I am trying to align two views horizontally with I logic, (view 1) and (view 2) but I am not sure what the syntax needs to look like.
I know that I need to import the Drawing view Alignment Enumeration, but other than that I don't know what to do, can some one post an example of how to align views with I-logic.
I'm trying to edit some existing alignments. When I create new entities, they do not show up in the alignment grid view. Why is this?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Launching alignment grid view/alignment entities,
I’m wondering if there is a way to launch alignment grid view/alignment entities (attached) without the need to first launching “alignment”? This dialogue box is quite essential in editing the values of radius, degree of curvature and deflection angle for the selected curve.
I'm noticing that on some of my drawings that the view labels are not aligning correctly to the respective views. I have view labels set by the drawing styles to appear at the bottom center of the view by default.
The problem occurs when I go to move the view to a different area on the drawing. The view label ends up on an obscure part for the drawing. When I realign them manually, save, close and reload the drawing, the view labels still appear on obscure parts of the drawing and need to be realigned again. Only some views are doing this and I'm not sure what is causing this. It happens with (but not limited to) base, detail and section views.
FYI, I'm using Inventor Pro 2012 SP1 build 190 64-bit. I'm working from Inventor DWG (not IDW) files.
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAfter upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedI was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
I used to have an A1 printed sheet of all of the ilogic commands, functions, syntax or whatever you call them. It was all nicely grouped and colour coded etc
Unfortunately I have since moved jobs and lost this and neither me or google can find this again, any copy or link? it may have been a pdf or excel format.
I want a ilogic rule syntax for following process:
I have one excel sheet it consists around 5 sheets for Plate, Flats, Rounds, etc. When i am run the rule then it will ask and do the following:
Ask the thickness value.It will search thickness value in “D:LINUS KOTTEstock numbers.xlsx” in sheet 1If thickness value found then fill the stock number in iproperty(project tab-stock number)
Here i am using different rules for plate, flat, round, etc.,
"The filename, directory name or volume label syntax is incorrect. The database in K;lah/blahlah.widget.ipt* could not be saved".It's nothing to do with an improper name; even saving as the default 'Part 3' doesn't work.
At the moment I'm limping by using Save Copy As. Neither Save not Save As work at all.
I'm working on a Isometric drawing and im trying to dimension the view. I keep the original view there and cut another of the same view and place that cut view over the original, so I have something to snap to while dimensioning.
Every time i go to place the cut view over the original and i always grab the wrong view and move it and I am wondering if there is a way to pin the original view in place permanently?
Is there a way so that when I make a view in a drawing,
it shows up by default with all it's real lines, instead of having to select the options all the time...
For inventor drawing, is that possible to copy a view from one drawing to another different drawing?
View 2 Replies View Relatedi have assembly and i want make drawing of part of it. Part of assembly i want to show/draw is between two parallel planes. How can i do this?
I'm using inventor 2010.
I've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies View RelatedI have a 3/4 sectioned view rep (Locked) in an assembly. On a drawing, When I select the correct view rep,
- I don't get the save view orientation ( though It show/hide the correct parts). I was expecting this because I had locked in 3D
- I don't get to see the 3/4 section.
Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedIn the continuing persuit to learn Inventor, of this selection in the drawing view editor?I have noticed one thing. When it is checked it turns off the visibility of parts within an assembly view.
View 9 Replies View RelatedI have an assembly that is derived from a solid body part. The assembly can rotate in the part hence the .iam that was created using Make Components also rotates. The trouble is I need to make a template drawing showing the assembly in the same position all the time.
Is there a way to make a base view always look at a surface and follow that surface so that the view on the drawing always looks the same?
For example: If I had a dice and I create a base view of the two dots side of the die. If I roll the die I still want to see in the base view the two dots side of the die in the same orientation.
Having this dialogue box pop up every time i print. Not sure what a raster view is and how I should be turning it on /off.
View 6 Replies View RelatedI am using this code to turn visibility of components off in IDw file, what I need top turn visibility of a component of in a subassembly.
'oDrawingDocument = ThisApplication.ActiveDocument
'Get the first view
'Dim oView As Inventor.DrawingView
'oView = oDrawingDocument.ActiveSheet.DrawingViews.Item(2)
[Code] .........
We are sometimes faced with the problem that we would like change the coordinate system of the model and have the drawing update it with the new orientation of the part without the need to place every annotation again. This is mostly for legacy parts and assemblies which are not modeled correct according to the coordinate system of the machine.
The following sample code does not work, is this by design or is there an error in the code?
Public Sub RotateFirstView() Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument Dim oDrawView As DrawingView Set oDrawView = oDrawDoc.Sheets(1).DrawingViews(1) Dim oCamera As Camera Set oCamera = oDrawView.Camera Debug.Print oCamera.ViewOrientationType = kFrontViewOrientation oCamera.ViewOrientationType = kIsoBottomLeftViewOrientation oCamera.ApplyEnd Sub
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
I have some models which are based on skeleton modeling and where the actual parts are modeled at the position where they are in the assembly. When the skeleton part is changed the parts will update and their orientation related to the origin planes can change. This is where the problem lies, on the drawings of these parts the views are all skewed after an update.
Is it somehow possible to tell Inventor that all views on a a drawing should stay alligned to a workplane? Because it are all parts and no assemblies I cannot use posreps (and I don't want to use dummy assemblies). I also tried setting a specific edge to be horizontal with the rotate command in the drawing. This works for the base view, but all projected views will still be skewed after an update.
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies View RelatedFor Inventor 2012? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Is there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
I have two problems with a IDW drawing.
Most of my views have been crosed over by a red line in the Model browser window (se attachment) What does this red line meen?
Also, all the views with the red line have been set to Raster View Only. I can untick it without problems, but when I click OK and reopen the dialog the checkmark is back on.
How come inventor turns this mark on by itself?
Using Inventor 2014 64-bit
I have a drawing view with many recurring instances of the same part. I want to include the "XY Plane of each of these occurrences using the API. My code appears to be correct but the projected planes just won't show up. I get an error when I try to include the plane that is not normal the the view so I know it is doing something.
View 1 Replies View RelatedIs there a way (IV2012) to have the drawing view default to 1:1 when inserting a detail into the sheet? Now it tries to select a scale based on who knows what.
View 8 Replies View RelatedIs there any way to have Tangent Edges to show within all view's created on my idw automatically within the my template file or do I have to remember to double click on each of my created views per page, select display options and make sure Tangent Edges are checked on.
*See Computer Mouse is Attached Photo
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800