AutoCad :: How To Reload Titleblock To Each Layout
May 4, 2011
This is a 2 fold question.
I have a drawing with 18 viewports, each one has (should have) a titleblock but xref manager tells me it is not found. Firstly, why would it now not be attached? And secondly, why am I not simply able to re-reference it? I tried to UNLOAD and DETACH it but it wont do it as there are multiple inserts. So I tried to RELOAD and ATTACH but no joy. It simply gives me the path to the referenced file (which is correct by the way) So, how do I reload the titleblock to each layout?
View 9 Replies
ADVERTISEMENT
Mar 11, 2013
I'm writing a tool to change iproperties in the titleblock.
But now we start using two different types of titleblocks.
I need to check which titleblock is present in the current sheet/drawing.
I use this code to place a titleblock:
Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")
How do I check if "sample_titleblock" is already present?
Autodesk Inventor Product Design Suite 2013 SP1.1
View 1 Replies
View Related
Feb 4, 2013
I have 2 files and I'd like to copy a titleblock from a template drawing and use it to replace an existing titleblock on an in progress drawing. The titleblock on the in progress drawing has attributes, and I'd like to keep them when I put in the new titleblock. The attribute tag names between the 2 titleblocks are the same.
I do not know the exact names of the titleblocks, only that they contain the words "title block" somewhere in their name.
I've developed for Inventor for a while now, but I'm completely new to AutoCAD. How might I go about this?
I believe the basic steps would be something like this:
1. Identify which object to copy from template sheet.
2. Save that object to memory
3. Identify object to replace in existing drawing
4. Copy attributes and get position of existing titleblock
5. Delete existing titleblock
6. Insert new titleblock and copy in attributes
I've taken the Autocad tutorials, and I've searched for relevant posts on ThroughTheInterface. Is there someplace else to look which might give a more in-depth example of what I'm trying to accomplish?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 4 Replies
View Related
May 18, 2006
If there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?
View 3 Replies
View Related
Mar 8, 2011
My hospital has been bought out by another hospital. Is there an easy way to change my titleblock. I am using project navigator and I have changed my templates.
View 2 Replies
View Related
Dec 13, 2013
how come when I insert an image (BMP) into my drawing border and then create a PDF, the graphic looks choppy?
I am using AutoCAD 2010. I am opening the BMP up in Paint, then copying and pasting into drawing titleblock.
View 4 Replies
View Related
Sep 11, 2012
I have an Inventor license that doesn't include Autocad. We have some old Autocad drawings that I would like to write a program to extract the titleblock info which I believe is probably done with attributes. Not sure though.
is there any way for me to get to that info without having a seat of Autocad? In Inventor we can use apprentice to do similar things.
View 3 Replies
View Related
Feb 12, 2013
I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?
View 9 Replies
View Related
Oct 24, 2013
I need to insert a barcode into my drawing titleblock. I have the font loaded that I need, I just can't get it formatted so my barcode reader will read it. I am using the field "filename" to drive the text in the barcode. My issue is I need and asterisk as a prefix and a suffix to my file name so my barcode reader knows where to "start and stop". How can I format the field "filename" with an asterisk (*) as a prefix and suffix?
View 4 Replies
View Related
Apr 23, 2008
I could have a drawing open, open up the xref, make a change in it save and close. I would get a message in the bottom corner of the drawing saying ‘RELOAD XREF’S’ I would hit that and it would update the changes I made.
I do that same change I won’t get any message saying ‘RELOAD’ and even if I type in ‘xref’ and reload the it that way, it doesn’t update any changes I made. I have to actually detach and re-attach it to see the changes I made.
View 9 Replies
View Related
Mar 19, 2012
I just updated my company .LIN file and now I need to find the most efficient way to reload all the linetypes into our template and some drawings hopefully without having to delete or purge them out.
View 2 Replies
View Related
Mar 31, 2011
I think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies
View Related
May 15, 2012
I just installed AUTOCAD 2013 on my computer. Every morning when I start up, I have to reload by CUI file. My ribbons are rearranged, I have to arrange them back to how I had them. Why is this happening?
View 4 Replies
View Related
Sep 9, 2011
my xref reloading in acad v2011, it's not working-but the xref file is in the folder and in the right path as well.
View 9 Replies
View Related
Sep 10, 2013
I am working on a new project which is now at building control stage and am doing the following workflow:
View 5 Replies
View Related
Oct 24, 2012
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 3 Replies
View Related
Jan 10, 2013
Whenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.
View 2 Replies
View Related
Sep 10, 2013
I am trying to change the titleblock definition of a drawing when I run my custom ilogic code. Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:
Currently the textbox for the part number is configured as below:
And I'd like to change it to this:
The code I have to find the part number is as follows:
Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =
[Code]....
View 3 Replies
View Related
Aug 28, 2012
I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?
View 9 Replies
View Related
Jan 4, 2013
Working in AutoCAD 2013
Plotting from the Layout - Model is plotting fine, XREF Titleblock is plotting out too light, about 20% of what model plots.
XREFd on 0 layer (tried on different layer, result = no difference) all other aspects of plot are correct
XDWGFADECTL set at 1
LAYLOCKFADECTL set at 1
Print Preferences
- line and text (not photo)
- dpi 600
I found a work-around but it isn't realistic in the longterm, I inserted the Title block as a BLOCK and exploded it, and then the titleblock plotted fine with each of the different Title Block layers plotting correct to pen width.
View 3 Replies
View Related
May 28, 2012
I'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.
View 3 Replies
View Related
Jun 21, 2012
Having this problem with 2 lisp routines, i have autocad set up to load a certain profile. but every time I start autocad, i have to reload the 2 lisp routines thru appload.
View 2 Replies
View Related
Feb 13, 2013
I have an addin which displays a form, then when I click a button operations are launched. The form is no modal, so I display it, select objects, apply, select objects, apply,... then close the form with another button (form.close).
All functions, but only on the first opened file : I open the file, use the addin, close the form. I open another file, the addin is always loaded, but when I click on the icon to display the form nothing happens... I have to unload the addin and reload it.
View 2 Replies
View Related
Oct 4, 2011
I have a bunch of drawings for which I have to reload the linetypes (they have to be redefined, for example pneumatic line has a new definition but the drawing has an older one). Is there a way other than rename the old linetypes, then load the newer version, then iterate through all objects and change the linetype to the newer version?
View 2 Replies
View Related
Mar 22, 2013
My company recently upgraded to Autocad 2013 from 2008. I was using a custom dimension cui file for sizing dimensions according to scale. I have reloaded the file into 2013. However, I am having to reload the file daily because it does not function without reloading. Is there any work around for this?
View 5 Replies
View Related
Jul 18, 2011
Is there any Functionality available for Reloading the PDF or Image like we have for DWGs (Database.ReloadXrefs).
View 2 Replies
View Related
Oct 31, 2012
When I attach a titleblock as an xref in paperspace, it is not lined up on my page that I have set up. It attaches to the upper right hand corner of my screen and I have to manually move it on top of my paperspace. I know there is a way to have them automatically line up.
View 2 Replies
View Related
Jul 12, 2013
I have just managed to create my own title block and have an area within for material. I always use the iProperties to populate the titleblock but there isnt a field for material? Is there a way to add a field so it does what i need?
View 4 Replies
View Related
Apr 15, 2013
Is there a way to change the saved version when running a titleblock update?
Even though my save preference is set 2010, anything saved during a titleblock update is in 2013.
Noticed this in 2013 & 2014
View 5 Replies
View Related
Aug 23, 2012
I got this weird issue when placing my custom made titleblocks in AutoCAD. All the attributes of the block jump to standard text style when placing it in my drawing. Allthough this ain't allways happening. It seems to me like there's a setting for this but i can't find out how.
It can happen suddenly too. Like when i open a new drawing and then add my titleblock, it's like it should be most of the times. Allthough when i start to edit the block (scale/move/copy,etc) it can change like you can see in the drawing below.
Offcourse, as a company, you do not want to deliver your drawings with a titleblock like this.
View 1 Replies
View Related
Dec 5, 2012
I have a problem with some of our drawing sheet attributes that we are updating from a CSV file. The attributes are originally in Arial Bold but when we run the update routine the font disappears, if we run the update routine a second time it reappears correctly updated but the font has changed from Arial Black to Standard.
I have rebuilt the titleblock and get the same result.
I cant get into the routine because its locked away in an FAS file and the manager is on holidays for a couple of weeks.
View 1 Replies
View Related