AutoCad :: Blocks Not Shown On Multi View
Dec 14, 2013I have a drawing done by a colleague. The problem is the blocks not shown in multi view.... I checked the layers and isolation but i cant find the solution.
View 4 Replies
ADVERTISEMENT
AutoCAD Architecture :: Multi-View Blocks Rendering Through Viewport?
Dec 18, 2013When I pick rendered for my shadeplot on a viewport, none of the materials applied to multi-view blocks show up. Is this common or is there a fix?
View 3 Replies View RelatedAutoCAD Architecture :: Room Tags (Multi-View Blocks)
Feb 24, 2011I have a Room Tag (multi-view block) that was created in a previous release of AutoCAD Architecture that is not coming in at the correct scale in AutoCAD Architecture 2011. When we used to insert this block into an 1/8"=1'-0" drawing, it came in at a scale of 12.0,12.0,12.0. Now when we insert it into a 1/8"=1'-0" drawing, it comes in at 9.0,9.0,9.0. So, at 1/4"=1'-0" it comes in at 4.5,4.5,4.5; when it should be 6.0,6.0,6.0. I have many custom blocks that we have created for door tags, section refs, etc. and would just like to know what scale factor needs to be adjusted to fix this small issue.
View 2 Replies View RelatedAutoCAD Civil 3D :: Multi View Blocks Displaying Incorrectly In Object Viewer And Paperspace
Apr 30, 2013I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
AutoCAD Inventor :: Perspex Not Shown As Transparent In Drawing View
Apr 18, 2013We are having a little trouble with a .dwg we need to create. (we create all are drawings that would be .idw as .dwg so users of light etc can view and mark up the files.)
The part has a Perspex (to represent glass) front with some framework behind the Perspex. We have created a base view of it in a drawing and can see through the Perspex when the view is in render mode, but if we switch to hidden line removed (as our drawing standards dictate) all the detail behind the Perspex disappears.
Is there a way to make the Perspex part transparent when the view is in Hidden Line Removed mode.
IV12SP2 Win7 64 16gb
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
AutoCAD 2013 :: Multi Select Blocks Contained Within Array
Nov 30, 2012Looking for a method of selecting multiple blocks that have been arrayed within a drawing. I have tired with filter and qselect however there is no way to filter out blocks by name contained within an aray. Would be great if there was a .lsp routine or arx file that could deal with this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: Rectangular Junction Structure With Off Center Alignment Shown In Profile View
Jan 29, 2013Is it possible for a civil 3d structure to be displayed correctly in profile view when the alignment does not pass through the insertion point of the structure. See the attached screen capture.
The rectangular structure is a storage tank and there will be a pipe coming in on one end and the exit pipe will be on the adjacent side at the far end, just as the alignment shows - but the structure doesn't show correctly, or now how I expected.
AutoCAD VB :: Delete Blocks With Specific Names In Multi Layout Drawing
Apr 25, 2011In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing. There may be multiple blocks with the same name.
This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...
Dim E1 As Object
Dim ATS As Variant
Dim EA As AcadAttributeReference
Dim objLayouts As AcadLayouts
Dim LayerNextNo As Integer
Set objLayouts = ThisDrawing.Layouts
LayerNextNo = ThisDrawing.ActiveLayout.TabOrder
[code]....
AutoCAD Dynamic Blocks :: Displaying Attribute Info In Multi-leader?
Sep 16, 2013is there an way to display attribute data using a multi-leader inside a single dynamic block.
To elaborate, I'm trying to create a borehole dynamic block that I can enter the ground level and end of borehole level as attributes, and have them show up in a multi-leader. The reason for the multi-leader is that I can add a background mask to it and it automatically adjusts the length of the outline obox around it.
I just want to insert the borehole block from a tool palette, enter a couple of attributes, stretch the bottom down to whatever level, and I'm done.
I've been playing with it all weekend trying to get fields to show the attributes and I can get it to work if I use another block for the levels (multi-leaders), but even then I have to into the fields an mess with them. It's go to be east so my CAD guys can do it without slowing down, otherwise they may as well carry writing everything out long-hand as they do now.
I'm using Civil 3D 2012, if that matters.
AutoCAD 2013 :: Batch Erase Same Blocks And Strings In Multi-drawings
Oct 8, 2013I have 200+ page drawings and need to open each dwg to erase same block and text strings. Any way to batch erase same blocks and strings in multi-pages?
View 7 Replies View RelatedAutoCAD Dynamic Blocks :: How To Disable The Dialog Box Shown When Open A Dynamic Block
Nov 7, 2011I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
AutoCAD Architecture :: Tag A Multi-view Block?
Feb 3, 2011is it possible to tag a multi-view block?
i.e. I have a outlet recept thats a MVB. I have it linked to the space with has the circuit number for the electrical panel. Is it possible to tag a MVB similar to tagging a window?
spaceobjects property set:
spaceobjects:circ_number (manual property set)
also has a location set
recept property set (connected to the MVB of the receptacle):
formula pulls the circ number from the spaceobjects
AutoCAD Civil 3D :: Multi View Block Of Hydrant
Apr 25, 2012with the new civil 3d 2013 i would like to show my hydrants in profile and section as well as drive thru's .... same with more parts then what they give us "out of the box"...multi view block of a hydrant?
View 5 Replies View RelatedPhotoshop Elements :: Pictures With GPS-data Will Not Be Shown In List-view (PSE11 / Windows 7)
Sep 14, 2013A lot of pictures of my collection do have GPS-data in EXIF-header. Sometimes they are shown on the world-map, sometimes not. In list-view they are never shown. The list-view knows only locations, which are matched with PSE.
The EXIF-input was made by two different tools (Holux GPS Software and Geosetter 3.4.16).
How can I get the list-view for the saved files without using PSE adding location?
Lightroom :: Capture Date / Time As Shown In Grid View Bottom Label?
Apr 29, 2012I have a number of older pictures in my library that don't have Capture Date in the metadata. Windows Explorer Propoerties typically shows info like this, for these files:
Created: Tues, Mar 11, 2009 <time>
Modified: Wed, June 12, 2002 <time>
Accessed: Thu, Sept, 13, 2006 < time>
In my experience, PSE assumes the "Modified" date as capture date with files like this. (A good assumption, for these pics Im looking at now.)
From what I can tell, LR also uses the "modified" date when sorting these pictures' thumbnails. And when I do Metadata > Edit Capture Date, it shows the Modified date as the Original (all good so far).
BUT, in Grid View of the Library module, I have View Options set to show capture date in the Bottom Labal, and here it shows the "Created" date. (So it like 2009 pictures are getting placed next to 2002 pics, in what's supposed to be a chronoligical sort.)
AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View
Nov 28, 2012Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
Revit :: Appearance Of Multi-Category Schedule In Layout View
Dec 19, 2011I would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
Revit :: Appearance Of Multi-Category Schedule In Layout View?
Dec 19, 2011I would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
Revit :: 2013 - Multi-segment Grid Markers And Dependent View
Jul 16, 2012I've placed the Multi-Segmented Grids in my large project that requires (6) dependent views per floor plan. In each of the dependent views, I'm trying to get the grid markers to show at the ends that ~I~ want them to show, but I'm not getting the checkbox.
Is this by design? Or is it a bug?
AutoCad :: View Bound XREF's That Are Now Blocks
Jul 30, 2013I'm a document controller that is trying to ID the situation with 2600 drawings. Some files are so large - 250,000kb, they won't open. They have bound xref's in them. We want to ask the contractor to unbind them and attach them as normal xref's. I need to view if a drawing has bound xref's. I just want to see them as BLOCKS which I now understand they are. How do I do view the blocks that were once xref's?
View 9 Replies View RelatedAutoCAD 2010 :: Plan View Furniture Blocks?
Mar 12, 2012Are there places where I can find plan view furniture pieces for AutoCAD 2012? I have found some, but most are commercial. I'm looking for residential furniture like sofas, loveseats, and chairs in victorian era styles.
View 1 Replies View RelatedAutoCad :: How To Access Library Of Blocks In Plan And Elevation View
Aug 23, 2013I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
View 9 Replies View RelatedGIMP :: Change From Multi-window To Single Window View
Apr 17, 2013How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies View RelatedPaint.NET :: Unrelated Annoying Pop-up Blocks View
May 20, 2011What's with all the annoying popups on this forum page. Every time my cursor hovers over a link, some unrelated annoying pop-up blocks the view.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select All Blocks Like Selected Blocks With Window?
Feb 28, 2011(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
AutoCAD Dynamic Blocks :: Zoom All & Extents With Blocks Containing Fields On Layout Tabs
Aug 22, 2013We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
AutoCAD Dynamic Blocks :: Finding Number Of Times Specific Blocks Used In A Drawing?
Aug 8, 2013How to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?
Jul 15, 2011How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
AutoCad 2D :: Replace Dynamic Blocks With Normal Blocks Based On Parameters
Aug 2, 2012We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
AutoCAD Dynamic Blocks :: Add Exact Same Objects And Visibility State To Blocks
Jan 7, 2014I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Convert The Blocks In Dwg File To Lines That Are Centered On Those Blocks?
Jan 24, 2012I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View Related
