AutoCAD Civil 3D :: Unable To Delete Output Parameter
Dec 13, 2013I added two output parameters in my custom SA. I no longer want them in there. But I can't find a way to delete them.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: How To Change Sequence Of Input / Output Parameter In Subassembly
Nov 28, 2013I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedAutoCAD Civil 3D :: Subassembly Composer 2013 - Change Order Of Input / Output Parameter
Sep 24, 2013Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
AutoCAD Inventor :: IV2012 Sp1 - Delete Unused Parameter Takes 4-5 Seconds Per Parameter
Dec 23, 2011I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
AutoCAD Civil 3D :: Unable To Edit Parameters In Corridor Section Parameter Editor
Nov 11, 2013Unable to edit parameters in Corridor Section Parameter Editor
View 4 Replies View RelatedAutoCAD Civil 3D :: Unable To Merge / Delete A Layer
Sep 24, 2013There's a layer in the drawing we received from the surveyor that doesn't match the client's standards. When I try to merge it with another layer or delete the layer, the command stops as soon as I pick a line on the layer. There are no objects visible on the layer so it may part of a style. I don't think it's part of a block as the surveyor used the client's blocks.
View 5 Replies View RelatedAutoCAD Civil 3D :: Unable To Delete Points From A Survey Database
Jan 2, 2014I am unable to delete points from my survey database. What could be preventing me from performing this task?
View 1 Replies View RelatedAutoCAD Civil 3D :: Unable To Delete Label Style Component
Jan 7, 2014Cannot delete label style component. This is for line annotation labels.
I created a child BRG-ONLY from a BRG-DIST and it will not allow me to delete the distance component. The red X is faded and not clickable.
This is my second day with a new company, and when somebody else created a similar child style apparently they could not either. The just made the distance component invisible... which I guess works almost as well.
How would I be able to pick a specific component to make sure I can delete it?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
AutoCAD Civil 3D :: Delete Key Doesn't Work / Unable To Edit Text
Mar 4, 2009I have to go up to cut and select the object to delete. Also when I click on text the edit dialogue box doesn't come up. I have to go to properties to edit.
View 9 Replies View RelatedAutoCAD Inventor :: Delete All Parameter In ILogic
Sep 27, 2012In 2009 Inventor iLogic, we have a button to delete all parameters and rules. But now, in 2013 Inventor iLogic, I only find a button to delete all rules. Where is the button to delete all parameters?
View 9 Replies View RelatedAutoCAD Inventor :: Delete User Parameter
Apr 22, 2013Most of the time, I delete an user parameter without problem. But, in a part, I got an error for two of them and I don't understand why. I create a new parameter and redirect all dependencies from the old one to the new. (oldParam.Dependencies.Count = 0).
But when I try to delete it, I've got an error. Also, when I try to delete it by the interface, I don't see the Delete option.
AutoCad 3D :: Unable To Create Output File
May 23, 2012Before rendering the program write:
make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.
AutoCAD 2013 :: Unable To Create Output File
Aug 27, 2013I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
AutoCAD Inventor :: Unable To Alter Linked Parameter In Assembly
Sep 12, 2012I have created a multi-value parameter in a part and exported it. I then linked it in the assembly but I am unable to edit it. I tried using iLogic but it also does not alter the part. Please see the attached 3 jpegs.
View 9 Replies View RelatedAutoCAD Architecture :: Rendering Message - Unable To Create Output File
Mar 17, 2011I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 Replies View RelatedAutoCAD 2010 :: Unable To Use Delete Key
May 21, 2012I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedVideoStudio :: Unable To Create Output Video (Share)
Mar 23, 2012I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
Illustrator :: Unable To Select Separations From Printer Output
Jul 21, 2013When I go to print and select output, the mode selection is locked and I am unable to select separations. Using CS6.
View 1 Replies View RelatedAutoCAD Inventor :: Unable To Delete Constraint
Jun 14, 2013How do you delete a constraint between a point and the center point of a line? (in the sketch environment)
View 2 Replies View RelatedAutoCad :: Unable To Delete Or Remove A Layer?
May 25, 2012In this particular drawing I have a layer I can see in my Layers Properties Manager but I cannot find in my drawing and it will not let me remove it.
this is a record of what I have just done:
Command: PURGE
Purged *D19.
Purged *D27.
Purged *D32.
Purged _None.
Command: *Cancel*
Command: <Switching to: 3D>
Regenerating layout.
Regenerating model - caching viewports.
[code]....
AutoCad :: Unable To Delete Viewpoints As It In Defpoints
Apr 4, 2011I use previous drawings to continue with new jobs.
so... I started to use defpoints as the layer for the the viewing window. This is so it doesn''t print out. However to make new sheets I copy and paste new sheets. The problem is I cannot delete the viewpoints as it in Defpoints and becomes invisible in Paper space. How can I delete one window?
Revit :: Unable To Share Shared Parameter Txt File?
Feb 4, 2013I have been making and sharing shared parameter files for years... For some reason today a co-worker's shared parameter file is invalid or could not be read...
We have run a couple of tests - I can create one on my computer and send to her without any issues... Any that she creates and sends to me - is invalid... WHY?
AutoCAD 2013 :: Unable To Edit Text Or Delete Anything
Jul 4, 2012I am using 2013LT. It crushed yesterday. Today when I opened my drgs. I can not edit text, delete anything. I also have noticed that menu under right click does not have the same options as before ie. block edit is not there and so on. I have opened differend dwg ones that I wasn't working on when it crushed and the same thing happed.
I opened my drawings with 2012LT and everything works fine.
AutoCAD 2013 :: Unable To Delete Text Style
Jul 1, 2013I`m working on this architecture project and copied some clean lines to the file from a landscape design project.
Somehow these text styles showed up to my file (more than 50 text styles from xrefs, because of their strange names, even though I don`t have any attachment). And it says that I cannot delete them cause I`m using it.
I`ve tried out everything I could imagine and read about it. It doesn`t work. Now this simple .dwg file is very heavy and with a lot of unwanted text styles. Even if I try to copy just the lines to start over another file, all the text styles go together.
Tried:
PURGE
AUDIT
RECOVER
WBLOCK
TXTMRG (not sure how to use it)
QTEXTMODE
Attached is one of the files that this happened to. As I`m working with a few attachments this happened to all of it. My default text style are "B3_1.5", "B3_2.0" and "B3_3.0". All the other are unwanted text styles.
AutoCAD 2013 :: Unable To Delete Hidden Objects
Nov 19, 2012We are using AutoCAD 2013 and our client is using Mechanical Desktop 2009 ,problem we are facing is that we are unable to see the object which they see in the same drawing by giving visible command. These unwanted objects remains even after purging the drawing and we are unable to delete at our end as we cannot see them because there is no such command like visible in AutoCAD.
View 5 Replies View RelatedAutoCAD 2010 :: Unable To Delete By Using Backspace On Keyboard
Nov 24, 2011I just downloaded AutoCAD 2012 on my imac running on my Parallels system, meaning I have the Windows version or AutoCAD 2012 running on parallels. (Because there are too many problems with AutoCAD for mac).
There is one problem however, I cannot delete by using 'backspace' on my mac keyboard. I always have to right click the selected object and go to erase. Does there exist a keyboard shortcut for erase?
AutoCAD Civil 3D :: XSL Files - Output In PDF
May 12, 2011I'm using the pointlist.xsl file and outputting in pdf.
I would like to modified the file with the following changes.
1. increase the left margin, now it seen to be 0.
2. add page breaks, it seem to be one long page.
3. add a header on each page (nu n e elev desc).
4. add page numbers.
5. have the client information fill-in using sheet set manager.
Is this possible, and where do you find information on wrighting XSL files.
AutoCAD 2010 :: Unable To Delete / Move Or Select Viewport
Aug 13, 2013Something that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 Replies View RelatedAutoCAD Inventor :: Unable To Delete Sick Sketch Reference
Feb 21, 2012I have a sketch reference that is giving a cross part failure error. I am unable to select the reference in the browser so I cant delete it or update it.
How to get rid of it. Deleting the sketch and starting again will be a disaster.
Using 2011SP2 XP64.
AutoCAD 2010 :: Unable To Insert Or Delete Rows In Table
Apr 2, 2010I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedAutoCad :: Unable To Delete Viewport Frame To Make Custom One
Sep 20, 2012I am having issues with creating viewports in the attached file. When I open the layout, say layout 3, it shows the viewport frame but I cannot highlight it in order to delete it. This is a setting in this file I have inadvertently turned on or off. I have created a new file, done a scribble, opened a layout and deleted the viewport.
View 9 Replies View Related