I have created some new commands (that basically reference some lisp routines we have on our network) and would now like to copy these files to our other users...I knew which files to copy when we were working in LDD (the .mns files) but what files I need to copy to the other users PC's...the new commands all work and they are all in the quick access toolbar..
View 1 RepliesI am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View RelatedI'm currently doing some testing of 2014 SP1 and noticed the Copy Styles routine when creating Plan Production Sheets doesn't seem to function as it did in 2012?
Using 2014 SP1, I data referenced a Pipe Network into a Plan Prod. sheet that was created before the Pipe networks were created. After data referencing the first Pipe Network into the plan sheet, I tried to label my pipes and structures, noticed none of our custom styles got copied (during create sheets command) into the sheet?
In 2012 they did.We have a lot of these Plan Production dwt's here and it's going to be a major PITA if all Plan Production.dwt's will need to have all Styles within them.
The nice thing about the way it used to work is the styles only needed to be maintained in a couple base.dwt's.
In addition to these Pipe & Structure label styles missing the list goes on throughout the Settings tab. Only present styles seem to be of "in use" nature such as pfl style, Alignment style, pfl view style etc. where the sheet creation process pulled specific information into the sheet dwg from source dwg.
Also did a quick test of our 2012 configuration and majority of , if not all, styles from source dwt do get copied over eliminating the need for them within the Plan Production dwt's. 2012 SP3 used here.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I'm new to working with GIS data imported into Civil 3d as shape files. I'm working on setting up base drawings for a new project area and I have a lot of data displayed as polygons with attributes. This is nice but I would like to be able to copy these to polylines on layers that I can have a little more freedom to work with.
For example the polygon boundaries are not exactly the boundaries that I need to show and editing the borders would be nice. Is there a better alternative to tracing the polygon boundaries? I have noticed when I extract feature geometry for line strings I get a polyIine I can use but the polygons' extracted geometry is a Mpolygon with solid fill.
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies View RelatedWithin drawing and between drawing copy with basepoint and paste is not working anymore.
View 9 Replies View RelatedStill getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
I regularly use CTL-C & CTL-V to move objects from one drawing to another. That is I used to but now it's broken. When I select objects and use CTL-C, the command line says "_copyclip x found" (where "x" is the number of objects). I then go to another drawing and use CTL-V whereupon the command line says "_pasteclip" but I get no opportunity to select a base point and nothing more happens. I found a string describing this exact problem and a member suggested a "HotFix" of file "acdb17.dll" I searched my ACAD install folder and found no such file. I searched the entire hard drive and didn't find it. I put the supposed magic file in my ACAD folder (along with all the other dll files), re-started AutoCAD and still I can't use windows copy and paste. These commands work as expected in all other programs, just not Auto CAD. It's not that I'm married to the clipboard but I really need to move objects from one drawing to another. I also tried first saving all objects as a block but that didn't work. I've read where this problem exists in 2007 but I used to use 2007 with no problem. I'm on 2002 now and it used to work on that too.
View 4 Replies View RelatedWhen I use the copy tool, not copy and paste, the object that I copy doesn't show up. I click on an object click the copy took then click in the location where I want the new object, nothing shows up. Then if I save the drawing, close and reopen it, the object will be show up in the new location. It sometimes happens with move and rotate. I'm using 2013 64 bit version on Windows 7.
View 2 Replies View RelatedI recently installed Inventor 2014. With Inventor 2013, I was able to do a Save Copy As on an IDW file to save it as either a DXF file or AutoCAD DWG file without any issues. In Inventor 2014, doing this produces the following dialog boxes in succession:
No DXF or DWG is produced. I tried doing this to a new, blank drawing from one of the default IDW templates and I get the same result. What can I do to fix this?
A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies View RelatedWhen I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
I am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
"save copy as" is no longer working as is "save as", what happened?
View 7 Replies View RelatedI have a macro that i have been using in autocad 2012 for a simple copy & rotate command as follows
^C^C_select;auto;\_copy;p;;0,0;0,0;_move;p;;\_rotate;p;;\redraw
For some reason it now does not work in 2013 the macro exits after the copy part of the macro is finished & fails to let you rotate the copied object.
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
All of a sudden I am not able to copy and paste. I am trying to copy a vector outlined image from one illustrator file to another. I have used both my short cut keys and the edit tab. I tried closing out and starting on a new document, but nothing. I don't know if I accidentally changed an important setting or what?
View 2 Replies View RelatedI'm trying to copy plot files to a plotter with filecopy(plotfile,\serverplottername) it works fine when I have the UNC address but there are network printers without this address that I need to copy files too. I have the IP addresses of these printers.Is there a way to send a file to an IP address?
View 9 Replies View RelatedI've been using Photoshop CC since march and this is a new issue. Not previously a problem until today.
When I select and area to copy, from a JPEG or photoshop PSD photograph, and make a new file to paste it into, the new file comes up the same size as the clipboard contents, as it is meant too, but photoshop will no longer allow me to paste. The selection EDIT, Paste is still there in black, not greyed out. I temporarily fixed it by restarting my computer and it worked until I closed Photoshop down again and reopened it, problem is back...what is going on?
Is it to do with preferences and how do I change them to fix this?
the only thing I've changed recently was telling JPEG files to use photoshop as the default programme to open up in my computer. I changed this because Bridge was no longer showing photoshop as an option when you rightclick an image and chose which file to use to open it. The fix was to close Bridge, chose a jpeg and change the default to photoshop to open it.
I'm running windows 7 home premium 64 bit.
How can I transfer .dwg files from my old computer (Vista OS) to a new computer (Windows 7) and not have them transfer as "read only"? I have copied the existing files from the old computer to a flash drive and then transfered them using the flash drive to the new computer. They open but as read only. I have tried transfering each folder individually and the files still open as "read only". I have checked the properties on the files and they are identical to those on the original computer and the flash drive. Yet when they transfer to the new computer they come in as read only. I have turned off the "read only" and asked it to override the read only file but as soon as I close and open the .dwg it is still read only. how to make these files active on my new computer?
View 1 Replies View RelatedThis bug is still an issue, even with the latest update (16.2.0.998). Is there any a chance of a fix before the next update?
View 6 Replies View RelatedI use to be able to edit a copy with lightroom adjustments when I sent my photo to CS5. It is no longer working. how can I recover that function?
View 1 Replies View RelatedRecently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies View RelatedIn some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies View RelatedI have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
I did a sketch in an idw that is not attached to any view. I wan't to copy it somehow to another idw. But when I right click, copy and/or paste are not available for me to complete to process.
I tried creating a symbol using my already made sketch since those are easier to copy/paste between files. But I don't know how to proceed without recreating my sketch.
When I upgraded to Autocad (ACA) 2010 I migrated toolbars, etc. from ACA 2009. I am looking at getting a new computer and would like to know if I can just copy one of the CUIX files onto the new system and have everything work just as it does now. Is this possible, and which of the many CUIX files do I copy? Do I need to also copy the MNU, MNR and MNX files?
I’ve searched the CUIX files but can tell from the dates which are the newest.
All of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.