I was recently upgraded from AutoCAD 2005 to AutoCAD 2012. I set my interface to AutoCAD Classic. When I check the Measurement Tools (toolbar) the ribbon appears, but I can not move the toolbar. I run two displays, so the the measure tool shows up on one all the time.
View 2 Replies
I want to add the Measure (Distance) command to my quick access toolbar. When I right click on the Measure button the "Add to quick access toolbar" is grayed out in 2013.
Also why can't they make it so when I add something to the quick access toolbar stays added to all file types. I have to add it to .ipt, .iam, .dwg...
BTW Not real impressed with 2013 so far.
Using Inventor 2013
We use the snippets from iLogic on all of our parts to measure the length, width or height of our parts. However, we have noticed that when a 'Move Face' operation or a 'Replace Face' operation is used, the length measured does not seem to take into account the Move/Replace operations.
Are the Move/Replace operations different than other features like Extrude/Revolve? Is there something "ghost-like" about them??? The edges work fine on the drawing side, so I'm not sure what is different. Maybe it is the iLogic snippet?
In regards to it being the snippet, is there another code I can use that doesn't require specific feature or part information built in?
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
How to measure the indicated angle? I’m wondering why the AutoCAD can’t measure the angles indicated (magenta) in the screenshot below! The dwg file is attached
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
When I use the measure distance command, I have to exit out of the command before I move on to my next command. I'm used to measuring once and the command automatically exits (in previuos releases). Is there a variable that will exit the command after one measurement?
View 4 Replies View Relatedcan i view the 1:1 drawing as it on A3 without taking print out...i mean to say if i draw 100mm straight line can i measure with the scale on monitor.
View 2 Replies View RelatedFor once I have to place many asymetric objects uniformly with Alignment along a convex circular arc (2D). So I try Measure or Divide using my Block but it flips my Block so it is aligned with the inside of the curve (closest to the curve centre) not the outside and the blocks are turned upside down. If I draw an arc concave up it plots OK. If I draw a Spline (single curve or reverse curve (S curve) in my desired orientation, it also plots OK.
I have tried all combinations of UCS but to no avail. The block is not dynamic so there has not been any Alignment set.
I want to chose the better, to start drawing. I use inches at work, but I want to use international system for myself for personal projects
I think there is a standard unit in files imported o r exported from another soft, smaller files, easier size to process by pc, quicker units to introduce, accurate, prototyping models soft compatibility, etc.
Any previous criteria for recommendation is perfect.
¿Which is the best measure units to use?
Spoiler (Highlight to read)
there is a tool bar at the bottom of my screen (im in expert mode) which covers up my color options window. The toolbar includes "photo bin, tool options, undo/redo, rotate, layout and Organizer. I cant drag or move it anyhow.
View 1 Replies View RelatedEvery time I try to move a panel or toolbar the app freezes and I have to close, it worked fine in the beginning.
[URL]........
They seem to have the same problem as what I have. I do run as admin.
tool bar doesnt appear
View 2 Replies View Relatedrecently i have installed autocad 2011 in my pc. but some toolbars are missing like layer,draw line,multiline,polyline rectangle ( which are the usual feature of classic autocad 2004 or 2007). how i will find the classic toolbars in autocad 2011.
View 8 Replies View RelatedI have 2 pcs in the office running 2012. 1 pc has a toolbar option that allows me to save/close the blockeditor along with other options but 1 have 1 pc in the office does not show this option. i have included a pic and boxed it in red.
View 2 Replies View RelatedThe icons are not visible in the toolbar. If I hover the cursor over the icon, the commands are active but no icons are visible.
View 2 Replies View Relatedmy toolbar that contain menu, insert etc is missing. what should i do?
View 3 Replies View RelatedThe icons on my osnap toolbar do not coincide with the commands.
View 7 Replies View RelatedProblem: I need to be able to control the size of toolbars (ICON size) via the worspace.
More Details: There is a department in our company that has a very specific function they need to perform in our ACAD drawings.
I created ONE toolbar that has the commands they need and set this toolbar to be the only thing that is displayed in their workspace.
Since it is just one toolbar I thought it would be good for the tool bar to use the large icon setting. But I only need to it to change when when using this one workspace.Other workspaces need to use small icons.
Is there a way to control the icon sizes when switching between workspaces?
How do I create a new custom toolbar?
View 2 Replies View RelatedI am rying to modify a toolbar through the cui. When I try and drag and drop the command I want to add I get an error.
View 1 Replies View RelatedWhen I click on mtext to edit info the text editor comes up but it always lands right on top of the text so I have to keep moving the toolbar around... besides turning the option "off" for the toolbar to pop up - is there a way to "dock" it somewhere?
View 2 Replies View RelatedCAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedI added the Layer group (On / Off Freeze Lock / Unlock and Layer name) to the Quick Access Toolbar. I only see the first part name of the layer. Is there a way to stretch this part of the group in the QAT tool bar so I can see the more of the layer name? The partial name and layer color may be a sufficient clue as to the whole layer name over time. Would be nice to see the whole name until then.
View 1 Replies View RelatedI just had to rebuild a large toolbar after upgrading to Autocad 2011. I had to scroll through the old version's MNU file to locate and extract the information. Then I had to copy/paste the information from the text to the new toolbar. Luckily I had the Icon bitmaps saved and didn't have to recreate them.
Is there a way to export the code from a custom toolbar that can then be imported into another version or copy of Autocad?
How to change the color of the quick access toolbar? Mine is SO hard to see! This is on a Windows 7 64-bit OS.
View 5 Replies View RelatedI would like to add the layer state drop-down from the ribbon to one of my toolbars, but can't find it in CUI command list. Is this feature only available with the ribbon?
LT, C3D 2005 - 2014
XP, Vista, 7
I have a custom toolbar that I've used for years in an olderversion of CAD. Now I'm in 2012 and loaded my custom toolbar in from my previous CUI. Naturally it dropped in all question marks even though I have all paths in the support file added. I even copied all my bitmaps to autodesk's default bitmap location. Neither work.
So after that I went into the CUI and manually selected the bitmap image for "small image" and "large image". It shows in the CUI now, but no luck on the main board. (also, not that this matters, must be a glitch but it won't even show in the CUI until i manually select another bitmap and reselect my origional desired image)
So then I tried taking the whole path and copying it into the CUI manually but it goes right back to defaulting to (MYIMAGENAME.BMP) without keeping the extension. My other custom toolbars loaded with all the pictures but this one just refuses to cooperate.
Instance 1. I have lost the Quick Access Toolbar located above the ribbon to the of the right of the application menu button. I can no longer save a drawing and no longer undo or redo any commands that I need to edit while creating a drawing.
Instance 2. I created a drawing saved it and then later came back to it. Went to Veiw tab then clicked the Tile Vertically button. My drawing on one half of the screen and a blank one on the other half. I X out of the screen and started the drawing once again and the drawing area is now labled Drawing1.dwg with a blue square border around the drawing area. With no split screen. I would like to get back to the original drawing area without the blue border going around it titled Drawing1.dwg. I was trying to use the move command to get my drawing into the empty space next to it.
There is problem in auto cad 2011.When click Zoomtoolbar.All miginfing icon likes Zoom Scale,Zoom Center,Zoom Extents,.... how make visible this icon.
View 1 Replies View Relatedchange my existing customize classic toolbar to be ribbon type.. Though want to try out the ribbon type format with my current customize toolbar.
View 1 Replies View RelatedI'm running Acad 2012 on my personal computer...no network.
Last year I set up a new Design Center 2012 folder,that linked my DC toolbar icon, etc, containing my personal block set that I use in Design Center 2012. Everything worked great. Suddenly something has changed.
1. I previously removed the stock DC2012 folder and replaced the folder with a new folder titled Design Center 2012 folder containing my personal blocks, the new folder was placed it in the proper Autodesk file location and worked fine for a year,
When I now go to DC thru the toolbar icon it takes me to the stock DC folder blocks, which I physically can't find a trace of on my computer, but are obviously still on my hard drive somewhere.
2. There is no DC2012 folder which contains the stock blocks on my computer (I have them saved to another drive), only my personal blocks are in my new DC 2012 folder.
3. If drill down thru C drive properties to the AutoCad 2012 folder in Autodesk, my personal DC 2012 items are there and functioning fine if I click them directly.
So, how can I redirect the Acad DC toolbar icon, or whatever, to recognize my "real" (personal) DC 2012 folder w/my own blocks inside instead of the stock? It worked before.
