I have tried changing the linetype several different ways. I have manually changed the linetype and I have also changed the linetype for that particular layer, and nothing happens. I can change the color of the line, but when I try to change the linetype or weight it will not change.
View 1 RepliesI can't seem to change the DIMSCALE. I want to change this is our template. It is 8'-0" and I can't get it to change to anything else. I get a response of "Cannot set DIMSCALE to the value". I have entered 1....1'=0"....0'=.8333....4'-0" etc., etc. Units are in Architecture Inches. I've unchecked "Automatically Create Dimscale Override"; saved as Default; went to Options...AEC Dimension and unchecked everything in "Automatic Scale of AutoCAD Dimstyles" (don't know if that has anything to do with it).
How do I change the DIMSCALE?
I can't seem to change the color of the sun. Its stuck on a strange shade of brown. Also I created a new material. It was a shade of grey metallic paint. Except that it appears to have a red tint.
View 1 Replies View Relatedwhy I am unable to see the linetypes properly when the LT scale is set.
For example a dashed line drawn in model space with the LT scale set at 48 normally shows a correct spacing between the dashes. It worked fine this morning, but for some reason it does not show properly this afternoon, and is a continuous line.
No matter what I seem to do, I can't get the line to show up as dashed. I "regenall", set the lt scale to 1, then back to 48, set the psltscale to 0 then to 1 (just for kicks). I've exited the drawing and come back to it, and still the result is the same.
I am using Autocad 2009.
See attached dwg with a basic layer, dim style and text style template. See that there are linetypes which I can't purge.
_TEMP.dwg
Linetypes are for example:
4382_F_08-10 GA Elevations$0$4382_F_1000-1 Lower Ground Floor Plan$0$ceiling details - Model$0$SW-CA-ZZZZ-ZZZ-2SC-AR-063001_Section4-4 - Default$0$AUSGEZOGEN
That's just one name and there is over a hundred similar ones! Maybe the name is too long for ACAD to handle?
Things I've tried.
wblock selected to new .dwg
audit, purge and audit, purge again.
Copy and pasting into blank template. Step 2.
10+ years in AutoCAD and haven't came accross this before.
Got a great LISP from Lee Mac to steal layers, dimensions and Text styles from the drawing. As long as I didn't take in the Linetypes I was fine. This LISP does a whole lot more than the things described above.
[URL]
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
Is there a way to change linetypes within a certain object?
EXAMPLE:
I want to show hidden lines under another object.
So far, what I do is trim the existing lines and draw new ones with a new layer.
I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedUnable to recover drawing, have tried recover, etc. tried inporting and exploding,
had this fatal error at time of crash FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 50f3488bh
Running CAD Arcitecture 2010 and I am not able to use the "save-as" function to save as a dwg file. Using the the same down-load disk I have not had any problem with "save-as" on my laptop.
View 3 Replies View RelatedJust upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
After upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies View RelatedI am new to autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?
View 1 Replies View RelatedI created my own tools of own content on my own pallets and then found . you can drag a whole tab into the browser to quickly archive your tools. Having reinstalled I have 'dropped the collections back to ACA12 and all my tools restored.
However I can no longer edit or add to these tool pallets. I cannot edit any properties within tools either. There is no lock symbol on the pallet that I can see, only a refresh symbol.
The .atc file they reference (found from the Content Browser location they came from) is not set to read only. Permissions seem to be set to allow read, modify, write etc. I first used the 'My Tool Catalog' provided but also copied it all back to a new catalog but it's still locked.
I'm having problems in exporting a window schedule from ACA 2010 to Excel. I have Excel 2010 installed on my home computer.
when I try to export I get the message that excel application may need to be loaded.
Suddenly I can't use Solid hatch. I tells me "Unable to update the solid fill" when I try to change a hatch pattern to Soild. And when I try to Hatch with Solid it tells me "Unable to fill the boundary with solid". I'm hatching a basic PLine Rectangle (all corners joined). Worked fine yesterday.
View 4 Replies View RelatedI am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
The text that I Entered in model page, can't show in layout page. How to solve
attached file.
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies View RelatedI am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedAll of the sudden I cannot double click on text to edit and I cannot select items before I use a command. If I have selected an object the delete button will not work.
View 1 Replies View RelatedIm trying to create a material for glass balustrade that will elevate and show outline but not block what is behind. Useful for shr screens (show tiling, taps etc) balustrade for balconies, stairs etc.
I have balustrade I'm working on now using a railing object. There are no posts at all and I'm using dynamic posts with a nothing material to cut up the guardrail material into pieces. So need the posts to disappear but stil cut the glass into sections. Also in elevation, need to see the glass outline but also to show what's behind. Normal glass in elevation rightly blocks what's behind (inside).
There is a problem with how materials operate. You are unable to use an object/material combination as a negative. For e.g. assigning my posts above a material that has 3d body turned off negates it impacting the glass (ie no longer cuts) so I have to 'see' the gaps otherwise the glass goes straight thru. The post has to be directly inline with the glass to cut (fair enough) but turning the 'gap' material 3D body display off and the railing def no longer sees the post cutting the glass just because 3d body is turned off in the material display. (not sure why these have to be linked. If glass has frame (shr screen) then it's ok. just turn off glass but if in the case of glass balustrade you need to be able to do it.
Im thinking maybe using another object rather than railing, like a curtain wall and having a very small width frame using normal glass material that will elevate and another glass material that will disappear.
I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.
I am creating new tool palettes for lab equipment blocks. I was able to create a new palette and drag and drop blocks into it. When I go to create other palettes I am unable to drag and drop blocks into them. I am able to drag and drop into the tool palette I previously created and then drag and drop into the new palette.
But when I shut off Autocad and reopen the new palettes disappear. How can I create a new tool palette and it works, then create other tool palettes and I can not drag and drop to it? I am using Autocad Architecture 2013.
I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 Replies View RelatedIn ACA2012, we cannot use the Publish command to overwrite an existing DWF file of same name, for instance you publish a set, then need to re-publish and overwrite the earlier version. We get an error message that the DWF is currently open in another program...when it clearly is not open anywhere and Design Review is closed. We have several servers running different versions of microsoft server, but the results are the same to any of them.
We do NOT get an error message when publishing/overwriting to the C: drive, only a network path. Also, if we use the Print command instead of Publish, well it only does the current page but it DOES allow the networked DWF to be overwritten.
I am puzzled by what could be the difference in that Publish will not overwrite a networked DWF file yet Print will?
This has never happened to us in previous versions of ACA or Design Review.
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies View RelatedI like the usability of the door and window and section tags that come out of the box. I also love that they are on the ribbon. however, I would like to change the look of the tags. Like make smaller and change fonts, or adding info like room sq ftg.
View 4 Replies View Related