AutoCAD Inventor :: Drawing View In Raster State
Sep 3, 2013Having this dialogue box pop up every time i print. Not sure what a raster view is and how I should be turning it on /off.
View 6 Replies
ADVERTISEMENT
AutoCAD 2013 :: View Drawing In Prior State?
Jan 10, 2014Is there anyway to look at a drawing in a prior state? Say I wanted to see what it looked like 2 months ago. And then again just one month ago. I found a great app called HISTORY that will show each line being drawn one by one, but I can't seem to find anything else that is even close to what I would need.
View 4 Replies View RelatedAutoCAD Inventor :: Add Design State Of Parts In Assembly Drawing
Aug 8, 2013I have an assembly drawing that i would like to have in the partlist a column with the design state of each part of the assembly, how can i do that, since that property is not in the partlist column chooser.
View 3 Replies View RelatedAutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: View Label In Base View / Drawing?
Nov 25, 2008Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedAutoCad :: Layer State Overrides To View Ports Using Filter
Jan 18, 2013When I save layer states overrides for a certain view port and mane it e.g. "K", in layer state manager current layer state is shown as "K", but when I change layout and come back to this one, in layer state manager current layer state is shown as *UNSAVED* again!!!
This results in a great problem. If I update layer state "K" it does not update all view ports that should have layer state "K" automatically so I have to go trough all of them again and apply "K" again and again after any change to "K" is made.
Link to other thread: Apply Layer State Overrides to view ports using filter which, if answered could bypass the problem.
AutoCAD Inventor :: Pin View In Drawing
May 9, 2013I'm working on a Isometric drawing and im trying to dimension the view. I keep the original view there and cut another of the same view and place that cut view over the original, so I have something to snap to while dimensioning.
Every time i go to place the cut view over the original and i always grab the wrong view and move it and I am wondering if there is a way to pin the original view in place permanently?
AutoCAD Map 3D :: Insert A Raster File Into A Drawing
May 17, 2011I am having an issue with Autodesk Map 3D 201164 bit and Autocad Raster Design 64 bit. Everytime we insert a raster file into a drawing.The laptop freezes. I really thought it was because we were using XP 32 bit. We got an error message that we did not have enough RAM. After doing some research on this forum, I updated to Windows 7.
View 4 Replies View RelatedAutoCad :: Bind Raster Image To Drawing?
Jun 22, 2011 Is there anyway to bind a raster image to a drawing?
Everytime I bind/insert my title block the images dont bind in and also the file paths get deleted. Asked most of the drafters I know and everyone says it cant be done, which is what i think.
Normally I would use a CAD version of the Logos (for the client/architect,etc.) but sometime there isnt one available so have to use raster images.
AutoCad :: Deleting All Raster Images In Drawing At Once?
Apr 20, 2011I imported the .dwg file from ArchiCAD 12 to my AutoCAD 2008.
The problem is that, there are some dots (Autocad recognizes it as "raster image") all over the drawing. And I need to delete them manually each one of them.
Is there way I could do this automatically? Is there a way to select all the "raster images" at once, and then delete them?
AutoCAD Inventor :: Make A View In A Drawing?
Sep 6, 2013Is there a way so that when I make a view in a drawing,
it shows up by default with all it's real lines, instead of having to select the options all the time...
AutoCAD Inventor :: Copy View From One Drawing To Another?
Jan 31, 2012For inventor drawing, is that possible to copy a view from one drawing to another different drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Drawing - View Between Two Planes?
Sep 11, 2013i have assembly and i want make drawing of part of it. Part of assembly i want to show/draw is between two parallel planes. How can i do this?
I'm using inventor 2010.
AutoCAD Inventor :: Drawing View Won't Update?
Jan 3, 2012I've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies View RelatedAutoCAD Inventor :: Sectioned View Rep And Drawing
May 31, 2011I have a 3/4 sectioned view rep (Locked) in an assembly. On a drawing, When I select the correct view rep,
- I don't get the save view orientation ( though It show/hide the correct parts). I was expecting this because I had locked in 3D
- I don't get to see the 3/4 section.
AutoCAD 2010 :: Import Raster Image Into A Drawing
May 22, 2012I have imported a raster image into a drawing and it has a border around the exterior of the picture. When I plot it the exterior line shows up as a line and I want it to not show up on the plot. Is this possible?
View 2 Replies View RelatedAutoCAD Inventor :: Rotate Drawing View Using ILogic
Jul 11, 2013Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedAutoCAD Inventor :: Drawing View Associative Selection
May 24, 2012In the continuing persuit to learn Inventor, of this selection in the drawing view editor?I have noticed one thing. When it is checked it turns off the visibility of parts within an assembly view.
View 9 Replies View RelatedAutoCAD Inventor :: Orient Drawing View By Surface
Oct 18, 2011I have an assembly that is derived from a solid body part. The assembly can rotate in the part hence the .iam that was created using Make Components also rotates. The trouble is I need to make a template drawing showing the assembly in the same position all the time.
Is there a way to make a base view always look at a surface and follow that surface so that the view on the drawing always looks the same?
For example: If I had a dice and I create a base view of the two dots side of the die. If I roll the die I still want to see in the base view the two dots side of the die in the same orientation.
AutoCAD Inventor :: Drawing View Component Visibility
Nov 8, 2011I am using this code to turn visibility of components off in IDw file, what I need top turn visibility of a component of in a subassembly.
'oDrawingDocument = ThisApplication.ActiveDocument
'Get the first view
'Dim oView As Inventor.DrawingView
'oView = oDrawingDocument.ActiveSheet.DrawingViews.Item(2)
[Code] .........
AutoCAD Inventor :: Change Camera For Drawing View?
Aug 24, 2011We are sometimes faced with the problem that we would like change the coordinate system of the model and have the drawing update it with the new orientation of the part without the need to place every annotation again. This is mostly for legacy parts and assemblies which are not modeled correct according to the coordinate system of the machine.
The following sample code does not work, is this by design or is there an error in the code?
Public Sub RotateFirstView() Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument Dim oDrawView As DrawingView Set oDrawView = oDrawDoc.Sheets(1).DrawingViews(1) Dim oCamera As Camera Set oCamera = oDrawView.Camera Debug.Print oCamera.ViewOrientationType = kFrontViewOrientation oCamera.ViewOrientationType = kIsoBottomLeftViewOrientation oCamera.ApplyEnd Sub
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
AutoCAD Inventor :: Syntax For Drawing View Alignment
Dec 24, 2013I am trying to align two views horizontally with I logic, (view 1) and (view 2) but I am not sure what the syntax needs to look like.
I know that I need to import the Drawing view Alignment Enumeration, but other than that I don't know what to do, can some one post an example of how to align views with I-logic.
AutoCAD Inventor :: Keep Drawing View Aligned To Workplane?
Jul 31, 2012I have some models which are based on skeleton modeling and where the actual parts are modeled at the position where they are in the assembly. When the skeleton part is changed the parts will update and their orientation related to the origin planes can change. This is where the problem lies, on the drawings of these parts the views are all skewed after an update.
Is it somehow possible to tell Inventor that all views on a a drawing should stay alligned to a workplane? Because it are all parts and no assemblies I cannot use posreps (and I don't want to use dummy assemblies). I also tried setting a specific edge to be horizontal with the rotate command in the drawing. This works for the base view, but all projected views will still be skewed after an update.
AutoCAD Inventor :: Area Of Part From Drawing View
May 21, 2013Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies View RelatedAutoCAD Inventor :: Green Brackets Around Drawing View?
Aug 9, 2011For Inventor 2012? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
AutoCAD Inventor :: Window Detail View In A Drawing
Aug 1, 2012Is there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
AutoCAD Inventor :: Drawing Files View Icon?
Nov 5, 2013I have two problems with a IDW drawing.
Most of my views have been crosed over by a red line in the Model browser window (se attachment) What does this red line meen?
Also, all the views with the red line have been set to Raster View Only. I can untick it without problems, but when I click OK and reopen the dialog the checkmark is back on.
How come inventor turns this mark on by itself?
Using Inventor 2014 64-bit
AutoCAD Inventor :: How To Include Plane In A Drawing View
Apr 15, 2013I have a drawing view with many recurring instances of the same part. I want to include the "XY Plane of each of these occurrences using the API. My code appears to be correct but the projected planes just won't show up. I get an error when I try to include the plane that is not normal the the view so I know it is doing something.
View 1 Replies View RelatedAutoCAD Inventor :: Drawing View Scale Default
Oct 7, 2011Is there a way (IV2012) to have the drawing view default to 1:1 when inserting a detail into the sheet? Now it tries to select a scale based on who knows what.
View 8 Replies View RelatedAutoCAD Inventor :: Drawing View With Or Without Tangent Edges
Oct 28, 2013Is there any way to have Tangent Edges to show within all view's created on my idw automatically within the my template file or do I have to remember to double click on each of my created views per page, select display options and make sure Tangent Edges are checked on.
*See Computer Mouse is Attached Photo
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800