I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 RepliesBefore rendering the program write:
make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.
I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
I am using arch 2009, I have a bizarre issue with the rendering output soley based it seems on what version of Autocad the original drawing was created.
I have a block with 3d elements & materials, I insert it on any drawing which was created in release 14 which just about 100% of our drawings are (because you know, you take your old title blocks, convert then to the new version of Autocad, year after year after year, so the original title block was created way back when, just saved in the new format.) Anyhows, these are where the 3d blocks were created, newly in r2009, on on drawings originally created a long time ago. We just created new office title blocks from scratch in r2009 starting with the acad.dwt template.
When you insert any of these blocks, render it, the colors are different, too bright. here are all the specs for both drawings, one with the corect colors, one without. We have a ton of these blocks created over the last year or so which we render in Acad for the graphics guy to use for color elevations so its a pretty big deal if the color output is not reliable, it should be the same if all your settings are the same regardless of where the drawing file came from. I have missed something, and its probably something simple, it always is.
1. Same block with same material specs, verified on both drawings.
2. Zero lights, as per the lightlist on both drawings.
3. LINEARBRIGHTNESS - set to zero on both drawings.
4. LINEARCONTRAST- set to zero on both drawings.
5. DEFAULTLIGHTING - set to ONE on both drawings, viewport.
6. DEFAULTLIGHTINGTYPE - set to ONE on both drawings, viewport.
7. Render envirionment & render settting dialogue boxes, match line for line, verified.
Here are the 2 rendered images of the same block inserted on 2 different drawings. The darker one is the correct one:
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
why I get an exclamation point error message upon closing an AutoCAD file? And it can be two or three of the same error. That is, I close one error message and another follows it.
View 1 Replies View RelatedI've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedI wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.
View 9 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedI am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
I am new to autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?
View 1 Replies View RelatedI get the following error message when trying to export a file from LR 4.1 using Windows 7:
Unable to Export: An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
I'm using Lion, and to install the Leopard version of GIMP. I'm getting an error message, and don't know what action to take:
Unable to open a test swap file.
To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/Users/myname/Library/Application Support/Gimp").
When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).
In ACA2012, we cannot use the Publish command to overwrite an existing DWF file of same name, for instance you publish a set, then need to re-publish and overwrite the earlier version. We get an error message that the DWF is currently open in another program...when it clearly is not open anywhere and Design Review is closed. We have several servers running different versions of microsoft server, but the results are the same to any of them.
We do NOT get an error message when publishing/overwriting to the C: drive, only a network path. Also, if we use the Print command instead of Publish, well it only does the current page but it DOES allow the networked DWF to be overwritten.
I am puzzled by what could be the difference in that Publish will not overwrite a networked DWF file yet Print will?
This has never happened to us in previous versions of ACA or Design Review.
I'm using AutoCAD Architecture 2012. I cannot get the darn thing to create an Etransmit file. I'm sure it is some setting that I'm missing, but for the life of me I can not find it! It runs everything just like it is creating the file, but when everything is done, there is no file. I thought maybe it is creating the file somewhere that I didn't tell it to create the file at, but I can't find the file any where on my computer.
what I'm doing now is closing out 2012 and opening the file(s) in 2011 and creating the etransmit there, because it works. Is this a bug for 2012?
on my system Premiere Pro CC is only using GPU rendering with AVI output formats.
All other formats like MPEG2, Quicktime, H.264 are unfortunatly fully CPU rendered (=slow).
I just upgraded from trial to payed mode and when Premiere started the CUDA was already enabled (might have activated it during trial already).
But anyway I checked if my card was in the support txt file and also used the cuda.zip auto tool to make sure I had no typo.I did this for Premiere Pro CC and also copied the list into the Adobe Media Encoder directory.
So I started playing with input and output formats. It turned out that CUDA is currently only working with AVI output. I installed GPU-Z to check my GPU usage vs CPU usage in the task manager.
As soon as I pick any other output format than AVI - CPU usage during rendering is up to 80-90 and GPU at 0%.
With AVI output GPU ist around 30 and CPU in the 40ties or less as it should be.One of my old applications Cyberlink Power Produces 11 is doing the h264 rendering in half the time.
My System is running on:
Asus P8Z77-V Deluxe with 16GB Ram
Nvidia GeForce GTX 660 Ti (with current Driver - 332.21 )
Windows 8.1 Pro 64-Bit (with Media Center) and latest updates
Current entry in CUDA*.txt file (as printed by Adobe GPUSniffer):
GeForce GTX 660 Ti
And already tried:
GeForce GTX 660Ti
GeForce GTX 660
I am working with MTS files (AVCHD, 1920x1080, interlaced, 25 fps) in Premiere CS 6, Windows, and want to render my project with the same properties as h.264.
[URL]
A common misconception is that CUDA/OpenCL processing is only used for rendering for previews. That is not true. CUDA/OpenCL processing can be used for rendering for final output, too.
But where/what are the options/settings to use CUDA not only for preview purposes, but for accelerating the rendering of the final output, too?
When I use my autoCAD at the office to create a Sheet set file I allways get the message "Unable to Create a sheet Set file". Is there a way correct this problem.I am using AutoCAD 2012 on a network. I have tryed to create sheet set files on my local C: drive and other drives without any luck.
View 1 Replies View RelatedI have recently installed Inventor Professional 2012 Student Version, and I'm unable to create a new file, as the program crashes as I try to do so.
After starting Inventor, I select New than Standard.ipt. The file starts loading, the status of the loading process can be seen in the bottom left corner, than the "Open Documets in Session" counter in the bottom right corner changes from 0 to 1, as it should, I guess. And than, the program freezes. Sometimes, a message appears after several minutes that an error has occured, and that I should send an error report to Autodesk (which I did); but sometimes, no message appears at all, it simply crashes.
My computer specs are: Intel Core 2 @1,86 GHz, 2 GB RAM, NVidia GeForce 9800 GTX, 60 GB free space, Windows Vista (hotfix installed) Not a powerhouse, but I think it should be able to start a file properly I think, if I understand the system requirements correctly.
I am using AutoCAD 2012. I’ve come to realize that my Sheet Set command won’t work, as I cannot get any sheet sets to open. When I select a sheet and try and open it, nothing happens at all.
Also, I did get an error message when trying to create a new sheet set, “Unable to create sheet set file: *filename*”
I have had this product for about a week and it is fabulous compared to any other video editors I have tested.
There is something odd happening, however. I am using the Mercalli plug-in to stabilize hand-held videos. This works great but the rendered video always has a message overlaid saying the Mercalli analysis must be re-run (even if it has just been done). There IS an exception: render to mpeg4 and everything's fine - stabilization has been applied and no message. If I then take the exact same project (no changes) and render into AVCHD (for example), the output is ruined with the overlay. If I go back into the project again to have a look at what's up re-analysis is NOT called for.
I added two output parameters in my custom SA. I no longer want them in there. But I can't find a way to delete them.
View 2 Replies View RelatedFor some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
View 6 Replies View RelatedI am currently using Autocad Architecture 2010 and would like to change the rendering options if possible. I have drawn something and can view it in realistic style, but when I render it, the lighting comes into play and everything looks too light. What I would like to know is how could I render my drawing in realistic view so that the rendering reflects what is on my screen in model space? Or realistic sketchy view for that matter?
View 1 Replies View RelatedI am getting an error message when I am trying to insert a schedule room tag. It does not matter which room tag out of the content browser I select, I get the same message. the message is as follow: "No symbol has been specified for the tag" All of the tags have worked up until today. Nothing has changed that I know of on our network and all of the paths seem to be pointing to the correct directories. We are currently using Architecture 2008. This problem is only coming up with these specific room tags.
View 3 Replies View RelatedI'm trying to create a new local file but the option is greyed out (not available). We're using Revit Server 2013 and we have one Central Server and two Accelerators in different locations. This issue is affecting only one of the two locations.
View 1 Replies View RelatedI'm making a short animation on 3ds max design, it's supposed to be about 10 seconds, and I can't seem to find where I can control the animation speed. I render out the frames to AVI format, (abot 250 frames) but when I play the animation in VCL or any other mediaplayer, it seems to lack length completely - the timeindicator shows 00.00.00. I attached just a test animation, it's there but something's wrong..
View 9 Replies View RelatedEvery time I render a scene one side of my building are always solid black. How can I make the shadows be more transparent?
View 2 Replies View Related