When I use my autoCAD at the office to create a Sheet set file I allways get the message "Unable to Create a sheet Set file". Is there a way correct this problem.I am using AutoCAD 2012 on a network. I have tryed to create sheet set files on my local C: drive and other drives without any luck.
View 1 RepliesI am using AutoCAD 2012. I’ve come to realize that my Sheet Set command won’t work, as I cannot get any sheet sets to open. When I select a sheet and try and open it, nothing happens at all.
Also, I did get an error message when trying to create a new sheet set, “Unable to create sheet set file: *filename*”
I am using ver AutoCAD 2012. (Network Liciences) I get the message "Unable to create Sheet sets" in AutoCAD 2012. I also cant open previous made sheet set files
View 3 Replies View RelatedThe company I work for has a large number of Left Hand and Right Hand sheet metal parts. To reduce the amount of time needed to create both Left Hand and Right Hand sheet metal parts, I use the Derived Part icon. I create a Left Hand part, use the derive icon with mirroring on and create the Right Hand part. While the Right Hand sheet metal part gets created, the Right Hand part will not allow me to create a Flat Pattern.
what steps must I follow to create a derived sheet metal part that I can make a Flat Pattern with?
I am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedBefore rendering the program write:
make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.
I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
I have recently installed Inventor Professional 2012 Student Version, and I'm unable to create a new file, as the program crashes as I try to do so.
After starting Inventor, I select New than Standard.ipt. The file starts loading, the status of the loading process can be seen in the bottom left corner, than the "Open Documets in Session" counter in the bottom right corner changes from 0 to 1, as it should, I guess. And than, the program freezes. Sometimes, a message appears after several minutes that an error has occured, and that I should send an error report to Autodesk (which I did); but sometimes, no message appears at all, it simply crashes.
My computer specs are: Intel Core 2 @1,86 GHz, 2 GB RAM, NVidia GeForce 9800 GTX, 60 GB free space, Windows Vista (hotfix installed) Not a powerhouse, but I think it should be able to start a file properly I think, if I understand the system requirements correctly.
To make things easier to understand, I'll explain what I do: our sports' photography department makes photos of several sports teams, we print the photos, we put them in a basic two-sheeted album, and then send the photos to the team. As we print all the photos together, they are on a big pile and it's very difficult to sort them with the correct team name. So we take the printed photo, and compare it to all the team photos on the computer, which have the team name in the file name. So this is a very inefficient and slow process.
I was thinking of printing the photos as thumbnails on a sheet, and THEN compare them to the printed sports' photos. It's a lot easier to have a piece of paper with e.g. 10 photos to compare to than browse them on a computer.
So, again, I hope there's a way to let Photoshop put 10 thumbnails on a single sheet, and put the file name below it. All automatically (with an action?) of course.
I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 Replies View RelatedI'm trying to create a new local file but the option is greyed out (not available). We're using Revit Server 2013 and we have one Central Server and two Accelerators in different locations. This issue is affecting only one of the two locations.
View 1 Replies View RelatedI'm making a short animation on 3ds max design, it's supposed to be about 10 seconds, and I can't seem to find where I can control the animation speed. I render out the frames to AVI format, (abot 250 frames) but when I play the animation in VCL or any other mediaplayer, it seems to lack length completely - the timeindicator shows 00.00.00. I attached just a test animation, it's there but something's wrong..
View 9 Replies View RelatedI couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file.I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another. I have rebooted with no avail.
View 5 Replies View RelatedI am converting 1100 files from RAW to JPEG in ACR and after about every 10 or 15 images I randomly get the script alert 'I am unable to create a file in this folder. Please check your access rights to this location'
Under the properties on that folder 'full permission' is checked for everything. All of the images that have been processed are saved into that folder as well.
I've encountered a pretty nasty problem over the past week. I can no longer add specific layouts to existing sheet sets. I can make a new sheet set, but I cannot see the drawings that I would like to add to the sheet set.
The only "solution" I've found is to make a new sheet set, save each of the desired dwgs as newly renamed dwgs, and then, f if I pat myself on the head and spin around in 3 complete circles, I have a 78% chance of being able to add them to the new sheet set.
Obviously, this is like cutting off your hand and holding it, while your friend shakes your deadhand, instead of just shaking his hand.
I've read about this so-called dbl file, but much like Bigfoot, I have not seen one with my own eyes. We have never had this problem in our office- got a new server- had this problem (isolated to the new drive) - got it "fixed" - problem has spread to older drives.
Civil 3D 2010, Windows 7
As of today, my sheet set manager is unable to open any sheet set files (*.dst). It was working fine yesterday. There is no error message or prompt; it simply won't open them.
At first I thought it was some compatibility issue, since I recently upgraded from ACAD 2011 to ACAD 2012 (both 64 bits), but the dst file was created using 2012. I had been even creating new sheets and modifying the dst properties as recently as yesterday.
I opened the same files in my still-installed 2011 and the same result.
However, I went to some colleague's computer to open the same files, since the files are located in a networked environment, and voilá, the dst works perfectly. My colleague still uses 2011.
This means there is something wrong with "me".
Also, when I try to create a new sheet set file via the Sheet set Wizard, when I go from "Sheet Set Details" to "Choose Layouts" I can't and it throws me the message "Unable to create sheet set file: [route]".
My work entails regenerating new drawings from aging specification drawings and figures. Very little actual CAD, more hand-tracing JPGs than anything. I'm new to AutoCAD LT and haven't used most of its features. But the one feature I really need right now is to be able to print a black box on a sheet of paper.
As in, a 2-D closed polygon with a solid black fill. Unfortunately, AutoCAD LT doesn't think I should be allowed to print a black box on a sheet of paper.
I've tried assigning the color to the box using properties. I've tried defining layers and moving the box to the "black" layer (funny that "black" isn't a defined color in AutoCAD...that's way cool...). I've tried various settings in the Plotter setup screen.
I have a color plot table selected and I'm trying to print to .PDF. I work strictly out of the model view and do a lot of print previews. What am I, or have I, done, or not done, that I'm supposed to be doing, to print the box?
For some reason I cannot unfold sheet metal product on attached file. Where have I made a mistake? I used extruding, also sheet metal thickness from rule has been set to 2mm. Rest are default values.
View 2 Replies View RelatedI'm looking to unfold the attached sheet metal elbow and am unable to do so. After modeling the part I was also unable to rip an opening to split the part. I opted to cut an opening with a profile, but I am still unable to unfold the part. The probelm is likely obvious and I believe it is because I used part splits to create the different sections.
View 2 Replies View RelatedNow that I have all my custom properties set up I can't seem to update the custom ones that I made. The custom properties I have added do not seem to work when I update them the through the Sheet Set Manger properties.
View 5 Replies View RelatedI'm having trouble creating a flat pattern from a solid i've modelled.
Workflow: Created a 2D sketch in xy plane and extruded -1084 mm in z dir. Created cut, and extruded slots which were then patterned with rectangular pattern.
Converted to sheet metal, and then tried to flat pattern.
Tried to remove all features exept the 1st extrude, still having the same problem.
I have tried to set the correct material and sheet metal defaults, but still no luck.
I am trying to export each sheet in an Excel file to an separateTXT files.
I currently have code to read each cell in a sheet, but unfortunately some of the Excel sheets have in excess of 5000 cells and it is taking too long to read. So I am switching to another method.
The program will check dates of TXT files and XLS file to make sure TXT files are current (if not, open and recreate TXT files).Then read the TXT files (much faster).
Where I am getting stuck is 2 places -
Get the names of each sheet in the excel file (not always a known name)
Save each sheet as separate TXT file.
Here is condensed code so far without error checking, etc -
(defun E2TXT (FileName /)
(if (and (setq XLfile (findfile FileName)) (vl-file-systime XLfile) (setq XLapp (vlax-get-or-create-object "Excel.Application")))
(progn
[Code]....
How to create sheet set manager and how to use them? Need brief of steps regarding this.
View 4 Replies View RelatedI want to reference an idw sheet from one file into another idw file.
Purpose:To duplicate details from one drawing into another drawing without copying sheets from drawing to drawing.
This prevents changing the annotations of the original detail in files that have the same detail that someone may change.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
What is the code to create (or add) a new sheet in a drawing with iLogic?
View 1 Replies View RelatedHow can I create a sheet metal jog? Like the attached. I used a contor flange to creat this one, but I have to add a jog to an existing part and don't want to have to totally redraw it just to get the jog. I'm hoping you can add it like you can a flange.
View 9 Replies View RelatedI was wondering if a template used to create frames using the create frame tool in autocad civil 3D should have the same datum, projection as the files that are being referenced? Or is the template independent from from the reference files and does not need any datum, projection setting applied to it?
View 4 Replies View RelatedI am trying to create a new sheet in an existing excel file and can not figure out how to do it.
I am trying to export parts lists from multiple drawings to an exisitng excel spreadsheet and I'd like have each on their own sheet. I can do everything but create a sheet. How to do this in iLogic?
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I'm using the publish command to create a set of single-sheet Dwf files. After running publish the dot in my file names have been converted to the undercarage symbol.
example: (1111 - E1.0 sheet name - job number.dwf) this is converted to (1111 - E1_0 sheet name - job number.dwf)
If I do a manual dwf plot, file name does not change.
How to create this bend using the sheet metal mode. The bend should be a certain radius on the top (see attachments).
View 3 Replies View Related