AutoCAD Architecture :: Easy Way To Change Titleblock

Mar 8, 2011

My hospital has been bought out by another hospital. Is there an easy way to change my titleblock. I am using project navigator and I have changed my templates.

View 2 Replies


ADVERTISEMENT

AutoCAD Inventor :: ILogic Titleblock Textbox Change

Sep 10, 2013

I am trying to change the titleblock definition of a drawing when I run my custom ilogic code.  Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:

Currently the textbox for the part number is configured as below:

And I'd like to change it to this:

The code I have to find the part number is as follows:

Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =

[Code]....

View 3 Replies View Related

Revit :: Change Revision Number Starts From 0 In Titleblock?

Nov 19, 2013

Is it possible to change the Revision Number as starts from 0,1,2,....... in Revit Titleblock.

View 1 Replies View Related

VideoStudio :: Easy Way To Change Default Color On Transitions?

Apr 23, 2012

Many of the transition effects have a green color. Is there a way to change mulitples at a time or is the only way to do one at a time? I'd rather use a more neutral color than bright kelly green.

View 3 Replies View Related

AutoCAD Inventor :: Find Name Titleblock

Mar 11, 2013

I'm writing a tool to change iproperties in the titleblock.

But now we start using two different types of titleblocks.

I need to check which titleblock is present in the current sheet/drawing.

I use this code to place a titleblock:

Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")

How do I check if "sample_titleblock" is already present?

Autodesk Inventor Product Design Suite 2013 SP1.1

View 1 Replies View Related

AutoCad :: How To Reload Titleblock To Each Layout

May 4, 2011

This is a 2 fold question.

I have a drawing with 18 viewports, each one has (should have) a titleblock but xref manager tells me it is not found. Firstly, why would it now not be attached? And secondly, why am I not simply able to re-reference it? I tried to UNLOAD and DETACH it but it wont do it as there are multiple inserts. So I tried to RELOAD and ATTACH but no joy. It simply gives me the path to the referenced file (which is correct by the way) So, how do I reload the titleblock to each layout?

View 9 Replies View Related

AutoCAD .NET :: Swap Titleblock Between 2 Drawings

Feb 4, 2013

I have 2 files and I'd like to copy a titleblock from a template drawing and use it to replace an existing titleblock on an in progress drawing.  The titleblock on the in progress drawing has attributes, and I'd like to keep them when I put in the new titleblock.  The attribute tag names between the 2 titleblocks are the same.

I do not know the exact names of the titleblocks, only that they contain the words "title block" somewhere in their name.

I've developed for Inventor for a while now, but I'm completely new to AutoCAD.  How might I go about this?

I believe the basic steps would be something like this:

1.  Identify which object to copy from template sheet.

2.  Save that object to memory

3.  Identify object to replace in existing drawing

4.  Copy attributes and get position of existing titleblock

5.  Delete existing titleblock

6. Insert new titleblock and copy in attributes

I've taken the Autocad tutorials, and I've searched for relevant posts on ThroughTheInterface.  Is there someplace else to look which might give a more in-depth example of what I'm trying to accomplish?

Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1

View 4 Replies View Related

AutoCAD Civil 3D :: Display Projection In Titleblock?

May 18, 2006

If there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?

View 3 Replies View Related

AutoCAD 2010 :: Inserting Graphic In Titleblock?

Dec 13, 2013

how come when I insert an image (BMP) into my drawing border and then create a PDF, the graphic looks choppy?

I am using AutoCAD 2010. I am opening the BMP up in Paint, then copying and pasting into drawing titleblock.

View 4 Replies View Related

AutoCAD .NET :: Program To Access Titleblock Info?

Sep 11, 2012

I have an Inventor license that doesn't include Autocad.  We have some old Autocad drawings that I would like to write a program to extract the titleblock info which I believe is probably done with attributes.  Not sure though. 

is there any way for me to get to that info without having a seat of Autocad? In Inventor we can use apprentice to do similar things.

View 3 Replies View Related

AutoCad :: Keeping Modelspace Titleblock In Paperspace

Feb 12, 2013

I have a drawing I'm working from where everything was drawn in model space including the drawing titleblock and the grips for an archD plot. A single viewport is used in paper space that encompasses the entire drawing - titleblock and all. My problem is that I want to use a different scale in the paperspace layout but keep the titleblock (and archD plot grips). Adding another paperspace viewport in the centre of the original does not seem to work as when I adjust the viewport scale it zooms in far too much. Is there a simple solution that I am missing?

View 9 Replies View Related

AutoCAD 2010 :: Insert Barcode Into Titleblock

Oct 24, 2013

I need to insert a barcode into my drawing titleblock. I have the font loaded that I need, I just can't get it formatted so my barcode reader will read it. I am using the field "filename" to drive the text in the barcode. My issue is I need and asterisk as a prefix and a suffix to my file name so my barcode reader knows where to "start and stop". How can I format the field "filename" with an asterisk (*) as a prefix and suffix?

View 4 Replies View Related

AutoCAD Architecture :: Change The Look Of Tags

Apr 12, 2012

I like the usability of the door and window and section tags that come out of the box. I also love that they are on the ribbon. however, I would like to change the look of the tags. Like make smaller and change fonts, or adding info like room sq ftg.

View 4 Replies View Related

AutoCAD LT :: Logo Disappears From Titleblock And Files Corrupt?

Sep 10, 2013

I am working on a new project which is now at building control stage and am doing the following workflow:

View 5 Replies View Related

AutoCAD Inventor :: Titleblock - How To Display The Units Shown

Oct 24, 2012

I use a single IDW template for all my drawings.  In it, I've got multiple dim styles....  One is Inch, one is mm, and one shows alternate units as Inch (mm).

In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".

Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line? 

Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1

View 3 Replies View Related

AutoCAD 2013 :: Printing PDF - Titleblock And Some Hatches Don't Show Up

Jan 10, 2013

Whenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.

View 2 Replies View Related

AutoCAD Inventor :: Titleblock Differences Between Drawing Sheets

Aug 28, 2012

I'm setting up drg templates for a company. I need different drawing titles for each drg sheet, is this possible in Inventor 2012?

View 9 Replies View Related

AutoCAD 2013 :: XREF Titleblock Plotting Too Light

Jan 4, 2013

Working in AutoCAD 2013

Plotting from the Layout - Model is plotting fine, XREF Titleblock is plotting out too light, about 20% of what model plots.

XREFd on 0 layer (tried on different layer, result = no difference) all other aspects of plot are correct

XDWGFADECTL set at 1

LAYLOCKFADECTL set at 1

Print Preferences

- line and text (not photo)

- dpi 600

I found a work-around but it isn't realistic in the longterm, I inserted the Title block as a BLOCK and exploded it, and then the titleblock plotted fine with each of the different Title Block layers plotting correct to pen width.

View 3 Replies View Related

AutoCAD Inventor :: Drop Down Box In Titleblock Field Text?

May 28, 2012

I'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.

View 3 Replies View Related

AutoCAD Architecture :: How To Only Change Shape Of One Beam

Feb 24, 2011

I am creating custom beam shapes, but when I change one type, it changes them all. How do only change the shape of one beam?

View 1 Replies View Related

AutoCAD Architecture :: Change Workspace From 2D Drafting

Apr 15, 2011

Am I able to change the workspace from 2D Drafting and Annotation to Autocad Classic?  When I open the workspace dialogue box, AutoCAD Architecture is the only option.  With AutoCAD 2010, the workspace dialogue box gave me three options:  2D Drafting and Annotation, 3D Modeling and AutoCAD Classic.

How do I get Autocad Classic as a workspace option?

View 2 Replies View Related

AutoCAD Architecture :: Block Units Set To Mm - How To Change

Aug 14, 2012

I have revived an old project that was started about 2 years ago. I went to attach my title block in paper space and the drawing was itty bitty.

Seemed unusual because in another layout the title block is there with the same page setups etc.

Then I looked at the block units and they were set to mm.  Can it be changed?  If  so how?  Or am  I completely hooped?

ACA2011
Win7 64

View 1 Replies View Related

AutoCAD Architecture :: Unable To Change DIM SCALE

Apr 19, 2011

I can't seem to change the DIMSCALE.  I want to change this is our template.  It is 8'-0" and I can't get it to change to anything else.  I get a response of "Cannot set DIMSCALE to the value".  I have entered 1....1'=0"....0'=.8333....4'-0"  etc., etc.  Units are in Architecture Inches.   I've unchecked "Automatically Create Dimscale Override"; saved as Default; went to Options...AEC Dimension and unchecked everything in "Automatic Scale of AutoCAD Dimstyles" (don't know if that has anything to do with it). 

How do I change the DIMSCALE?

View 2 Replies View Related

AutoCAD Architecture :: Change Window Size

Sep 6, 2012

Sometimes when we place a window in a wall we can grab the grip and stretch it to any size we want. Other times the only sizes we can use are the standard sizes. I know how to add a standard size but how can we make it to where you can just strectch it to any size we want?

View 4 Replies View Related

AutoCAD Architecture :: Change The Color Of The Brick?

Jul 16, 2012

In the Style Manager Can we change the color of the brick instead of the imposed red one. I'am looking for a sand color.

View 9 Replies View Related

AutoCAD Architecture :: How To Change Time Between Backups

Apr 12, 2010

Over the past year we have had a problem arise on three projects and I can't seem to track down the cause. The first job it only happened once, the second it happened a few times and now on this third project it has happened twice in three days.

The issue is the dst file becomes corrupt and all of our sheet set info is lost. The backup of the dst file is overwritten every few minutes it seems and by the time we notice a problem, the backup has been overwritten by the corrupt file.

A few questions:

1) What is causing the problem? In reading other posts it seems to have something to do with more than one user writing to the file at the same time (but, this last time it happened, only one person in the office was working on the job).

2) Can we change the time between backups?

3) Is there an easier way to rebuild the sheet set?

View 5 Replies View Related

AutoCAD Architecture :: Scale Change Of Materials?

Mar 25, 2012

I am using Autocad Architecure 2011.  I chnage the scale of a material (CMU) but it does not update the rendering with new scale.  Is there a variable or something that is off?

View 5 Replies View Related

AutoCAD Architecture :: Unable To Change Color Of The Sun

Sep 5, 2013

I can't seem to change the color of the sun. Its stuck on a strange shade of brown. Also I created a new material. It was a shade of grey metallic paint. Except that it appears to have a red tint.

View 1 Replies View Related

AutoCAD Architecture :: Unable To Change Linetypes?

Dec 3, 2012

I have tried changing the linetype several different ways.  I have manually changed the linetype and I have also changed the linetype for that particular layer, and nothing happens.  I can change the color of the line, but when I try to change the linetype or weight it will not change. 

View 1 Replies View Related

AutoCAD Inventor :: Easy Way Of Multiple Slice?

May 10, 2013

i'm looking for a command,activex,plugin,vba ,c++ ,any external program or cut a solid object in multiples slices using paralel and equidistant cutters planes, like a tomography.

View 3 Replies View Related

AutoCAD Inventor :: Easy Way To Mirror Part

Sep 21, 2011

Is there an easy way to mirror a part?  I drew this from a sample and need the opposite handing.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved