When I click on mtext to edit info the text editor comes up but it always lands right on top of the text so I have to keep moving the toolbar around... besides turning the option "off" for the toolbar to pop up - is there a way to "dock" it somewhere?
View 2 RepliesI know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedI just realized that I have quite a number of text instances (261!) that require that I change the color of the text. All of these instances are associated with multileaders and but are only a portion of the text associated with each multileader.
View 6 Replies View RelatedI am working with tables that are linked to data from an excel file.After I create a table I dettach it from the excel file. I do not want the excel file to control the table.
I then need to update the text format of all the text in the table. I've noticed that the text strings are still formatted based on how the excel file was formatted.
The only way to remove this is to click on the cell, highlight the text, right click, and then select Remove Character Formatting. Unfortunately I have to do this for each text string.
Is there a way to remove the character formatting for all of the text strings at once?
Even better, is there a way to format the table so that it does not change the text style based on what is in the excel file but instead based on AutoCAD's text styles?
Problem: Create a dynamic block with visibility, use a Multiline Attributes for text entry in to the block. I create multiple lines of text when editing the block in model space. Either with gripping the txt window width or use "Enter" to define multiple lines.... I proceed to edit the block slightly and when I close and save changes......All ML Attributes default to single line text. In turn i have to re-edit all my text.
Bugs like this are extremely painful. No rhyme or reason to them... Looking for a workaround other than using separate attributes for each line of text.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I've got an OLE work document spec that is 2 pages formatted correctly in MS word. When i link in the second page the formatting resets to the beginning in the .dwg file, but is retaining it's correct format in the linked word document. For example the 2nd page in the word doc starts at 2.9.....but is displaying 1.1 in the dwg file....is there a command to stop the reset of 1.1?
View 2 Replies View RelatedI am currently making a pattern of numbers. These numbers are going to be serial numbers on some parts that are to be cut by a waterjet. There are 1000 parts so I want to automate this process. I have made a pattern of text so that the text is placed correctly. Also i have used TCOUNT to automate the numbers, so that the pattern of numbers is now 1 2 3 4, etc (positioned correctly). The problem is that the serial numbers should have the format 00000 (5 digits), so: 00001, 00002 etc. Is it any way to make numbers appear this way? If i try write it like this in TCOUNT it automatically changes it to standard numbers.
View 2 Replies View RelatedI have linked a table from excel into autocad 2012. I have selected "Start with excel formatting, do not update" in the datalink options. My problem is when I break the table the first table will keep my formatting changes - text height and alignment, but the following table breaks do not stay the same once I close and reopen the drawing
View 1 Replies View RelatedI like the concept of datalinks, it's ingenious working with excel and do what excel does best instead of doing it in acad. I am done with the excel part and want to edit my table in autocad.
My problem is that I have some unused rows and columns that I can't get rid of, erase is greyed out.
I created a table with a title, 3 columns each with their own header and 20 rows of data. I then adjusted the properties of the table to allow breaks and repeated top labels. My Table Break properties are:
Enabled: Yes
Direction: Down
Repeat top labels: Yes
Repeat bottom labels: No
Manual Positions: No
Manual heights: Yes
Break height: 2.5
Spacing: 1
Everything looks great! I like the way the table is now broken into several smaller "tables"/sections (about 3 rows per section). BUT my question is: Is there a way to simply change the title text of these smaller "tables"/sections so each break has its own unique text for its title? The repeat top labels property only allows the overall title to be repeated with the same text. Any changes I make to the title text is carried through all titles of these individual sections.
I recently decided to see how the AutoCAD tables work. I was very happy to learn you could link your Excel spreadsheets with CAD. But now I have a problem.
After inserting the table it refuses to use the table style I have set up. The fonts do not want to change at all. I can change the colour of the text, but not the font.
PS: Using AutoCAD 2011
I've created a data link, linked to my autocad drawing, checked the box to keep excel formatting and update. Once i Import the table, the size of the table is NOTHING like what the size is in excel.
I have my page layout in excel to be 11 x 17 landscape. I have my table at about 9 1/4 x 15 landscape. Once I import it into autocad, it is now about 6 3/8 x 20 1/4. I don't know what i'm doing wrong but i need it to transfer just like it is in excel as far as the size of it.
I have an IDW file that has a corresponding .IPT Everytime you import a .ipt onto a sheet, a text accompanies it. I want to write a macros to edit this text.
As an usual practise it gives "VIEW, DESCRIPTION and SCALE" .
Instead of VIEW , I want the code to pick something from the i-properties.
Eg. Instead of VIEW, it shopuld write the STOCK NUMBER from the iproperties of the part.
Is this possible ?
when I double click on a text, a text formatting dialog box use to appear, but now it does not.
View 2 Replies View RelatedI'm trying to automate an email we have to send upon job completion, I've started with the Curtis's ilogic from . I also found info HERE. I'm almost there, but I can't seem to find the correct format to edit the text size/Font/Bolding required. The email should look like:
CRITICAL ACTION: Replace old revisions on the shop floor & at vendor with the new revisions and destroy the old revisions.
WORK ORDER #: XXXXX/X Customer / Description
DESCRIPTION OF CHANGES:
This e-mail is to inform you that the drawing(s) listed below are approved:
Drawing/Part Number
Rev
Description
Status
HIGH
Status / Required Action:
LOW / No active quote(s) or current need. (To: )
MED / Need to quote or generate purchase order. (To: )
HIGH / There is a work order in Progress. Destroy all copies of obsolete drawings and replace with latest revision. (To: )
SALES / This is a sales drawing. (To: )
All drawing files referenced in this e-mail have been loaded onto network folder:
\ServerengineeringCOMMONParts Folder RELEASED PDFs
Current Ilogic:
modelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)Dim oOApp Dim oOMailoOApp = CreateObject("Outlook.Application")oOMail = oOApp.CreateItem(olMailItem)Dim oWorkOrder As StringDim oCustomer As StringDim [code]......
I'm trying to get there by declaring Fontsize, then .Body.Fontsize = 16, but that isn't working. Any link to a page that would give me the correct format to change font size for this? I'd also like to get the table lines around the drawing/Part Number, but that isn't critical.
Users of Excel will know that you can ask that software to automatically change the color of text depending on its value.
I wonder is this possible in AutoCAD ( Issue release 13 )
The task I have to process is that I have a survey full of spot levels. It would be great of there was a lisp or script or some other device that would change the colour of the spot levels depending on the numerical value of the number.
E.g. - all values less than 100.00 - turn blue
all values equal to or greater than 100.00 - turn yellow
I notice that whenever I plot with DWG to PDF.pc3 the filename for the PDF always comes out as:
(.dwg file name)-(paper space name).pdf
Is there any way to change the inputs for this? Let's say for example I wanted AutoCAD to automatically insert a timestamp at the end for me, so that the filename is always:
(.dwg file name)-(paper space name)-(date and time here).pdf
This would keep me better organized and also make it easier for my less computer savvy coworkers to go through old drawings and see changes between drawings. I know I could type it by hand every single time, but why do that if there's a way to have AutoCAD do it for me
The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedIs there a way to incorporate the functionality of acad mechanical whereby you can specify the length of text but have it fit within a specific area?
So far I haven't been able to figure out how to get a description to work well with my title block. If I use the fit option, all of the text is stretched, which I don't want. I want it to be normal until it doesn't fit anymore into the predefined area and then have it fit.
I was telling an engineer the other day that I could probably insert his general notes from MS Word into AutoCAD and create nice clean pdf files of the CD sheets that he could email to clients. On second inspection I could tell that, yes I could copy, paste it in, but fixing all the formatting would be a nightmare. Is there any way to retain the formatting such as numbering, tabs etc. when bringing it in to AutoCAD? The idea is to have it be an editable document, so I don't want to just bring it in as a OLE object, pdf or scan.
View 7 Replies View RelatedI'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies View Relatedtool bar doesnt appear
View 2 Replies View RelatedI was trying to duplicate the star wars scrolling into space text movie demo in PS CS4. I finally accomplished it.
But to adjust the text, it requires the FULL text format. I had the full format button in view, but could not use it. The only buttons that worked were left, center, and right. None of the buttons on the right would toggle.
I used the key shortcut CTRL-SHFT-F to get it to work.
I highlighted the text and nothing could move the focus to the FULL format button..
When I copy some text from one part of a layout to another, it retains the font settings of the original text. How can I have the text just be text and take on the format of the paragraph I'm pasting into?
For instance, I copy some words into a headline, I don't want them to be 12 pt Times, so I have to re-apply the formatting.
Currently I paste into an external text editor and copy again so that it is just text without formatting. Is there a way to do this in Illustrator?
I was recently upgraded from AutoCAD 2005 to AutoCAD 2012. I set my interface to AutoCAD Classic. When I check the Measurement Tools (toolbar) the ribbon appears, but I can not move the toolbar. I run two displays, so the the measure tool shows up on one all the time.
View 2 Replies View Relatedrecently i have installed autocad 2011 in my pc. but some toolbars are missing like layer,draw line,multiline,polyline rectangle ( which are the usual feature of classic autocad 2004 or 2007). how i will find the classic toolbars in autocad 2011.
View 8 Replies View RelatedI have 2 pcs in the office running 2012. 1 pc has a toolbar option that allows me to save/close the blockeditor along with other options but 1 have 1 pc in the office does not show this option. i have included a pic and boxed it in red.
View 2 Replies View RelatedThe icons are not visible in the toolbar. If I hover the cursor over the icon, the commands are active but no icons are visible.
View 2 Replies View Relatedmy toolbar that contain menu, insert etc is missing. what should i do?
View 3 Replies View RelatedThe icons on my osnap toolbar do not coincide with the commands.
View 7 Replies View Related