I imported the .dwg file from ArchiCAD 12 to my AutoCAD 2008.
The problem is that, there are some dots (Autocad recognizes it as "raster image") all over the drawing. And I need to delete them manually each one of them.
Is there way I could do this automatically? Is there a way to select all the "raster images" at once, and then delete them?
Where can i get satellite images in .j2w .jp2 format to import to Autocad Map 3D, can i get this type of formats from google earth or other "free" sources?
View 3 Replies View RelatedI am attempting to bind a logo in my title block and I don't see where I have the option to bind an image.
View 5 Replies View RelatedI normally am a Civil 3D person. Learning something new as the company I work for has been tasked with creating some GIS maps for a client. Still have only a couple of months experience with Map 3D. The current task at hand is creating a map of our client's district boundary to replace an old exhibit hanging in client's office. I used mapiinsert to insert 64 MrSID raster images, then data connected some SDF file for the boundary, major thoroughfares, and tributaries. The overall aerial imagery, after clipping, is about 11 miles by 17.25 miles. I am planning to plot this on a 48" x 76" sheet of paper at a 1200 scale.
The problem is that I get about 1/8" of an aerial image and 75-3/4" of blank paper when I try to plot. I have tried to reduce the raster image quality and bumped up the Rasterpercent and Rasterthreshold system variables to their maximum settings with no improvement. Images show when I do a preview, but do not plot out. I also tried creating a PDF but I get the same result with a thin strip of aerial when I do that. I use Bluebeam for PDF.
Map 3D 2011
Computer:
Intel Core i7 processor
8 GB RAM
Windows 7 Professional 64-bit OS
Plotter:
HP Designjet T1100ps with optimized driver
Yes, I know the HP is only a 44" plotter, but I am plotting to fit a 36" roll so that we can view a check plot before we forward the file to our reprographics company for full size plots. I have also tried different settings on the plotter but nothing I have tried has had any impact.
I just loaded AutoCAD 2013.... when I printed out a drawing which included a picture .bmp file format, only the picture comes out completely black. It's looks like the raster images printed were reversed. It appear as a negative image.
View 1 Replies View RelatedHeard complaints about how XREF's with raster images take forever to load and unload? Any time you select the XREF in the Xref Manager the images process, whether they are turned on or off. When did this behavior start?
View 7 Replies View RelatedHow many raster images can I add to an AutoCAD drawing?
Is there a limit? If so what is this limit and how can I change it?
We're having problems with exporting/printing raster images, mostly earial-images.
This raster images aren't showing up, but the problem happens at random and on different pc's/platforms.
We are running AutoCAD 2011 LT on windows XP and windows 7 x64 platforms.
My boss has been having problems with some drawings containing Raster Images, they display on every workstation besides his.
The saved path is correct but the images all list 'Unreferenced' as their status, I've tried reloading them and even detaching before reinserting them but to no avail. He is running Autocad 2013 (SP2 installed).
Also, he's had this problem for awhile now but it's happening on his brand new pc too, which suggests a possible network problem? He's on the same wireless network as half of our office but he's the only one experiencing this issue.
My Raster images TIFF are not printing although they show up in the print preview. They are attached as exernal referneces, loaded and the layers are set to plot. I would like them to plot. Autocad Map 2011
View 3 Replies View RelatedIn the old days (15years ago) we scanned a lot of files to DXB, and simply imported the image into the .DWG as small objects. (I believe they were treated as polyline segments). The lines from the original scan became a series of small polyline segments (not joined) but the scanned image plotted as good as the original, and even better, the objects could be erased and a "hybrid" drawing created without xrefs or "embedded" raster files. You could manipulate the scanned objects with normal autocad commands, and they existed on Layer 7.
Now, I am forced to Import a TIFF and "embed" the object (if I want it to be a permanent part of the drawing), and edit it with seperate programs like Raster Design.
QUESTION: How to convert a "embedded raster image" into a DXB image?
The scanner used to do the work for me and save the image as DXB. It was not a "vectorization program", but the raster lines became small (not joined) polyline segments in the process.
I don't want to "vectorize" with a seperate program, because then it just "traces" with a zero-width polyline.
The old scanner used to save to DXB, now I don't even see that as an option.
Any words of wisdom about creating a "scan" that can become "objects" (even small dots) INSIDE the DWG file, instead of a "Raster Image" that has to be xref'ed or "embedded", and will not even plot to a DXB or HPGL format?
I have mostly TIFF files that I would like to "convert" to DXB, and not have to re-scan them. I hate that the Raster file is treated as a seperate xref or "embedded" Raster Image.
I KNOW we used to scan directly to DXB and bring in the objects with the DXBIN command!
We frequently create PDF files using the DWGtoPDF.pc3 . We have a lot of drawings with a raster background image. In version 2010 I could create a PDF and the raster image would show up. We recently upgraded to Map 3D 2012 and although the raster shows up in the preview, it does NOT get plotted to the PDF.
View 9 Replies View RelatedI am having an issue with Autodesk Map 3D 201164 bit and Autocad Raster Design 64 bit. Everytime we insert a raster file into a drawing.The laptop freezes. I really thought it was because we were using XP 32 bit. We got an error message that we did not have enough RAM. After doing some research on this forum, I updated to Windows 7.
View 4 Replies View Related Is there anyway to bind a raster image to a drawing?
Everytime I bind/insert my title block the images dont bind in and also the file paths get deleted. Asked most of the drafters I know and everyone says it cant be done, which is what i think.
Normally I would use a CAD version of the Logos (for the client/architect,etc.) but sometime there isnt one available so have to use raster images.
In the old days (15years ago) we scanned a lot of files to DXB, and simply imported the image into the .DWG as small objects. (I believe they were treated as polyline segments).
Now, I am forced to Import a TIFF and "embed" the object (if I want it to be a permanent part of the drawing), and edit it with separate programs like Raster Design. How to convert a "embedded raster image" into a DXB image?
The scanner used to do the work for me and save the image as DXB.It was not a "vectorization program", but the raster lines became small (not joined) polyline segments in the process.I don't want to "vectorize" with a separate program, because then it just "traces" with a zero-width polyline.The old scanner used to save to DXB, now I don't even see that as an option.
Any words of wisdom about creating a "scan" that can become "objects" (even small dots) INSIDE the DWG file, instead of a "Raster Image" that has to be xref'ed or "embedded", and will not even plot to a DXB or HPGL format?
I have problem with multiple raster images.I can not marge them.You can see problem in picture.
View 1 Replies View RelatedHere's the Code I have so far:
I want to iterate through the Image Dictionary and Connect into the Raster ImageDef Properties.
I want to be able to modify and fix missing Raster Images.
How to get this code sorted out.
For Each myObjID As ObjectId In myModelSpace
Dim myEnt As Entity = myObjID.GetObject(OpenMode.ForRead)
If TypeOf myEnt Is Image Then Dim myRasterImg As RasterImage
Dim myRasterImgDef As RasterImageDef 'Open The Dictionary
Dim ImgDict As ObjectId = RasterImageDef.GetImageDictionary(DatabaseIn)
For Each dictEntry In ImgDict NextEnd If
I am facing the following problem in Autocad 2012:
I have set all the drawings I want to print in the Sheet Set Manager and I publish everything to plotter for unattended plotting. However, when publishing the same drawings to PDF using the SSM, all raster images do no print. If I open each drawing and plot the same layout on its own, everything prints just fine. So I think there is something wrong when publishing through the SSM.
The funny thing is that before using Autocad 2012 I was using version 2010 and everything worked as expected, the raster images were printed no matter where I was printing from.
I have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies View RelatedHaving this dialogue box pop up every time i print. Not sure what a raster view is and how I should be turning it on /off.
View 6 Replies View RelatedI have imported a raster image into a drawing and it has a border around the exterior of the picture. When I plot it the exterior line shows up as a line and I want it to not show up on the plot. Is this possible?
View 2 Replies View RelatedI am working on a project that requires a number of raster images to be compiled in a base file and then x-ref'ed into titleblock sheets. The base file is not giving me any problems but the files it is x-ref'ed into keep giving me fatal errors and shutting down AutoCAD. I am working in 2012 LT. I was able to find a HotFix for this problem for 2008 but have not been able to find a fix for my version.
View 2 Replies View RelatedWhen I Print from AutoCAD 2000i (Windows XP, 2GHz, 2GB Ram) to a Canon IP6000 and an HP9800
I get evenly spaced white stripes in raster images (inserted via insert or ole) Vector lines and text appear just fine on top of the image. I've tried changing the spooler location and image quality to no avail. I have attached a scan of the output I am getting.
We have a raster drawing that we're trying to vectorize using Raster Tools within Autodesk Infrastructure Design Suite (Civil 3d) 2014. However the process is slow going having to convert each line within the raster drawing manually. Is there a way that Raster Tools can automatically vectorize all lines within the drawing instead of picking each and every line?
View 4 Replies View RelatedCan I attach a raster image so it is part of a drawing and travels with it. If so, how do I do it? I realize it would increase file size. I often add reference .jps to my drawings for the shop. I'd like to be sure that when the file is moved to a different folder or archived it includes the image.
View 9 Replies View RelatedI have a set of four images I am referencing into a drawing through the data connect feature found in Planning and analysis that overlap. I am running Civil 3D 2013. I would like to be able to clip the images as well as turn off the transparency but I can't seem to figure out how. If you select the images cadd thinks it is an image referenced outside of Data connect, but the clipping tool doesn't work, and it doesn't even matter if you de-select print transparency in the page setup, it still prints transparent. Is there another set of commands or tools that I am not aware of that allows you to edit an image brought in through the data connect?
View 2 Replies View RelatedWorking in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
How to delete the layer "AR-FURN-E" on the attached drawing? Also, there is a circle to the right of the building where if you zoom out, a small dot will appear inside, what is this?
View 2 Replies View RelatedI want to rename the RasterImage Files to Match the Drawing Naming Convention Plus a Suffix.
In this case _A, _B, _C etc.
And update that in the Drawing.
Public Shared Sub RenameRasterImagesAndReattachToDrawing(ByVal FilePath As String) Dim sNewName As String = "" Dim iImg As Integer = 0 Dim Suffix As String = "A" Dim myDwgIO As New IO.FileInfo(FilePath) 'Get FileName from Full FilePath '<<<1. Locate Raster Images 'Autocad Database Adapter 'Read Autocad File Silently without opening file on Screen Dim myDoc As
[Code].....
One of the drafters I work with has been having an intermittent problem with Inventor 14 deleting dimensions and notes when he prints a .idw to a .pdf. The problem first popped up when we transitioned to 14 from 12. It only happens once out of every 2 dozen or so prints and is usually caught on the redlines, but it has been overlooked once already requiring the part to be remachined at cost to our employer. No one else in our office has had the problem and it continued to happen after a reinstall; which leads me to think it's some hardware issue.
Included is a screenshot of his system information. We're running Synergis Adept file management software, that may be pertinent as well.
I use a raster image (JPG) on my title block for the Company Logo. This all worked fine in Revit 2009. Since I installed 2010 the logo no longer prints. I have tried other images and even converted it to a TIF.
It does not seem to be linked to any one printer. I have tried plotting on a HP Plotter, HP Laser Jet, Sharp Printer/ Copier, and even to a PDF. All have the same result. No Logo.