AutoCad :: Unable To See Linetypes Properly When LT Scale Is Set
Sep 21, 2011
why I am unable to see the linetypes properly when the LT scale is set.
For example a dashed line drawn in model space with the LT scale set at 48 normally shows a correct spacing between the dashes. It worked fine this morning, but for some reason it does not show properly this afternoon, and is a continuous line.
No matter what I seem to do, I can't get the line to show up as dashed. I "regenall", set the lt scale to 1, then back to 48, set the psltscale to 0 then to 1 (just for kicks). I've exited the drawing and come back to it, and still the result is the same.
I am using Autocad 2009.
View 5 Replies
ADVERTISEMENT
Jan 31, 2012
We generally use psltscale, msltscale, celtscale, ltscale all set to 1.
However, is there any way to have only certain objects or certain linetypes ignore the psltscale? The idea is to have a linetype that represents true scale objects (like a CGMP pipe) that does not change scale in the viewport.
View 1 Replies
View Related
Dec 3, 2012
I have tried changing the linetype several different ways. I have manually changed the linetype and I have also changed the linetype for that particular layer, and nothing happens. I can change the color of the line, but when I try to change the linetype or weight it will not change.
View 1 Replies
View Related
Apr 25, 2013
See attached dwg with a basic layer, dim style and text style template. See that there are linetypes which I can't purge.
_TEMP.dwg
Linetypes are for example:
4382_F_08-10 GA Elevations$0$4382_F_1000-1 Lower Ground Floor Plan$0$ceiling details - Model$0$SW-CA-ZZZZ-ZZZ-2SC-AR-063001_Section4-4 - Default$0$AUSGEZOGEN
That's just one name and there is over a hundred similar ones! Maybe the name is too long for ACAD to handle?
Things I've tried.
wblock selected to new .dwg
audit, purge and audit, purge again.
Copy and pasting into blank template. Step 2.
10+ years in AutoCAD and haven't came accross this before.
Got a great LISP from Lee Mac to steal layers, dimensions and Text styles from the drawing. As long as I didn't take in the Linetypes I was fine. This LISP does a whole lot more than the things described above.
[URL]
View 9 Replies
View Related
Jul 24, 2012
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
View 4 Replies
View Related
Jul 17, 2013
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
View 9 Replies
View Related
Jul 19, 2013
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies
View Related
Jun 13, 2008
how do you get the scale to show up properly in the title block? I've been searching and finding nothing on this issue, with exception of Autodesk personnel telling users to use the scale display on the views. I know it's not the "Autodesk way" of doing things, but my company has been putting the main view scale in the title block for over 30 years.
I've been using Patrick de Stobbeleir's "iProperty Collection" utility since Inv11, and it does the job. The thing that bugs me, though, is that I can't figure out how to get the FirstViewScale:x custom properties to work intelligently in my title blocks. I just use the property FirstViewScale in my title block, which displays the scale of the first view put down...no matter what the sheet.
how I can use the FirstViewScale:x property in title blocks such that x is the sheet number? So far we just have the first sheet use the FirstViewScale, and then subsequent sheets use a prompted entry (I know it's an ugly work-around).
View 9 Replies
View Related
Apr 11, 2013
I have this simple dynamic block that is to change from 4" to 6" to 8" square. I have a linear parameter, 0 grips, and a Lookup function for 4, 6 or 8. It is supposed to scale about the midpoint (insertion point). I have tried both the Midpoint and Startpoint settings for Base Location but it always seems to scale from the far left of the Linear Parameter.
using 2012 LT
View 2 Replies
View Related
Mar 10, 2013
[URL] as you can see in the attachment. I need to scale the boot fits into the feet properly. I have tried to do that by adjusting polygons and vertex but it doesn't make a good result. I am wondering is there any sophisticated method to exactly fit the boot into the feet without any clipping and extra space as seen in the image.
View 1 Replies
View Related
Jun 1, 2012
the move and scale tools have decided to stop working. Although I can still move things around, I can't move them up and down, not to mention that the tools themselves don't show up.
View 2 Replies
View Related
Oct 17, 2012
I enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
View 5 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
May 17, 2011
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies
View Related
Apr 19, 2013
I am unable to use properly CorelDRAW X4 due to measurement issues.I have a simple document I wish to work on with size 20,45cm x 15,40cm
I first create a new empty file (A4). Then I click on the empty working area and select on the toolbar the measure of the area (where I already find 210 cm and 297 cm). I try to change the measure from 210 to 180 (as example) and after I type 180 and press enter the value changes to 1,800 cm and the working area becomes very very big.
I am unable to obtain what I need.I do not understand the behavior of this software and do not know what to do.I tired to delete Corel user profile but nothing has changed.The software has always worked properly. My OS is Windows 7 Pro x64.
View 10 Replies
View Related
Dec 25, 2011
I've never been able to use the Clone tool properly in PSP.You can see that the cloning is blotchy and just isn't right...
View 10 Replies
View Related
Nov 20, 2013
I can't seem to get max to render to texture properly with network rendering. it renders just fine on one machine, but whenever i run it through the network option it saves the wron part of the strip.
I have tried it with several different machines and several different files and none of them work.
View 1 Replies
View Related
Apr 19, 2011
I can't seem to change the DIMSCALE. I want to change this is our template. It is 8'-0" and I can't get it to change to anything else. I get a response of "Cannot set DIMSCALE to the value". I have entered 1....1'=0"....0'=.8333....4'-0" etc., etc. Units are in Architecture Inches. I've unchecked "Automatically Create Dimscale Override"; saved as Default; went to Options...AEC Dimension and unchecked everything in "Automatic Scale of AutoCAD Dimstyles" (don't know if that has anything to do with it).
How do I change the DIMSCALE?
View 2 Replies
View Related
Aug 6, 2013
Someone was using my computer and maybe they clicked on some button but now if I am in a layout and double click on my viewport I can not change the View Scale by typing in a custom scale.
I typically work in meters and do subdivision layout so I use 1:500 up to 1:5,000 but now even though the view ports are unlocked the number will not change when I type it in but I can zoom in and out with my mouse.
I can pick a scale in viewport scale like 1:5 1:1 but prefer to type in my scale as I like to plot it.
View 3 Replies
View Related
Jan 5, 2012
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies
View Related
Nov 18, 2008
I hate 3d orbit with a passion on autoCad / Revit. It is impossible to do detailed design work on a small scale because every time you need to pan around a corner junction for example the whole screen shifts and you lose what you were doing. I understand the way that the 3d orbit tool works is that it picks the pivot point according to the closest object to the cursor.
This however does not work at all well. It always picks the same point on the screen no matter where you are working or where the cursor is pointing. There are times when it does work, however the majority of the time it doesn't. This is where sketchUp is good - the orbit tool is excellent along with its perspective projection. It seems to intuitively pin point exactly where you wish to pivot. Unfortunately everything else about sketchup i hate.
View 9 Replies
View Related
Jun 8, 2011
I just started using 2012. Two problems:
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
View 9 Replies
View Related
Mar 24, 2013
i created a mask in my footage by using pencil tool
now i want to scale it down (NOT to shrink/expand masked area)
tried this: selected footage layer and went to Transform - Scale, and even if i scale down to -500%, nothing happens. Then went to Mask - Mask Expansion, but this is not the feature i need. I need to scale down the object which i've masked out
also tried to add adjustment layer and linked my mask layer to it and then tried to scale down Adjustment layer - no effect, simply nothing happens
using AE6 trial version on win7
View 7 Replies
View Related
Mar 7, 2013
I'm trying to scale a pattern to fit the entire canvas without tiling it over the whole layer. To try to do this, I made a rectangular selection box, then dragged and dropped a pattern into the box. This created a new layer called "clipboard". I right clicked the clipboard layer, then left clicked "Scale Layer". Then I entered a width and height in pixels that matched the size of the canvas. The selection does expand, but it doesn't fill the entire canvas.
View 11 Replies
View Related
Jan 31, 2011
How can I purge linetypes? We get data from outside sources and my goal is to load our linetypes. I have a list of layers and store the previous layer linetypes. I reset them all to "Continuous". Now I have to purge the old linetype definitions but I can't make them go away. I need to purge DASHED and HIDDEN so far. If I open the file and click on the linetype in layer manager, I still see the old DASHED and HIDDEN definitions. I have tried db.purge(linetypeobjectid) but they don't go away.
Do I need to go through the symboltablerecord to find the correct linetypetablerecord and remove it? Will that remove the linetype from the list shown in layer manager? That is what I need to do - make sure DASHED and HIDDEN *have* to be re-loaded from our linetypes.
View 6 Replies
View Related
Mar 15, 2013
I can actually purge these hidden line types.
The line types in question are funky looking line types that do not exist within our office. They often contain "$$" and and/or file names and other odd characters as if they are remnants of binding a drawing. In any case, they are not visible anywhere in the drawing. We refer to these drawings as being "infected".
If any object, i.e. block, text or even a simple line, is copied from an infected drawing into an uninfected drawing, all of the mysterious line types follow. And when I say all, I mean 50+. Furthermore, copying from one infected to another infected will double the line types. So, as you can see, if undetected, you could easily have 100's of "line types" on a drawing which substantially increases the size of the .dwg file.
The process that I have created (from researching on the internet) is to save the .dwg into a .dxf. Close the .dxf and then PURGE. Purging the .dwg will not work. And, you MUST close and re-open the created .dxf in order to purge these files. The you can again save as a .dwg. To complicate things, occasionally a .dwg will not save as a .dxf unless I AUDIT it first.
Needless to say, this is a giant pain in that the files that are infected are at least 50 in number. I have created a macro or two to at least reduce some of the steps. Unfortunately, since the .dxf must be closed and re-opened (which cannot be done in a macro) an all encompassing macro cannot be written.
View 9 Replies
View Related
Dec 7, 2011
In one viewport i have a contour drawn as a dashed line. to show the item is hidden.In Another viewport i freeze all layers 'above' this item leaving only the item in the dashed line. is is possible, without copying the line to have the line come through in the later viewport as a continuous line, but remain in the first viewport as dashed?
View 1 Replies
View Related
Feb 27, 2013
Need some customized linetypes for RW, PL, and so on that I can use?
View 9 Replies
View Related
Oct 14, 2013
I am using the "Make Linetype" command under the express tools to make a linetype with a single circle in it, but its not working. I tried making my circle a polygon but that didn't work either. How do I get a circle into my linetype?
View 9 Replies
View Related
May 3, 2011
I am having trouble getting my linetypes to show up. Many are set by layer and are not showing up. How to toggle it so they show up.
View 8 Replies
View Related
Nov 21, 2011
So i have all these linetypes (see image) that i think originated in Microstation and have appeared on my computer when i binded a few DWGs derived from DGNs. (I can explain all that more if you think its warrented).
This is basicly what keeps happening.
- I open a brand new template, all line types are there (usual: dashed, phantom etc).
- I can work away happily, untill i copy something (a line, text, circle....) from a drawing that has these linetypes and BAM they all appear in the new drawing.
In this way, the linetypes have 'spread' into quite a few dwg's, and i cannot get rid of them once they are in the drawing and its saved.
A few other things....
- Other people in the office can open the drawings on their computers = NO weird Linetypes appear. Some open it and they do appear. (so if you open the dwg attached to this and find no linetypes, i dont know why!)
- The linetypes wont purge due to being in use etc
I would say the problem has originated from when I binded the xrefs, which is fine, but how to i fix it now?
The two main xrefs that appear to be referenced in the linetypes description are being used by other people in the workplace so i cant just delete them and start again.
View 9 Replies
View Related
