AutoCAD Architecture :: Text Formatting Box Missing
Jan 22, 2013when I double click on a text, a text formatting dialog box use to appear, but now it does not.
View 2 Replies
ADVERTISEMENT
AutoCAD Architecture :: Create Sheet Notes With Different Line / Paragraph Spacing - Text Formatting
May 22, 2012I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies View RelatedAutoCAD Architecture :: Missing Text Style Pull Down?
Sep 30, 2012I have ACA11 that we changed to classic on a computer.
We are missing the text style pulldown and dim style pulldowns.
Is there a code to get these back.
AutoCAD Architecture :: Missing Text When Opening Dwg 2006 In 2010?
May 24, 2011Our office upgraded to AutoCAD Architecture 2010 from 2006. Now when I open drawings some of the text disappears?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Changing Text Formatting Style Inside All Text Contents
Aug 4, 2013I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
AutoCAD 2010 :: Rotating Text From Text Formatting Toolbar?
Nov 1, 2012I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedAutoCAD Architecture :: Data Link Table Repeatedly Loses Formatting Upon Closing And Opening File
Mar 19, 2012I am repeatedly running into the same problem of a data linked table losing its formatting upon closing and opening the file.
Each time this happens, I am forced to enter the properties tab and return the height of the text and the height of the cell to the size that it had originally been. Is there an option that I have not seen? What is continuously causing this error?
AutoCAD Inventor :: Formatting Text Under Views Using VBA
Oct 21, 2013I have an IDW file that has a corresponding .IPT Everytime you import a .ipt onto a sheet, a text accompanies it. I want to write a macros to edit this text.
As an usual practise it gives "VIEW, DESCRIPTION and SCALE" .
Instead of VIEW , I want the code to pick something from the i-properties.
Eg. Instead of VIEW, it shopuld write the STOCK NUMBER from the iproperties of the part.
Is this possible ?
AutoCAD 2010 :: Text Formatting Toolbar
Apr 29, 2013When I click on mtext to edit info the text editor comes up but it always lands right on top of the text so I have to keep moving the toolbar around... besides turning the option "off" for the toolbar to pop up - is there a way to "dock" it somewhere?
View 2 Replies View RelatedAutoCAD Inventor :: Formatting Text For Email
Jun 10, 2013I'm trying to automate an email we have to send upon job completion, I've started with the Curtis's ilogic from . I also found info HERE. I'm almost there, but I can't seem to find the correct format to edit the text size/Font/Bolding required. The email should look like:
CRITICAL ACTION: Replace old revisions on the shop floor & at vendor with the new revisions and destroy the old revisions.
WORK ORDER #: XXXXX/X Customer / Description
DESCRIPTION OF CHANGES:
This e-mail is to inform you that the drawing(s) listed below are approved:
Drawing/Part Number
Rev
Description
Status
HIGH
Status / Required Action:
LOW / No active quote(s) or current need. (To: )
MED / Need to quote or generate purchase order. (To: )
HIGH / There is a work order in Progress. Destroy all copies of obsolete drawings and replace with latest revision. (To: )
SALES / This is a sales drawing. (To: )
All drawing files referenced in this e-mail have been loaded onto network folder:
\ServerengineeringCOMMONParts Folder RELEASED PDFs
Current Ilogic:
modelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)Dim oOApp Dim oOMailoOApp = CreateObject("Outlook.Application")oOMail = oOApp.CreateItem(olMailItem)Dim oWorkOrder As StringDim oCustomer As StringDim [code]......
I'm trying to get there by declaring Fontsize, then .Body.Fontsize = 16, but that isn't working. Any link to a page that would give me the correct format to change font size for this? I'd also like to get the table lines around the drawing/Part Number, but that isn't critical.
AutoCad :: Conditional Text Formatting Depending On Value
Apr 15, 2013Users of Excel will know that you can ask that software to automatically change the color of text depending on its value.
I wonder is this possible in AutoCAD ( Issue release 13 )
The task I have to process is that I have a survey full of spot levels. It would be great of there was a lisp or script or some other device that would change the colour of the spot levels depending on the numerical value of the number.
E.g. - all values less than 100.00 - turn blue
all values equal to or greater than 100.00 - turn yellow
CorelDRAW X3 :: No Prompt For Text Formatting Options While Pasting Text From MS Word?
Sep 25, 2013The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedAutoCAD 2010 :: Changing Text Formatting Via (find)?
Sep 6, 2013I just realized that I have quite a number of text instances (261!) that require that I change the color of the text. All of these instances are associated with multileaders and but are only a portion of the text associated with each multileader.
View 6 Replies View RelatedAutoCAD Inventor :: Text Formatting - Incorporate Functionality
Apr 4, 2013Is there a way to incorporate the functionality of acad mechanical whereby you can specify the length of text but have it fit within a specific area?
So far I haven't been able to figure out how to get a description to work well with my title block. If I use the fit option, all of the text is stretched, which I don't want. I want it to be normal until it doesn't fit anymore into the predefined area and then have it fit.
AutoCad :: Insert MS Word Text Without Losing Formatting?
Dec 7, 2011I was telling an engineer the other day that I could probably insert his general notes from MS Word into AutoCAD and create nice clean pdf files of the CD sheets that he could email to clients. On second inspection I could tell that, yes I could copy, paste it in, but fixing all the formatting would be a nightmare. Is there any way to retain the formatting such as numbering, tabs etc. when bringing it in to AutoCAD? The idea is to have it be an editable document, so I don't want to just bring it in as a OLE object, pdf or scan.
View 7 Replies View RelatedAutoCAD 2010 :: Remove Character Formatting For All Of Text Strings At Once?
Oct 30, 2012I am working with tables that are linked to data from an excel file.After I create a table I dettach it from the excel file. I do not want the excel file to control the table.
I then need to update the text format of all the text in the table. I've noticed that the text strings are still formatted based on how the excel file was formatted.
The only way to remove this is to click on the cell, highlight the text, right click, and then select Remove Character Formatting. Unfortunately I have to do this for each text string.
Is there a way to remove the character formatting for all of the text strings at once?
Even better, is there a way to format the table so that it does not change the text style based on what is in the excel file but instead based on AutoCAD's text styles?
AutoCAD 2010 :: Multiline Attributes Won't Hold Text Formatting After BLOCKEDIT / SAVE
Mar 20, 2012Problem: Create a dynamic block with visibility, use a Multiline Attributes for text entry in to the block. I create multiple lines of text when editing the block in model space. Either with gripping the txt window width or use "Enter" to define multiple lines.... I proceed to edit the block slightly and when I close and save changes......All ML Attributes default to single line text. In turn i have to re-edit all my text.
Bugs like this are extremely painful. No rhyme or reason to them... Looking for a workaround other than using separate attributes for each line of text.
Photoshop :: Text FULL Formatting
Mar 11, 2009I was trying to duplicate the star wars scrolling into space text movie demo in PS CS4. I finally accomplished it.
But to adjust the text, it requires the FULL text format. I had the full format button in view, but could not use it. The only buttons that worked were left, center, and right. None of the buttons on the right would toggle.
I used the key shortcut CTRL-SHFT-F to get it to work.
I highlighted the text and nothing could move the focus to the FULL format button..
Illustrator :: Paste Text Without Formatting?
May 12, 2013When I copy some text from one part of a layout to another, it retains the font settings of the original text. How can I have the text just be text and take on the format of the paragraph I'm pasting into?
For instance, I copy some words into a headline, I don't want them to be 12 pt Times, so I have to re-apply the formatting.
Currently I paste into an external text editor and copy again so that it is just text without formatting. Is there a way to do this in Illustrator?
Photoshop :: Pasted Text Retains Formatting
Oct 31, 2013When text is pasted from one CS5 document into another and is inserted into the existing text in the destination doc, is comes in as a size different from either the source or distination size. Both docs are of the same resolution. The text being transferred is acquiring new formatting somehow. These are older docs, I don’t know what I might have done with/to them previously.
View 2 Replies View RelatedPhotoshop :: Losing Formatting When Pasting Text In CS6
Aug 21, 2013I am trying to copy and paste text in Photoshop CS6 and I am losing the oh-so-valuable formatting. I am referring to two boxes side by side in Photoshop that contain text.
I love the text in the first box, but when I try to duplicate the formatting in the second box right next to it, the text looks completely different. And, when I try to just paste some of the text from the first box to the second box, the 20 px text suddenly becomes 96.3 px text.
Even though I go through all of the formatting options available and duplicate what was in the first box, the text in the second box ends up looking nothing like the first box even though they contain exactly the same formatting, font type - everything.
Revit :: Keep Formatting Stable In Text Editing?
Sep 8, 2011Revit 2011 text editing
How do I keep the formatting stable in the text editing. I have columns separated by tabs. Every time I click to edit the text Revit re-arranges the paragraph. I can't keep the format stable so the columns read correctly. I never had this problem with CAD.
I feel like a Beta tester right now trying to produce permit documents on a program that isn't finished yet.
Illustrator SDK :: Text Range Formatting Using HTML
Apr 15, 2013I am programmatically setting the text of selected text range from plugin. The text is obtained from external system. It is html formatted (ex: <b>bold</b> text and this is <i>italics</i>) . Is there a way to set the formatted text into text range? Currently it is showing the entire text including formatting tags as text.
View 3 Replies View RelatedPhotoshop :: Any Way To Copy / Paste Text Without Keeping Formatting
Sep 6, 2013Is there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
View 4 Replies View RelatedPhotoshop :: Copy / Paste Text In Illustrator CC Not Keep Formatting
Sep 4, 2013When I copied text over from Photoshop to illustrator it kept the text formatting. For example the font, font size, color. Now when I use CC and copy paste text from PS to AI, all text formatting is lost and everything is placed as whatever the current AI text setting is.
HOWEVER, pasting from AI to PS WORKS as it should. All font/text formatting is maintained. Is this a bug or is there a setting for this that I just never knew about?
CorelDRAW X3 :: How To Apply Formatting To Distinct Text Areas
Aug 27, 2010I have copied a bunch of text into a text frame in CorelDRAW X3. Now I want to give style to each of the headings in the text.
In Microsoft Word there is a "copy formatting" option, allowing me to copy font size, colour, style etc. from one text portion to other text portions in a snap.
Is the same possible with text in CorelDRAW?
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Photoshop :: Formatting Multiple Text Layers At One Time
Nov 29, 2004I am using Photoshop 7.0
Can I format multiple layers of text at one time?
Also, can I write in paragraph format - so lines get evenly spaced?
Photoshop :: Pasting Text From Word Program While Retaining Same Italics Formatting
Feb 18, 2013I'm looking for a way to be able to copy text from another program (Microsoft Word) and then, using the Text tool in Photoshop (CS6), paste that text, but where it retains the correct italics formatting I had in the other program--and not as an image of text (Ctrl+P), in which the formatting is present, as a flat image, but rather as an actual unpasteurized and editable Text layer.
For example, the sentence “I told you..” where 'told' is italics, simply pastes into Photoshop as "I told you.." without the original formatting. Is there a way to get Photoshop to recognize formatting from pastes without my having to manually re-apply the formatting myself? This would be a hassle over a long period of time. If necessary I would be willing to use a plug-in that allows for this sort of recognition.
CorelDRAW Graphics Suite X3 :: Text Frame Loses Formatting When Copied?
Mar 23, 2012the thing is that on my previous version of Corel Draw (9? 10? whatever...) I could take a text frame with tabs lined up, copy it, paste it into a new document and all the tabs would be carried over from the original.
but when I try to do that in X3, it just copies across as plain text, meaning that I would have to do all the tabbing again.
When I say the tabs were set up, it's a list that looks like this:
Bill.................32..................Harvard
John..............27..................Oxford
where the .............. is made just by tabbing across.
Illustrator :: How To Change All The Text Font Leaving Previous Letter Formatting
Jun 19, 2013How to change all the text font, leaving previous letter formatting? I mean leave Bold, Underline, Italic, e.t.c.
View 8 Replies View RelatedAutoCAD Inventor :: Hole Table Formatting - Different Text Depending On The Type Of Hole
Nov 6, 2012I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.