When text is pasted from one CS5 document into another and is inserted into the existing text in the destination doc, is comes in as a size different from either the source or distination size. Both docs are of the same resolution. The text being transferred is acquiring new formatting somehow. These are older docs, I don’t know what I might have done with/to them previously.
View 2 RepliesI have a detailed graph that is created in Excel that I want to paste into Illustrator so that I can save it as a high resolution TIFF file for submission to a journal.
In Excel the graph looks like this:
But when I select it (using Select Objects and then Copy OR Copy as picture) and paste it into Illustrator, it looks like this:
I have used different line formats in Excel for the different curves that are plotted and these obviously don't come through correctly when pasting into Illustrator. The lines are there but the scaling for the dashes or dots seems to be changed (increased). I'm good with Excel but a bit of an Illustrator newbie, why this is happening and can it be corrected.
I am on Win 7 64 bit system using Office 2010 and AI CS6
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm printing a document trying to get two out of each page. I imported text, formatted it within Indesign cs3 and not it's time to copy the block and paste it onto the right side of the page. But the pasted version had a .50 tab at the first word which does not exist on the original side. How do I fix this?
View 7 Replies View RelatedThe problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedI was trying to duplicate the star wars scrolling into space text movie demo in PS CS4. I finally accomplished it.
But to adjust the text, it requires the FULL text format. I had the full format button in view, but could not use it. The only buttons that worked were left, center, and right. None of the buttons on the right would toggle.
I used the key shortcut CTRL-SHFT-F to get it to work.
I highlighted the text and nothing could move the focus to the FULL format button..
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedI am trying to copy and paste text in Photoshop CS6 and I am losing the oh-so-valuable formatting. I am referring to two boxes side by side in Photoshop that contain text.
I love the text in the first box, but when I try to duplicate the formatting in the second box right next to it, the text looks completely different. And, when I try to just paste some of the text from the first box to the second box, the 20 px text suddenly becomes 96.3 px text.
Even though I go through all of the formatting options available and duplicate what was in the first box, the text in the second box ends up looking nothing like the first box even though they contain exactly the same formatting, font type - everything.
Is there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
View 4 Replies View RelatedWhen I copied text over from Photoshop to illustrator it kept the text formatting. For example the font, font size, color. Now when I use CC and copy paste text from PS to AI, all text formatting is lost and everything is placed as whatever the current AI text setting is.
HOWEVER, pasting from AI to PS WORKS as it should. All font/text formatting is maintained. Is this a bug or is there a setting for this that I just never knew about?
I am using Photoshop 7.0
Can I format multiple layers of text at one time?
Also, can I write in paragraph format - so lines get evenly spaced?
I'm looking for a way to be able to copy text from another program (Microsoft Word) and then, using the Text tool in Photoshop (CS6), paste that text, but where it retains the correct italics formatting I had in the other program--and not as an image of text (Ctrl+P), in which the formatting is present, as a flat image, but rather as an actual unpasteurized and editable Text layer.
For example, the sentence “I told you..” where 'told' is italics, simply pastes into Photoshop as "I told you.." without the original formatting. Is there a way to get Photoshop to recognize formatting from pastes without my having to manually re-apply the formatting myself? This would be a hassle over a long period of time. If necessary I would be willing to use a plug-in that allows for this sort of recognition.
When I copy some text from one part of a layout to another, it retains the font settings of the original text. How can I have the text just be text and take on the format of the paragraph I'm pasting into?
For instance, I copy some words into a headline, I don't want them to be 12 pt Times, so I have to re-apply the formatting.
Currently I paste into an external text editor and copy again so that it is just text without formatting. Is there a way to do this in Illustrator?
I have an IDW file that has a corresponding .IPT Everytime you import a .ipt onto a sheet, a text accompanies it. I want to write a macros to edit this text.
As an usual practise it gives "VIEW, DESCRIPTION and SCALE" .
Instead of VIEW , I want the code to pick something from the i-properties.
Eg. Instead of VIEW, it shopuld write the STOCK NUMBER from the iproperties of the part.
Is this possible ?
Revit 2011 text editing
How do I keep the formatting stable in the text editing. I have columns separated by tabs. Every time I click to edit the text Revit re-arranges the paragraph. I can't keep the format stable so the columns read correctly. I never had this problem with CAD.
I feel like a Beta tester right now trying to produce permit documents on a program that isn't finished yet.
when I double click on a text, a text formatting dialog box use to appear, but now it does not.
View 2 Replies View RelatedWhen I click on mtext to edit info the text editor comes up but it always lands right on top of the text so I have to keep moving the toolbar around... besides turning the option "off" for the toolbar to pop up - is there a way to "dock" it somewhere?
View 2 Replies View RelatedI'm trying to automate an email we have to send upon job completion, I've started with the Curtis's ilogic from . I also found info HERE. I'm almost there, but I can't seem to find the correct format to edit the text size/Font/Bolding required. The email should look like:
CRITICAL ACTION: Replace old revisions on the shop floor & at vendor with the new revisions and destroy the old revisions.
WORK ORDER #: XXXXX/X Customer / Description
DESCRIPTION OF CHANGES:
This e-mail is to inform you that the drawing(s) listed below are approved:
Drawing/Part Number
Rev
Description
Status
HIGH
Status / Required Action:
LOW / No active quote(s) or current need. (To: )
MED / Need to quote or generate purchase order. (To: )
HIGH / There is a work order in Progress. Destroy all copies of obsolete drawings and replace with latest revision. (To: )
SALES / This is a sales drawing. (To: )
All drawing files referenced in this e-mail have been loaded onto network folder:
\ServerengineeringCOMMONParts Folder RELEASED PDFs
Current Ilogic:
modelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)Dim oOApp Dim oOMailoOApp = CreateObject("Outlook.Application")oOMail = oOApp.CreateItem(olMailItem)Dim oWorkOrder As StringDim oCustomer As StringDim [code]......
I'm trying to get there by declaring Fontsize, then .Body.Fontsize = 16, but that isn't working. Any link to a page that would give me the correct format to change font size for this? I'd also like to get the table lines around the drawing/Part Number, but that isn't critical.
Users of Excel will know that you can ask that software to automatically change the color of text depending on its value.
I wonder is this possible in AutoCAD ( Issue release 13 )
The task I have to process is that I have a survey full of spot levels. It would be great of there was a lisp or script or some other device that would change the colour of the spot levels depending on the numerical value of the number.
E.g. - all values less than 100.00 - turn blue
all values equal to or greater than 100.00 - turn yellow
I am programmatically setting the text of selected text range from plugin. The text is obtained from external system. It is html formatted (ex: <b>bold</b> text and this is <i>italics</i>) . Is there a way to set the formatted text into text range? Currently it is showing the entire text including formatting tags as text.
View 3 Replies View RelatedI'm transferring a 1st draft book from a PDF file by copying and pasting text and photos. So far, so good.
During the pasting process, I've selected to maintain fonts and formatting. Despite this, the text gets pasted with only some of the formatting and some correct fonts. But that's easily fixable.
All the text, now in X4, is Left Justified. The author has requested that it be Full Justified (looks better). When I select a paragraph and Full Justify it, the words/lines shrink further to the left. Altering the Spacing from the default 60% to 100% allows it move to the right, but not all the way to the right of the text box.
I've tried hyphenation. Still, there's a limit to how far right the text is allowed to go.Force Justify stretches it all out fine, but the spaces are too big between the words.
I made a new text box and typed in the same content that's in a paragraph of the pasted text. It Fully Justifies perfectly!
So, there seems to be some invisible 'barrier' within the pasted text stopping the Full Justify process from working properly.
One of our standard practices is to copy/ paste schedules from EXCEL into CAD. The OLE objects paste with the text color set to whatever was set up in EXCEL. But for one user , his text always changes to blue in the copy paste process. We cannot figure out how to change it to match everyone elses. Is this a CAD setting or EXCEL setting.
View 4 Replies View RelatedI created some tables in the attached AutoCAD Map 3D 2011 drawing by copying and pasting cells from an Excel 2007 workbook.
I have been able to update the tables in AutoCAD and print without any problems. However, when a second user opened the drawing, the table text was missing (the lines were present).
Note: We are saving our files in AutoCAD 2010 format for compatibility with some LT users.
I have copied a bunch of text into a text frame in CorelDRAW X3. Now I want to give style to each of the headings in the text.
In Microsoft Word there is a "copy formatting" option, allowing me to copy font size, colour, style etc. from one text portion to other text portions in a snap.
Is the same possible with text in CorelDRAW?
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I just realized that I have quite a number of text instances (261!) that require that I change the color of the text. All of these instances are associated with multileaders and but are only a portion of the text associated with each multileader.
View 6 Replies View RelatedIs there a way to incorporate the functionality of acad mechanical whereby you can specify the length of text but have it fit within a specific area?
So far I haven't been able to figure out how to get a description to work well with my title block. If I use the fit option, all of the text is stretched, which I don't want. I want it to be normal until it doesn't fit anymore into the predefined area and then have it fit.
I was telling an engineer the other day that I could probably insert his general notes from MS Word into AutoCAD and create nice clean pdf files of the CD sheets that he could email to clients. On second inspection I could tell that, yes I could copy, paste it in, but fixing all the formatting would be a nightmare. Is there any way to retain the formatting such as numbering, tabs etc. when bringing it in to AutoCAD? The idea is to have it be an editable document, so I don't want to just bring it in as a OLE object, pdf or scan.
View 7 Replies View RelatedAfter creating text in Draw X6, I can't drop it into Photo-Paint without it appearing to be improperly cropped; i.e., some outer edges of letters appear to be cut off (see example below). Converting the text to curves does not solve the issue.
Strangely, I have no problem if I copy the same text from Draw X5 - the results are excellent.
I am working with tables that are linked to data from an excel file.After I create a table I dettach it from the excel file. I do not want the excel file to control the table.
I then need to update the text format of all the text in the table. I've noticed that the text strings are still formatted based on how the excel file was formatted.
The only way to remove this is to click on the cell, highlight the text, right click, and then select Remove Character Formatting. Unfortunately I have to do this for each text string.
Is there a way to remove the character formatting for all of the text strings at once?
Even better, is there a way to format the table so that it does not change the text style based on what is in the excel file but instead based on AutoCAD's text styles?
i used the "magic wand" tool to take out the white backgrounds behind a few polaroid images i'm using on my friend's website and there seems to still be a white line still. it's very thin and almost unnoticeable, but you can see it as you scroll through. check out his site and go to the "life" section and you'll see what i mean on the polaroids as you scroll.
my possible reasons behind this are:
1) somehow the "drop shadow" effect creates the white line?
2) in my code i used borders and on the polaroids i set it to no border, and somehow this make there still be a white box around it?