AutoCAD 2013 :: Move Line The Square Move With It?
Jun 5, 2012When I draw a square and then a line attached to the square and then try to move the line the line the square move with it. How can i avoid that
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: How To Stretch Or Move A Line Using Grips
Jul 18, 2013When trying to stretch of move a line in AutoCAD using the grips, it will move additional lines that are touching. It does not do this for every line in the DWG. It seems to be random. They are not grouped. What could be the problem.
View 3 Replies View RelatedAutoCAD 2013 :: Fatal Exception Error When Trying To Move Command Line
Oct 3, 2013I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View RelatedAutoCAD LT :: Red Square Appears When Try To Move Or Resize Lines
Sep 18, 2013A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
View 1 Replies View RelatedAutoCAD Inventor :: How To Move Extrusions / Square Holes
Feb 20, 2013I am using Autodesk Inventor Professional 2013 and I am currently trying to move some square holes that I made (using extrusions). How can I move these around inside the main extrusion (called Extrusion 1 in the attached design) without changing any of the dimensions etc?
Is there a simple way of selecting them all and moving them, or do I have to do it one at a time?
Illustrator :: How To Move Square To Another Spot
Jul 11, 2013I have two different macs, both intel with 4 gigs of ram. I open illustrator CC with a new clean document then just draw a square. When I try move the square to another spot the blue outline moves but the the square is still in the old spot. I have to click several times for the square to show up in the new spot even then it takes a few seconds for the square to move.
Also I can't close the window I am working on. When I click the red button in the upper left corner of the canvas the window won't close.
I can't quit illustrator CC either. I have to force quit it to close it.
Photoshop :: Can't Move Just The Layer I'm Trying To Move With Move Tool
Dec 1, 2006I try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
Photoshop :: Cannot Move Any Layers As It Only Moves Bottom Square
Jun 6, 2012I cannot move any layers as it only moves the bottom square.
View 4 Replies View RelatedIllustrator :: Move Selection Tool To White Square On Bounding Box For Resizing
Aug 28, 2013I am using Illustrator CS4. When I move my selection tool to the white square on the bounding box for resizing, I am not getting the normal arrows that appear. When I click on the box and move the pointer the entire box and image move. This was working OK until about 5 hours ago.
View 7 Replies View RelatedAutoCAD Dynamic Blocks :: Move Line By Another Line
Aug 5, 2011I try to create a new pipe dynamic block. But I have a problem with my block. In the block, the distance2 I wanna change to some sizes follow the table. And the center line, it changes follow the sizes table, and must be center line when I change pipe size. I can not do it. How to make the block working correctly.
View 8 Replies View RelatedAutoCAD VB :: Select Line And Move The Line To Another Layer
May 12, 2011I wan't to move a line with color red and linetype continuous on layer Kader to another layer called Plaatuitslag.
Which code must I use to select the specific line and move it to the other layer Plaatuitslag?
Is it something like If line has color red and linetype continuous then move etc??
At the end i wan't to select all objects in the drawing which aren't on layer Plaatuitslag and delete all those objects.
AutoCad :: Can Move Either Side Of Block But Basepoint Doesn't Move
Mar 24, 2011If I have a dynamic block of a window. I can move either side of the block but the basepoint doesn't move. Is there a way to move the basepoint as well so its not off in space? or just delete it and have it now shown?
View 1 Replies View RelatedAutoCad :: Select / Move Dimensions To Move Up / Down Same Time
May 11, 2011In the example below, I would like to select the three dimensions 14'-1 3/8's, 2', 28' and be able to move them all up or down at the same time...how do I do that?
dims.jpg
Edge Animate CC :: Use Touch Start / Touch Move / Mouse Down / Mouse Move To Move Elements?
Dec 22, 2012How to use touch move and mouse move events events to move elements n edge?
View 4 Replies View RelatedMaya Modeling :: Move / Scale Entire Item - Objects Move Separately
Dec 9, 2012So a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
Photoshop :: Move Tool Does Not Move Layer When Dragging With Wacom Tablet
Jan 14, 2013I am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
Illustrator :: Move Dialog - Option / Enter To COPY And Move Object
Dec 24, 2012What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedAutoCad 2D :: Move Multiple Values In Block To New Tag Line
Sep 13, 2012I have a block with 10 rectangles in each with 3 lines of text. Each 3 lines of text is attributed to a tag
so the first line is IN-0 DESC1,
second line is IN-0 DESC2
third line is IN-0 DESC3
I have deleted the data from
IN-3 DESC1
IN-3 DESC2
IN-3 DESC3
and i want to move the data from
IN-4 DESC1
IN-4 DESC2
IN-4 DESC3 etc
up to the position of
IN-3 DESC1
IN-3 DESC2
IN-3 DESC3
can this be done?
other wise i will have to click on
IN-4 DESC1 cut the data then open up IN-3 DESC1 and paste it then repeat for
IN-4 DESC2 cut the data then open up IN-3 DESC2 and paste it then repeat for etc
AutoCad :: Won't Allow To Resize Move Or Alter Command Line
Oct 1, 2012Currently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
AutoCAD LT :: Unable To Move An Entity Along Line A Specific Distance?
Apr 18, 2012RE: Autocad LT not able to move an entity along a line a specific distance using cursor snap and dynamic input
What I want to do is move a line on an angle a certain distance in the direction of the line itself in this case 20mm
What used to happen is you'd simply select move and an endpoint on the line then hover over the mid or opposite endpoint of the line and enter 20 and it would move 20mm along the trajectory of the line.
The same set of actions now only seem to allow you to move the entity 100mm (the default value) along itself in the correct direction. If you enter 20 it does not move and if you enter 50 it moves 100!
AutoCAD Visual LISP / AutoLISP :: Move Multiple Text To Line
May 31, 2012I have some general knowledge in lisp coding. But I can't seem to figure this one out (even to get started). What I want to do is make a lisp that:
- selects a line
then
- select any amount of text (any type)
then
- moves all the text to that selected line without rotating the text
if a line is perfectly horizontal then move the text of the y axis.
if the line is vertical then move the text of the x axis.
or there can be a prompt asking the user to chose the angle or axis in which the text will move (say if they want to move the text to a slanted line, you can choose to move the text on an angle, while keeping the same format and not rotating the text, or you can ask the user if they want to move it only vertically or horizontally)
I would really like the code to integrate into my autocad.
See pictures
AutoCAD Civil 3D :: Unable To UN-dock Or Move Command Line Window
Oct 23, 2012Civil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
AutoCAD 2013 :: Move Only One Element Of Object
Sep 23, 2013I’ve got a student version (AutoCAD for Mac 2013) , which I got from official website. There starting to appear few problems after a few months of my work.
1. when I’m doing a rectangle, lines that intersect or just lines that contact, in the point of connection appear small blue rectangles and windows of mistakes. If I trying to move only one element of this object, all others elements start to deform in chaotic way.
2. when I’m coping any object on the same page in one file, program start to buzz and I need to close the program despotic.
CorelDRAW X6 :: Move ONE End Of A Line?
Jun 29, 2012I place a line on the page using the 2-point line tool. Later I want to move one end of the line. However, every selection, shift key and gesture I try wants to treat the line as a 2-D shape instead... there seems no way to just move one end.
View 3 Replies View RelatedPaint.NET :: How To Move A Line
May 3, 2012I created a line, and I want to move that line.
When I press on the move selected pixels, it moves the whole section and the move button does not move the line.
How can I move a line that I created?
AutoCAD Dynamic Blocks :: How To Move A Line In Relation To Bottom Center Of Attribute
Apr 26, 2012We have a title block wherein the Location attribute is normally a single line, but occasionally is two or more lines. Within the title block this attribute is surrounded by lines, left, right, top, bottom.
We would like the bottom line to move down when the user adds additional lines to the attribute.
AutoCAD 2013 :: Move Dimension Job But Leave Text Where Placed
Apr 11, 2013Check out the two pics I have added. I did this from Solidworks. Sometimes when dimensioning you have a series of holes that are close together like the ones shown below. What I would like to do is to drag the jog so that the dimension line does not run thru the other hole and the text stays where you put it. I would like to be able to do this without exploding it or going thru some sort of hoops to make it happens. Is this possible in Autocad? I thought that in a earlier version of Autocad you were able to do it but I am not sure.
View 2 Replies View RelatedAutoCAD 2013 :: Annotative Blocks With Attributes Move To Anywhere
Oct 16, 2012When I insert Annotative blocks and change the scale drawing (E.g. 1:100 to 1:200), attributes of Annotative blocks move to anywhere. I tried already ANNORESET and ATTSYNC, and it solved at that moment. But when I close and open the file, the problem appears again. I have to apply ANNORESET and ATTSYNC every moment. How can I definitely solve this problem?
View 4 Replies View RelatedAutoCAD 2013 :: Move / Copy Blocks With Attributes
Feb 10, 2013My entire office has been experiencing drawing crashes as a result of moving or copying certain blocks within a dwg. The problem seems to occur only while executing a Move or Copy command on a block with attributes, and zooming or panning while doing so. My heart sinks instantly because the block will disappear when placed, and I know I am doomed to crash.
I am usually able to pan or zoom a few times, and if I act quickly a Save will work before the drawing then crashes. We have recently switched from 2011 to Civil 3D 2013, and the problem still persists. The two culprits are our slope arrow block as well as hex call-out. Both blocks contain attributes and are frequently used through out our drawings, and this problem proves to be most frustrating when pressed for a deadline.
AutoCAD 2013 :: Slow Mouse Move Xendesktop 5.6?
Feb 13, 2013We have installed autocad 2013 on windows 7 64bits VM (xendesktop 5.6 on VMWare Hypervisor) and the mouse move is very slow or the cursor stop and move again.
I have tried these tips without success
[URL]
AutoCAD 2013 :: Move 2D Objects With Basepoint To Coordinate 0,0,0
Aug 10, 2012If i want to move 2D objekts with basepoint to the coordinate 0,0,0 - what i have to do?
In other PC older Autocad was it simply command "move", selecting objects, pointing basepoint and then typing "0,0,0" and object were there! Now the object doesnt move atall. (Can move only to showing second point in screen-but thisway its not possible to catsh exactly point 0,0,0).