2013
Is it possible to rotate a drawing view using iLogic?
View 2 Replies
View Related
May 24, 2012
In the continuing persuit to learn Inventor, of this selection in the drawing view editor?I have noticed one thing. When it is checked it turns off the visibility of parts within an assembly view.
View 9 Replies
View Related
Oct 18, 2011
I have an assembly that is derived from a solid body part. The assembly can rotate in the part hence the .iam that was created using Make Components also rotates. The trouble is I need to make a template drawing showing the assembly in the same position all the time.
Is there a way to make a base view always look at a surface and follow that surface so that the view on the drawing always looks the same?
For example: If I had a dice and I create a base view of the two dots side of the die. If I roll the die I still want to see in the base view the two dots side of the die in the same orientation.
View 9 Replies
View Related
Sep 3, 2013
Having this dialogue box pop up every time i print. Not sure what a raster view is and how I should be turning it on /off.
View 6 Replies
View Related
Nov 8, 2011
I am using this code to turn visibility of components off in IDw file, what I need top turn visibility of a component of in a subassembly.
'oDrawingDocument = ThisApplication.ActiveDocument
'Get the first view
'Dim oView As Inventor.DrawingView
'oView = oDrawingDocument.ActiveSheet.DrawingViews.Item(2)
[Code] .........
View 2 Replies
View Related
Aug 24, 2011
We are sometimes faced with the problem that we would like change the coordinate system of the model and have the drawing update it with the new orientation of the part without the need to place every annotation again. This is mostly for legacy parts and assemblies which are not modeled correct according to the coordinate system of the machine.
The following sample code does not work, is this by design or is there an error in the code?
Public Sub RotateFirstView() Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument Dim oDrawView As DrawingView Set oDrawView = oDrawDoc.Sheets(1).DrawingViews(1) Dim oCamera As Camera Set oCamera = oDrawView.Camera Debug.Print oCamera.ViewOrientationType = kFrontViewOrientation oCamera.ViewOrientationType = kIsoBottomLeftViewOrientation oCamera.ApplyEnd Sub
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
View 4 Replies
View Related
Dec 24, 2013
I am trying to align two views horizontally with I logic, (view 1) and (view 2) but I am not sure what the syntax needs to look like.
I know that I need to import the Drawing view Alignment Enumeration, but other than that I don't know what to do, can some one post an example of how to align views with I-logic.
View 2 Replies
View Related
Jul 31, 2012
I have some models which are based on skeleton modeling and where the actual parts are modeled at the position where they are in the assembly. When the skeleton part is changed the parts will update and their orientation related to the origin planes can change. This is where the problem lies, on the drawings of these parts the views are all skewed after an update.
Is it somehow possible to tell Inventor that all views on a a drawing should stay alligned to a workplane? Because it are all parts and no assemblies I cannot use posreps (and I don't want to use dummy assemblies). I also tried setting a specific edge to be horizontal with the rotate command in the drawing. This works for the base view, but all projected views will still be skewed after an update.
View 2 Replies
View Related
May 21, 2013
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies
View Related
Aug 9, 2011
For Inventor 2012? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 9 Replies
View Related
Aug 1, 2012
Is there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
View 1 Replies
View Related
Nov 5, 2013
I have two problems with a IDW drawing.
Most of my views have been crosed over by a red line in the Model browser window (se attachment) What does this red line meen?
Also, all the views with the red line have been set to Raster View Only. I can untick it without problems, but when I click OK and reopen the dialog the checkmark is back on.
How come inventor turns this mark on by itself?
Using Inventor 2014 64-bit
View 9 Replies
View Related
Apr 15, 2013
I have a drawing view with many recurring instances of the same part. I want to include the "XY Plane of each of these occurrences using the API. My code appears to be correct but the projected planes just won't show up. I get an error when I try to include the plane that is not normal the the view so I know it is doing something.
View 1 Replies
View Related
Oct 7, 2011
Is there a way (IV2012) to have the drawing view default to 1:1 when inserting a detail into the sheet? Now it tries to select a scale based on who knows what.
View 8 Replies
View Related
Oct 28, 2013
Is there any way to have Tangent Edges to show within all view's created on my idw automatically within the my template file or do I have to remember to double click on each of my created views per page, select display options and make sure Tangent Edges are checked on.
*See Computer Mouse is Attached Photo
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
View 6 Replies
View Related
Oct 13, 2013
If you've had to use different design view representation of the same PART on a drawing in multiple Views at the same time, you already know that whenever you suppress completly a feature, the representation loose the condition stated in the model view and if the suppressed feature is reactivated, it then appear in all view. You have to right-click on the view and select "Apply design View" to reset it, or re-select the design view representation in "Edit view".
Recently I faced a case where i had to build a iLogic multi-body part representing a crate made of either sheet or bar, with a removable top and variable solid for top, sidewall and base, driven trought a in-drawing form! Reason being the customer wanted a easy, useable model for the shipping clerk to generate a custom crate drawing for the crate contractor, therefore freeing precious time for the drafting departement. Usually I would have used occurence visibillity from a assembly, but the document management part of the deal, was too much for the computer illiterate user... So, off i went creating a multi-body part, only to face the aforemention problem with view changing representation due to complete solid suppression.
So here's How-to Set representation view for part in drawing:
The trick is to set every view to it's representation by using the edit window interface code.
The iLogic line to set a View to a specific Design View Representation:
ActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()
I use this code in "IF" statement. You must repete the code for each view, removing the "Raster" line force a raster only reaction on the view, and the update must be placed after each view, otherwise it only update the last one.
Example:
If TYPE_COUVERCLE = "AUCUN" Then
ActiveSheet.View("2").View.Suppressed = TrueActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("3").View.SetDesignViewRepresentation("View2", False)ActiveSheet.View("3").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("4").View.SetDesignViewRepresentation("View1", False)ActiveSheet.View("4").View.IsRasterView = FalseThisApplication.ActiveView.Update()
Else If TYPE_COUVERCLE = "CONTREPLAQUÉ" Then
[Code]...
I'm telling the model that the disapearing element "TYPE_COUVERCLE" is driving the representation, only when it change does it fix the view, regenerating or changing the Design View Representation (the TYPE_SIDE and TYPE_BOTTOM are always active or always suppressed in their respectives views, therefore not influencing their respective appearance in other view). If you had multiple dissapearing solid or feature you would have to build a similar code for every one of them...
View 1 Replies
View Related
