I could have a drawing open, open up the xref, make a change in it save and close. I would get a message in the bottom corner of the drawing saying ‘RELOAD XREF’S’ I would hit that and it would update the changes I made.
I do that same change I won’t get any message saying ‘RELOAD’ and even if I type in ‘xref’ and reload the it that way, it doesn’t update any changes I made. I have to actually detach and re-attach it to see the changes I made.
No plugin installed. Tried deleting the preferences several times. Installed latest wacom driver. Reinstalled two times Illustrator. Signed in and out of Creative Cloud. Verdana and Tahoma are installed.
Tried this solution without sucess.
Here is the log I have when I try launching Illustrator.
Lightroom 2 used to open the import window when I plugged in my iphone 3G but now it doesn't. It doesn't even show up and "import photos from device" is grayed out. I would like to be able to import photos from my iPhone as if it were a camera.
I'm using Photoshop CC on a 2008 MacBook running OS X Mountain Lion and have some issues using the polygonal lasso tool and the magnetic select tool: When making a selection I can close it by double tapping on the touchpad or clicking enter but not by doubleclicking on the touchpad or my Magic Mouse … yet the doubleclick function does still work e. g. when I doubleclick a layer in order to rename it.
I went to the Character panel and from there, I opened the list of installed fonts on my system. As I browsed the list, I spotted two fonts that I wanted to delete. When I tried to delete them, Windows 7 displayed a “Can’t delete — fonts in use” message. I closed Illustrator, and tried again to delete the two fonts. Again, I got the same message. I’m going to have to reboot to delete those fonts plus some others I’ve since identified. Doing that is a pain in the xxx because I’ve always got a bunch of stuff open.
Illustrator needs to release all fonts except those in use in the current document. I should be able to delete any other fonts at any time. If Illustrator or any other Adobe program is displaying a list of fonts at the time I delete a font, it should dynamically update the list.
using Illustrator CS. My Illustrator document size is 10,000 x 1920 pixels. I need to export from Illustrator at this size at 72 dpi but Illustrator says:
“Could not Export. Rasterized Image Exceeds Maximum Bounds for Save for Web"
I tried using “Export" and "Save for Web” but I get the same answer.
Can someone using CS 5 open a new document 10,000 x 1920 pixels and try to export it at 72 dpi and tell me if it works?
I enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
I just updated my company .LIN file and now I need to find the most efficient way to reload all the linetypes into our template and some drawings hopefully without having to delete or purge them out.
I just installed AUTOCAD 2013 on my computer. Every morning when I start up, I have to reload by CUI file. My ribbons are rearranged, I have to arrange them back to how I had them. Why is this happening?
I have a drawing with 18 viewports, each one has (should have) a titleblock but xref manager tells me it is not found. Firstly, why would it now not be attached? And secondly, why am I not simply able to re-reference it? I tried to UNLOAD and DETACH it but it wont do it as there are multiple inserts. So I tried to RELOAD and ATTACH but no joy. It simply gives me the path to the referenced file (which is correct by the way) So, how do I reload the titleblock to each layout?
Having this problem with 2 lisp routines, i have autocad set up to load a certain profile. but every time I start autocad, i have to reload the 2 lisp routines thru appload.
I have an addin which displays a form, then when I click a button operations are launched. The form is no modal, so I display it, select objects, apply, select objects, apply,... then close the form with another button (form.close).
All functions, but only on the first opened file : I open the file, use the addin, close the form. I open another file, the addin is always loaded, but when I click on the icon to display the form nothing happens... I have to unload the addin and reload it.
I have a bunch of drawings for which I have to reload the linetypes (they have to be redefined, for example pneumatic line has a new definition but the drawing has an older one). Is there a way other than rename the old linetypes, then load the newer version, then iterate through all objects and change the linetype to the newer version?
My company recently upgraded to Autocad 2013 from 2008. I was using a custom dimension cui file for sizing dimensions according to scale. I have reloaded the file into 2013. However, I am having to reload the file daily because it does not function without reloading. Is there any work around for this?
This issue applies only to AuroCAD 2013 64. 2012 works fine.
I have three old custom menus I use regularly. They were all in the MNU format when they were compiled to CUIx.
Let's say menu1 has a drop down menu and toolbars. Menu2 has a dropdown menu. Menu3 has a toolbar menu. They are all located in the same folder.
If I load the three menus they work fine for the duration of the session. However, once I quit AutoCAD and restart, only Menu1 loads. I still have to load the other two again. This is annoying. I have created a Profile and a Workspace with the menus loaded and set both current. Exit and again no menus.
We recently upgraded from 2006 to 2013. We had a lisp routine in 06 that would reload all the xref's in a sheet so the layer states would update since simply reloading the xref did not always work. Below is the code we used. Now, in 2013, when we run it, I lose all layer states.
I am using AutoCad 2011 and am not seeing the bubble notifying when an xref needs to be reloaded. I do see the notification alert in the taskbar immediately after saving the xref, but do not see the bubble with the link to reload. XREFNOTIFY is set to 2. Thought XNOTIFYTIME might have worked but I don't know how to use it as typing it in the command line in AutoCad doesn't work. Also tried (setenv "XNOTIFYTIME" "#") but typing that in the command line doesn't work either.
I recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
How to avoid nested references reload every time I open autocad drawing. In some drawings I have twenty nested references. I really need to avoid reload each reference.
So I just upgraded to MEP 2013 last week and am in a bad situation where when I keep making my data link tables to a range on an excel table the file name's full address is not staying when I go to insert the table.
(ex. D:/Documents/JB Plans/NK.xlsm is just NK.xlsm when I try to insert the table)
Does some defaulting or setting that I haven't found involving this issue?
Recently purchases Lumix fz200 camera. CS5 with ACR 6.3 won't read AWR raw files. Instructions are to manually load ACR 5.2 into Library/Application support/Adobe/Plug-ins/CS4/file formats after moving old file. Could not move old file so renamed it and installed new file after authenticating in response to error message "can't move. Plug in ACR 6.3 still active. Exactly how much of above library file must be moved and replaced? (Mac)
Something caused Photoshop CS3 to be corrupted so I uninstalled and reinstalled and I get the same error message. HAve been trying for a month and now I am desperate. The error message comes up with photoshop is first starting.
All it says is that Adobe Photoshop encountered an error and will now close. No numbers . . . nothing. I have uninstalled and deleted everything, ran CCLeaner afterwards and then downloaded a fresh copy, installed . . . same message. I am really in dire straits now with upcoming projects.
After going into dreamweaver and correcting the xhtml and css pages I rezip it to an epub. When I try to open the epub in adobe digital editons it will not open. I have tried it with one page and with many pages. I am using indesign cs6. This is for a fixed epub.
This is for a children's book and I need to go into dreamweaver and put the text on top of the image for each page using css. I give it the correct height and width.
How do I repair or re-load Photoshop CS3 in the Master Collection? The program is acting funny after several shutdowns, the preferences have been reset...and it still is behaving badly.
I usually just un-install and re-install Photoshop occasionally to get rid of hard gremlins...but...I am concerned with Master Collection. I spent weeks trying to install the original package...and the only way I could get it to install sanely was to wipe my disk to a clean windows install and then do the Master Suite First...otherwise the install would fail after an hour of loading in.
Usually when I have worked on a project and close the program, the next time I open my Xara program the previous documents I was working on would load, but not now. I'm having the same problem with XPX and just cannot seem to find what I may hae changed. Having that ability was sometimes a lifesaver.
