Having this problem with 2 lisp routines, i have autocad set up to load a certain profile. but every time I start autocad, i have to reload the 2 lisp routines thru appload.
View 2 RepliesAutoCAD 2014 isn't loading lisp routines when put in the start up suite.
They are loaded from a trusted location.
I am using AutoCad 2011 and am not seeing the bubble notifying when an xref needs to be reloaded. I do see the notification alert in the taskbar immediately after saving the xref, but do not see the bubble with the link to reload. XREFNOTIFY is set to 2. Thought XNOTIFYTIME might have worked but I don't know how to use it as typing it in the command line in AutoCad doesn't work. Also tried (setenv "XNOTIFYTIME" "#") but typing that in the command line doesn't work either.
View 9 Replies View RelatedHow to avoid nested references reload every time I open autocad drawing. In some drawings I have twenty nested references. I really need to avoid reload each reference.
View 1 Replies View RelatedWhen I load a lisp in a dwg, it doesn't stay loaded. I have loaded THIS lsp and, for some reason, I have to go back into APPLOAD and load the lsp for it to lock the viewports. I have also installed THIS lsp, and Im having the same problem. What could the problem be for lisps not staying loaded?
Using AutoCAD 2014 v1.18.0.0
I had been using AutoCAD 2012 x64 w/SP1 for quite a few months with no issues. A week or two ago I went to open a drawing and the program locked up. I tried opening AutoCAD via the desktop shortcut and directly from acad.exe and it locks up immediately. I tried uninstalling and reinstalling 2012, but the issue persisted. I tried uninstalling and reinstalling without any service packs. I normally don't use Windows Update and hadn't downloaded any updates prior to these issues, but I did it to see if it would fix the issue and it did not. I uninstalled 2012 and installed AutoCAD 2011 x64 only to have the same exact issue. I have an old version, AutoCAD 2002 that works fine, but my job always receives drawings not saved in 2000, and my convert tool sometimes fails to convert them to a version I can open. A friend of mine pointed me to this thread here: URL.... I am using Windows 7 x64 on a somewhat up to date PC that I built myself.
View 1 Replies View Related When starting acad with Startup set to 0 or when launching from a drawing on file, I do not have any problems, however, when Startup is set to 1, not only does the startup menu appear as a blank pop -up, but the AutoCAD splash screen just hangs without the program launching.
Could it be due to the fact that I am running a 64 bit System?
I would like to have my autocad start with my osnap settings, grid off, ortho on, etc. I am not a fan of the grid, and I have to turn it off everytime I start a drawing. Is there a way to create this as a normal setup?
View 2 Replies View RelatedI have been given a new lap top plus the updated AutoCAD rev. 2012.Supposedly it is superior to my old laptop but... it runs slower, the mouse action is awful, it's like stirring cold porridge.
Anyway, I have spent the first week battling with various bits, trying to get it to look & feel like my previous laptop using 2010.
The big issue I have is upon start up. Rather than loading the standard AutoCAD "drawing 1" regardless, I want to have the browser open up so I can select the' previous drawings loaded on my last session or select a new drawing or browse folders to find the drawing I want.
how I managed to switch this on, back when I managed it on 2010 version.I have given up on running up & down the menus.
How to get rid of this warning dialog:
It appears at startup. I recently installed software (Simtra PathPlanner) that works with AutoCAD that may have caused this.
Using AutoCAD 2012 on Windows 7 64-bit.
Is it possible to tie the applications loaded in the Startup Suite to profiles? Many of our clients have speciic requirements and we have client-specific routines to quickly create their drawings and loading a profile that loads only their routines would be a time saver.
View 1 Replies View RelatedUsing ACAD 2012, 64-bit desktop
I have a number of .lsp routines that I have loaded into the startup suite. I have their location pathed correctly and at the top of the list in the support file search path under options.
Problem is...they load into the drawing when a drawing is opened, but they will not execute. If I type APPLOAD and re-load them individually, they all seem to work fine.
I'm only having this problem with the computers that are running 2012 in the office.
I have been getting fatal errors during my user account but not in my admin account. I logged in as admin and repaired Autocad Architecture 2010, using the system disk. I got back the report that Autocad was repaired. However, when I returned to my user account, I get an unhandled expection error when I start up Autocad.Architecture 2010. Do I need to uninstall Autocad Architecture 2010 and then reinstall or should I just pick the option to reinstall Autocad Architecture and then do I have to another registration code?
View 1 Replies View RelatedWhen I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Description
Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: AdRefMan.exe
Application Version: 18.2.51.0
Application Timestamp: 4d4b63d1
Fault Module Name: AdRefMan.exe
Fault Module Version: 18.2.51.0
Fault Module Timestamp: 4d4b63d1
Exception c0000005
Exception Offset: 000000000003dc71
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1035
Additional Information 1: 9416
Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260
Additional Information 3: c86b
Additional Information 4: c86b8562f11a561a601a7649b1d675a3
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
my tool palette causes a systematic crash at startup .
is there a way to launch without opening toolpalettes .?
I could have a drawing open, open up the xref, make a change in it save and close. I would get a message in the bottom corner of the drawing saying ‘RELOAD XREF’S’ I would hit that and it would update the changes I made.
I do that same change I won’t get any message saying ‘RELOAD’ and even if I type in ‘xref’ and reload the it that way, it doesn’t update any changes I made. I have to actually detach and re-attach it to see the changes I made.
I just updated my company .LIN file and now I need to find the most efficient way to reload all the linetypes into our template and some drawings hopefully without having to delete or purge them out.
View 2 Replies View RelatedI think I have erased my template folder. So setting up new drawing has been a problem. Can I load a new template folder?
View 4 Replies View RelatedI just installed AUTOCAD 2013 on my computer. Every morning when I start up, I have to reload by CUI file. My ribbons are rearranged, I have to arrange them back to how I had them. Why is this happening?
View 4 Replies View Relatedmy xref reloading in acad v2011, it's not working-but the xref file is in the folder and in the right path as well.
View 9 Replies View RelatedThis is a 2 fold question.
I have a drawing with 18 viewports, each one has (should have) a titleblock but xref manager tells me it is not found. Firstly, why would it now not be attached? And secondly, why am I not simply able to re-reference it? I tried to UNLOAD and DETACH it but it wont do it as there are multiple inserts. So I tried to RELOAD and ATTACH but no joy. It simply gives me the path to the referenced file (which is correct by the way) So, how do I reload the titleblock to each layout?
I have an addin which displays a form, then when I click a button operations are launched. The form is no modal, so I display it, select objects, apply, select objects, apply,... then close the form with another button (form.close).
All functions, but only on the first opened file : I open the file, use the addin, close the form. I open another file, the addin is always loaded, but when I click on the icon to display the form nothing happens... I have to unload the addin and reload it.
I have a bunch of drawings for which I have to reload the linetypes (they have to be redefined, for example pneumatic line has a new definition but the drawing has an older one). Is there a way other than rename the old linetypes, then load the newer version, then iterate through all objects and change the linetype to the newer version?
View 2 Replies View RelatedMy company recently upgraded to Autocad 2013 from 2008. I was using a custom dimension cui file for sizing dimensions according to scale. I have reloaded the file into 2013. However, I am having to reload the file daily because it does not function without reloading. Is there any work around for this?
View 5 Replies View RelatedIs there any Functionality available for Reloading the PDF or Image like we have for DWGs (Database.ReloadXrefs).
View 2 Replies View RelatedI'm add Add button on exists inventor ribbon tab.After reload my add-in from Inventor buttons is invisible
View 3 Replies View RelatedThis issue applies only to AuroCAD 2013 64. 2012 works fine.
I have three old custom menus I use regularly. They were all in the MNU format when they were compiled to CUIx.
Let's say menu1 has a drop down menu and toolbars. Menu2 has a dropdown menu. Menu3 has a toolbar menu. They are all located in the same folder.
If I load the three menus they work fine for the duration of the session. However, once I quit AutoCAD and restart, only Menu1 loads. I still have to load the other two again. This is annoying. I have created a Profile and a Workspace with the menus loaded and set both current. Exit and again no menus.
We recently upgraded from 2006 to 2013. We had a lisp routine in 06 that would reload all the xref's in a sheet so the layer states would update since simply reloading the xref did not always work. Below is the code we used. Now, in 2013, when we run it, I lose all layer states.
(defun c:xrl ()
(setvar "visretain" 0)
(command "_qsave")
(command "xref" "reload" "*")
(setvar "visretain" 1)
(command "_qsave")
I recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
View 7 Replies View RelatedSo I just upgraded to MEP 2013 last week and am in a bad situation where when I keep making my data link tables to a range on an excel table the file name's full address is not staying when I go to insert the table.
(ex. D:/Documents/JB Plans/NK.xlsm is just NK.xlsm when I try to insert the table)
Does some defaulting or setting that I haven't found involving this issue?