AutoCAD Civil 3D :: XSL Files - Output In PDF

May 12, 2011

I'm using the pointlist.xsl file and outputting in pdf.

I would like to modified the file with the following changes.

1. increase the left margin, now it seen to be 0.
2. add page breaks, it seem to be one long page.
3. add a header on each page (nu n e elev desc).
4. add page numbers.
5. have the client information fill-in using sheet set manager.

Is this possible, and where do you find information on wrighting XSL files.

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Output Surfaces As XML Files

Oct 26, 2012

I need to export a DTM for use in another package which I previously did by Extracting the Triangles, Selecting the 3D faces & Wblocking to DXF for import to the other package.

The developers of the other package have introduced an XML import which I have been trying out but when the surface is imported into the other package via XML most (but not all) of the triangles honour the original 3D faces.

The question is therefore: Does the XML output contain sufficient information to allow the other package to "join the dots" in the correct way so as to mirror the original 3D faces and thus create an exact copy of the DTM??

IDSP Premium 2014 (mainly Civil 3D 2014)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 3 Replies View Related

AutoCAD Civil 3D :: Stage Storage Output

Dec 5, 2013

A way to edit the Stage Storage table output? I'm trying to figure out a way to have the table output default to acre-feet in lieu of cubic-feet as well as omit some of the cells that are generated by default.

View 2 Replies View Related

AutoCAD Civil 3D :: Customizing Road Profile Output

Feb 27, 2013

I am new to Civil 3D and need to customise the look of road profiles so they look like they were produced from any of our other civil design software packages that we use (to maintain standards between offices etc).

The attached picture is what I need them to look like. I want to show both the natural ground (the dotted line) and the design road line (solid). Then I want to write on the profile the station, natural level and the design level.

I've got the Mastering Civil 3D book (and a few others) sitting on my desk.I worked out how to turn off the grid on the default profile althoguh that was about it.

View 1 Replies View Related

AutoCAD Civil 3D :: Reducing XML File Size Output

Aug 27, 2013

I am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.

Lidar information that I am using to create surface can be found at URL.....

View 4 Replies View Related

AutoCAD Civil 3D :: Unable To Delete Output Parameter

Dec 13, 2013

I added two output parameters in my custom SA.  I no longer want them in there.  But I can't find a way to delete them. 

View 2 Replies View Related

AutoCAD Civil 3D :: How To Change Sequence Of Input / Output Parameter In Subassembly

Nov 28, 2013

I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.

View 2 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer 2013 - Change Order Of Input / Output Parameter

Sep 24, 2013

Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?

I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.

View 3 Replies View Related

3ds Max :: Render Element Output Files - Format And Name

Aug 31, 2011

Sometime with some scenes, I have this trouble :

-when I render my beauty pass in TIF 16bits with render elements and when I leave MAX set my render-elements output files automatically, MAX use the initial name of the output beauty pass. So technically, It is suppose to make a couple of file with the same format and the same name.
-ok, I presse render to Backburner and I wait.
-Now my render is done, I go check my output files. And, sometimes, without constancy, my beauty pass is a TIF 16bits but my passes are in gray-scale or in 8bits or 16bits in random.

If I restart the job on Backburner, maybe it fix this problem, maybe not.

The unique thing I find to fix that is to set all my passes manually. but it's a pretty heavy process.

View 2 Replies View Related

GIMP :: Not Opening Own Output (JPEG Files)

Jun 2, 2011

GIMP 2.6.10-1 on Debian 6 does not open JPEG files recently written by itself. The program freezes and the only way out is to reboot. Older JPEG files are opened as usual, and the problem files can be opened in Digikam and Fotoxx. A sample problem file is attached.

View 14 Replies View Related

Photoshop :: Using Scripts / Image Processor To Output Png Files?

Aug 27, 2012

I need to resize a batch of pngs and would like to use scripts/image processor. My original files are png files. There appears to be no option for outputting pngs -but i must output the files as tranparent pngs.
 
I'm using ps cs6 on mac os 10.6.8.

View 15 Replies View Related

Photoshop :: How To Set Output To ProPhoto RGB And 16 Bit TIFF When Converting RAW Files In ACR

Aug 13, 2013

How to set output to ProPhoto RGB and 16 bit Tiff when converting RAW files in ACR? Using PS6.

View 3 Replies View Related

Lightroom :: 4.1 - Export Raw Files / Set Output Sizing To Megapixel

May 30, 2012

When exporting a raw file to tif I set the output sizing to megapixel. When I did it to 58 megapixel at 300dpi it gave me a 165mb file size To get a 58mb file I had to go back and forth to find the setting should be 20 megapixels.

View 1 Replies View Related

AutoCAD Civil 3D :: Files Range From TMP Files To Texture Folders

Feb 5, 2013

Deleting temp files, if I can just do a blanket Erase, or will this potentially damage autocad drawings.  My temp file is on my local drive, but all of our drawings are stored on a network drive.  It seems to me I remember these things storing up over time with crashes, etc.  But as they build up performance seems to dwindle.

These files range from .tmp files to Texture folders, .cvr files, and nonsense names like A$C5DCD5F31.Can I just window and Delete All?

View 4 Replies View Related

Lightroom :: Output In SRGB Color Space The Resulting Files Have Adobe RGB Color Space

Mar 1, 2013

When I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.

View 21 Replies View Related

AutoCAD Civil 3D :: Importing DGN Files

Apr 22, 2013

I am using different functions in Civil 3D 2012 in order to import DGN files.

Open->DGN
MapImport->DGN
Import->DGN

Everytiome I receive "0 object(s) inserted in 0 sec(s)".

Obviously importing is not working! Am I missing some object enabler or is a system variable incorrect?

View 3 Replies View Related

AutoCAD Civil 3D :: Bad Template - LNK Files

May 1, 2012

When I do file new in 2012,  I get the following message:

"the following shorcuts in the search were invalid & ignored ...\..PROFILE-2008.DWT.LNK

Profile.dwt.lnk.

How did these old LDD dwt get into my 3d template and how do I get them out?

View 1 Replies View Related

AutoCAD Civil 3D :: GIS Data - SHP And MDB Files

Apr 1, 2013

I've been given GIS data from a county and trying to design a water line using it.  I have the .shp files for all the structures, roads, addresses, parcels, etc. bu the utilties are in a .mdb file.  How do I use the .mdb to show the line work for the existing water line. 

View 3 Replies View Related

AutoCAD Civil 3D :: Step Or STP Files

Apr 29, 2012

I am trying to insert some valves into my drawing and they have been provided in *.stp or step format by the manufacturer. You can import them to civil 3d using IMPORT, but in Civil 3d the import dialogue does not have step files as an option under the file type drop down.

I am running Civil 3d 2012, and I am unable to install any software for a conversion due to our software restriction policies.

View 4 Replies View Related

AutoCAD Civil 3D :: JOB To FBK Files / Trimble

Feb 18, 2013

I am looking for something to convert .job files to .fbk files.  I have Trimble business center and AutoCAD C3D 2013.

 I haven’t got them to work together yet. I am trying to upgrade from Trimble geo office, which makes perfect field book files but it won’t work on my new computer.

Trimble says TGO is obsolete and that it just doesn’t work on new computers but I can't see why not..

View 2 Replies View Related

AutoCAD Civil 3D :: Exporting SHP Files

Feb 22, 2010

When I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.

View 5 Replies View Related

AutoCAD Civil 3D :: Log Of Imported Files

Oct 30, 2012

if there is a log or register of files that have been imported into a drawing. I'm currently importing landxml files alot and sometimes would like to confirm which files were imported. I can start my own register but wondered if c3d is doing it already?

View 2 Replies View Related

AutoCAD Civil 3D :: DWG Files Are Disappearing?

Jun 19, 2013

We are using C3D 2013 and have recently had 3 different episodes where a dwg file was open and being worked in, CAD shut down without warning and the drawing was lost. As in, it's gone. No longer on the network anywhere. These were 3 different drawings in different projects.The drawings were not new, they had been previously created and worked in by more than one user. We were able to find a backup file and did not lose everything but still thinking there has to be something causing this. The machine is a Dell Precision T5600, 16 GB of RAM, only had it for a few months.

View 9 Replies View Related

AutoCAD Civil 3D :: Importing SHP Files

Feb 15, 2013

I am trying to import a SHP file to obtain a surface. The imported data come in a polyline.

The data containt x and y as well as elevation. But, when I use the command

" mapimport " , the imported data only have 4 elevation ( 1,2,3 and 4). This is rather unexpected because the line represent the topography of a large area. 

I am working under Civil-3D 2013. The original data are okay, they were exported from GIS and they works fine on this station.

View 9 Replies View Related

AutoCAD Civil 3D :: Source For DEM Files

Jan 26, 2013

Any good source for DEM files?  Geocomm has STDS DEM's but last time I tried them they looked like junk. I can't seem to find the layer on the national map server or earth explorer.

View 4 Replies View Related

AutoCAD Civil 3D :: Projection Between Two Files

Aug 9, 2012

I just ran into a projection issue with a couple of AutoCAD files. There is a possibility that one of the files was originally in Microstation and in meters before it was converted to AutoCAD but I'm still trying to confirm this now.  The problem that I am running into is that AutoCAD Map doesn't allow you to xref or attach other CAD files and use  different projections. I have one file in Maryland State Plane, Feet and a second one which appears to be in Meters and I can't get them to overlay or for the file in meters to come in at the right location when it is xrefed.

View 7 Replies View Related

AutoCad :: No Annotations In PDF Output?

Oct 24, 2011

I am trying to make a PDF file out of a Layout to accompany the DXF files to a client, but when I create the file, all the annotation is missing. I have created such PDF's in the past and they worked fine, so Im scratching my head as to why it doesnt work now

I have attached the files so that this can be seen.

View 3 Replies View Related

AutoCad :: PDF Output Using PUBLISH

Jun 14, 2011

When you PUBLISH to PDF, is there an option to not have the filename before each Layout tab? I get tired of renaming files when I'm doing a quick job that doesn't require use of the SSM. When I publish using the SSM it works fantastic but not if you simply initiate the PUBLISH dialog box via the command line.

View 9 Replies View Related

AutoCAD Civil 3D :: How To Vectorize Native PDF Files

Nov 3, 2012

Is it possible to vectorize native PDF files within the AutoCAD 2013 environment. If yes how? Sample PDF file attached.

View 4 Replies View Related

AutoCAD Civil 3D :: Which Files To Copy When Working In LDD

Jul 16, 2012

I have created some new commands (that basically reference some lisp routines we have on our network) and would now like to copy these files to our other users...I knew which files to copy when we were working in LDD (the .mns files) but what files I need to copy to the other users PC's...the new commands all work and they are all in the quick access toolbar..

View 1 Replies View Related

AutoCAD Civil 3D :: Importing WinDes Files

Oct 4, 2012

Trying to import a Windes file into C3D using Microdrainage WinDes Link (import from file) under Toolbox in the UK & Ireland reports section... but coming up with an unhandled exception error each time. Is the only way to go about it or can you import it via another means i.e under the import tab??

what the best way to import a windes file into C3D?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved