I'm using Photoshop CC on a 2008 MacBook running OS X Mountain Lion and have some issues using the polygonal lasso tool and the magnetic select tool: When making a selection I can close it by double tapping on the touchpad or clicking enter but not by doubleclicking on the touchpad or my Magic Mouse … yet the doubleclick function does still work e. g. when I doubleclick a layer in order to rename it.
View 6 RepliesWhen creating selection marquees, i.e. magnetic lasso, etc., I like to "set" lots of anchors close together when tracing along an object. I can't tell you how many times I've been 98% finished w/ a tedious selection, and accidentally closed a marquee because the system "thinks" I double-clicked. I've set my double-click speed in the windows control panel as fast as it will go, but this still happens. Del does not delete the last anchor point once the selection is finished. It cuts the selection out.
Ideally, I'd like a way to specify an altenative method in PS to finish selections, i.e. SHIFT CTR click, or ENTER, etc.
Does anyone know of there's some registry trick, etc. to accomplish this in Windows w/ CS2 or CS3.
As there a way to do this in PS prefs, etc, that I've totally missed. I just can't imagine I'm the only one having this annoying problem, but I can't find a single mention of it on google with what I felt were good search criteria.
At minimum, I'd be happy with a way to "Undo close selection", so I could resume setting anchors & finish it properly.
I just installed LT2013 and migratet my settings from LT2008.
Doubleclicking on a blok openes the block editor in LT2008, but not in LT2013.
In LT2008, the main cui file was acadlt.cui. And in this file the "block - double click" action was specified. And it worked in LT2008. I have my own cui-file which not contains any doubleclick-actions.
In LT2013, after migration from LT2008, the mail cui file is now my own cui-file (which not contains any doubleclick actions). Is this why it doesnt work ?
I have tryed to copy a doubleclickaction from acadlt.cui to "my own cui-file". And now it works.
Is this because "my " cui file now is the main cui file ? Why is "my" cui file the main cui file after migration ? is there a way to change, so acadlt.cui becomes the main cui file ?
If not, is there a way to transfer alle settings from acadlt.cui to "my" cui file ? I know i can do this one action of a time in "transfer".
I'm working on a new computer and some of the ACAD settings are different.. When I am in paperspace, I am used to just double-clicking in a viewport to work in modelspace..
Whether the viewport is locked or not, I am used to being able to zoom in and out to scale, or just work there and the viewport stays stationary.
There is some setting that is causing the viewport to "zoom out" every time I double click in the viewport. I have to then lock it which means that I can't change the zoom-to-scale factor.. It's also a pain in the neck.
Also, when I have multiple viewports open that are not locked, they all "zoom out" also when I double-click in one..
Any knowledge of some setvar to fix?
I could have a drawing open, open up the xref, make a change in it save and close. I would get a message in the bottom corner of the drawing saying ‘RELOAD XREF’S’ I would hit that and it would update the changes I made.
I do that same change I won’t get any message saying ‘RELOAD’ and even if I type in ‘xref’ and reload the it that way, it doesn’t update any changes I made. I have to actually detach and re-attach it to see the changes I made.
No plugin installed. Tried deleting the preferences several times. Installed latest wacom driver. Reinstalled two times Illustrator. Signed in and out of Creative Cloud. Verdana and Tahoma are installed.
Tried this solution without sucess.
Here is the log I have when I try launching Illustrator.
Lightroom 2 used to open the import window when I plugged in my iphone 3G but now it doesn't. It doesn't even show up and "import photos from device" is grayed out. I would like to be able to import photos from my iPhone as if it were a camera.
View 7 Replies View RelatedI went to the Character panel and from there, I opened the list of installed fonts on my system. As I browsed the list, I spotted two fonts that I wanted to delete. When I tried to delete them, Windows 7 displayed a “Can’t delete — fonts in use” message. I closed Illustrator, and tried again to delete the two fonts. Again, I got the same message. I’m going to have to reboot to delete those fonts plus some others I’ve since identified. Doing that is a pain in the xxx because I’ve always got a bunch of stuff open.
Illustrator needs to release all fonts except those in use in the current document. I should be able to delete any other fonts at any time. If Illustrator or any other Adobe program is displaying a list of fonts at the time I delete a font, it should dynamically update the list.
using Illustrator CS. My Illustrator document size is 10,000 x 1920 pixels. I need to export from Illustrator at this size at 72 dpi but Illustrator says:
“Could not Export. Rasterized Image Exceeds Maximum Bounds for Save for Web"
I tried using “Export" and "Save for Web” but I get the same answer.
Can someone using CS 5 open a new document 10,000 x 1920 pixels and try to export it at 72 dpi and tell me if it works?
I enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
View 5 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View Relatedhow to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.
View 5 Replies View RelatedUsing photoshop, how do you make a selection out of a text and expand the selection?
View 4 Replies View RelatedI am trying to cut a person out of a picture with a deatiled background so I am using the quickmask selection and paint brush. I'm done selecting the person and have gone back into normal editing mode. I then inversed the selection created within quickmask to select everything but the person in the background. When I click delete, the background vanishes and the person become opaque.
View 3 Replies View RelatedIf I have mad a selection with say an ellipse marque, of say 100px and now I want to fether that same selection outwards, ie to start the feather 10 px outward of the 100px selection so that the 100th px has a 100% transparency and the 110th px has a transparency of zero,thus making the new selection 110px, how could I go about doing it. With the current feathering of the selection, it feathers only in the marquee already selected, not outward, and you cannot place negative feathering px. I know that there is most likely some sort of a ration where you would expand the selection by a certain amount of px, and then apply a ratio of feathering to it to enalble it to feather outside of the 100px marquee.
View 3 Replies View RelatedWhen I pasted a selection made with the Marquee tool there is a transform grid around the pasted selection. I use a MAC and Photoshop CS6 and would like to deactive a feature for this automatic grid, if there is one.
View 3 Replies View RelatedWhen I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
When creating a selection Command using the PromptXXXOptions and PromptXXXResult. The entities are selected on the current view, but once the selection ends the entities return to an unselected state.
Is it possible to leave them in selection mode.
I want to this, because it will be better to use Editor.SelectImplied() instead of saving the last selection object Ids.
I've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
I am using Revit Arch 2011 and it is more natural for me to use shift to add to a selection and control to subtract from a selection. Can this be changed and how?
View 1 Replies View RelatedWhen I try to load updates, I am informed that I must close cs5.5 bridge. I then do so. I then try to load but am informed that cs5.5 bridge needs to be closed.
View 2 Replies View RelatedI am currently using a windows 7 Toshiba laptop. I have downloaded the free trial of Photoshop but after around 5 mintues of use, it encounters a problem and has to close. Unfortunately, windows can not find the problem. I am therefore unable to do any work. I have tried restarting the laptop several times but it still keeps happening.
View 2 Replies View RelatedMy photoshop 6 has just started locking-up and not letting me close the program.
I have reinstalled photoshop.
I purchased and installed the Adobe design premium CS3.
Photoshop usually close sudently without saving files.
the close-up tool, which by default used a (+) sign to amplify detail, switched to a (-) sign to show detail further away from the viewer. That's the magnifyin glass icon. It must have happened when using the Alt key.
But the (-) mode became permanent and there was no way to change it back to (+), even after re-setting tools, and even after uninstall re-install.
It took uninstall and deleted a subdirectory and its contents, where P.S. stores user parameters, that it installed as (+) which is the default mode.
I've just upgraded Creative Suite CS4 from CS2. But now, wen i launch Photoshop for the first time, it's running normally.But if i want to close it, it seems to be closed, but a photoshop process is still remaining in memory and i cant launchPhotoshop until a kill the first process.The computer is Intel Core Duo based with 2 Gb memory and an ATI 3450 512 Mb vga card.
View 6 Replies View RelatedI have photoshop 7.0 and have had no problems for years. Today when I was editing a photo it froze. It happened again when I click Image >adjustments>brightness and contrast....it freezes and won't let me close photoshop. I can minimize photoshop and work on other things-just not photoshop.
View 3 Replies View Related