AutoCAD 2013 :: Move Dimension Job But Leave Text Where Placed
Apr 11, 2013
Check out the two pics I have added. I did this from Solidworks. Sometimes when dimensioning you have a series of holes that are close together like the ones shown below. What I would like to do is to drag the jog so that the dimension line does not run thru the other hole and the text stays where you put it. I would like to be able to do this without exploding it or going thru some sort of hoops to make it happens. Is this possible in Autocad? I thought that in a earlier version of Autocad you were able to do it but I am not sure.
I'm using a DXF drawing in my CNC program that uses all three axis. I've scaled the original drawing from 300" to about a 3"x5"". When when I save it as DXF, change it to gcode and run it in my CNC router, the Z depth is more than I want. I'd like to move Z closer to 0 without changing the XY. Can this be done?
I trained in R14 many many years ago so I probably already know my answer it's just tucked away behind too many other life experiences. Right now I'm using Autocad LT 2004 or 2006. I'm away from my CNC machine so I'm not really sure.
Im trying to move radial dimension text away from the dimension line so I can add in text between the dimension and dimension line.
#1 is the default style #2 is what happens when I do "Move text only", it moves the dimension line to inside the radial and I do not want that. #3 is how it looks when I just manually edit the dimension text #4 is how I want it to look
#4 is a combination of dimension and a manually added leader with the dimension line removed. How can I move the dimension text on a radial without the dimension line automatically moving to the inside? Or is there another way to add in text outside the box while having the dimension text offset from the line?
There was a command in 2008 called Dim Text Edit that allowed one to move dimesions - is there an equivilent in 2013? There was another one called Dim Update; is there one in 2013?
I just made an object, specifically, a rectangle with 6 units of height and 30 of long. Now I want to write text in the middle of the rectangle, I was able o find the middle point using osnap and a diagonal line (the point would be 3 units of height and 15 of long) but when I start writing text (with dtext) the text starts writing from that middle point to the right, If its a long text its not in the middle it starts in the middle :/ what can I do so the text will be exactly at the center?
Just upgraded to Autocad 2013 and I've noticed that if you click a dimension then right click the "dimension text position" is missing. Also double clicking it to get to properties, under text position I don't get the option to change to sat centred or above line. how to get it back. I've switched to classic view if this has any effect.Inventor 2013
Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
I am as-building some model space drawings. Client wants model space. I am trying to determine how to size the text and dimensions.
Ex: drawing 1/2" =1'-0", I scaled the drawing bdr up 24 times. What is the right sizing for text, dims. Arrows to get 1/8" text, etc? So far the arrow heads look to tiny.c
When placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
In AutoCAD 2013, when I try to select a dimension object for moving, erasing, &c, the text disappears. How to get it to stay displayed? Seems to just be when using AutoCAD 2013.
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
I have the fill color turned on in my dimension style to background. I want to adjust the "masking" box size. Just as you are able to in the text edit-background mask. I believe the default must be 1.25 larger than the text. I would like it to be 1.00. Is this possible? You can adjust the text background mask size, but not the dimension mask size.
how to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
When I move any object using move command then dimensions are move with objects but dimensions are stretch and show as long extension line in the drawing.
I just started using Inventor and I have this issue, that whenever I set a dimension in a sketch, the sketch doesn't update to the new dimension until I move my mouse/cursor. Is this normal? Is there any way to change it so it updates as soon as I hit the enter button (after entering a dimension)
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
My office has two desktop printers, both HP. Our Officejet 7000 wide format prints great. On the HP Officejet 7500, we are often seeing text printing errors. It will not print the text from vertical dimension strings, and cuts off some M-text at an imaginary vertical line in the middle of the text box. PDF's of the same drawing look fine. Is this a printer driver issue? Is there anything I can do within AutoCAD?
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
