Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
I am using annotative dimensions and when I use normal dimensions the text comes out correct at 3/32" but when I use aligned dimensions the text height is 1/8". How do I fix this?
View 5 Replies View RelatedI am trying to edit the placement of vertical text within a dimension line - I wish for the text to be outside the dimension line not inside.
View 4 Replies View RelatedIs it possible to have an aligned dimension where you can type your own text in the field "under"?
It is only possible to do this with linear dimensions but I have a building that isn't straigth and there I have this problem with linear dimensions that are not parallel with the wall.
I need to be able to Wrap Text along the outside of a circle, i now i used to use Arc-Aligned text but cant find it in Autocad 2013 on a Mac.
View 4 Replies View RelatedIs there a way to anchor dimensions to views so that when the size changes, the dimensions retain their location in relation to the view?
View 5 Replies View RelatedI have a line with shapes on each end like an aligned dimension. I want to have a grip on each end to let the user put the ends where they want.
I tried a polar stretch pair, with two rotation pairs, but am lost. The stretch is easy, but does not rotate the arrows to stay aligned to the line. I don't actually have arrows, but most know the behavior of aligned dimensions. I don't have extension lines though, like the dim would so ignore that part.
Is it possible to edit the percision for an aligned dimension. I know that the aligned dimension requires walls to be parallel. But what if two walls are .000000002 degrees off from being perfectly parallel? Would that really be enough of a difference to make thealign dimension tool unuseable? Is there a way to change the percision for the aligned dimension to read fewer decimal places? I have a rather large project that is in the later stages of CD's and really don't want to have to recheck the alignment of every wall.
View 1 Replies View RelatedI just made an object, specifically, a rectangle with 6 units of height and 30 of long. Now I want to write text in the middle of the rectangle, I was able o find the middle point using osnap and a diagonal line (the point would be 3 units of height and 15 of long) but when I start writing text (with dtext) the text starts writing from that middle point to the right, If its a long text its not in the middle it starts in the middle :/ what can I do so the text will be exactly at the center?
View 5 Replies View RelatedJust upgraded to Autocad 2013 and I've noticed that if you click a dimension then right click the "dimension text position" is missing. Also double clicking it to get to properties, under text position I don't get the option to change to sat centred or above line. how to get it back. I've switched to classic view if this has any effect.Inventor 2013
View 8 Replies View RelatedI am as-building some model space drawings. Client wants model space. I am trying to determine how to size the text and dimensions.
Ex: drawing 1/2" =1'-0", I scaled the drawing bdr up 24 times. What is the right sizing for text, dims. Arrows to get 1/8" text, etc? So far the arrow heads look to tiny.c
Check out the two pics I have added. I did this from Solidworks. Sometimes when dimensioning you have a series of holes that are close together like the ones shown below. What I would like to do is to drag the jog so that the dimension line does not run thru the other hole and the text stays where you put it. I would like to be able to do this without exploding it or going thru some sort of hoops to make it happens. Is this possible in Autocad? I thought that in a earlier version of Autocad you were able to do it but I am not sure.
View 2 Replies View Relatedim a mac user - whenever i go to do a linear dimension nothing shows up?
View 5 Replies View RelatedAt work we occasionally find the need to override a dimension with a text description. Is it possible to stack this text?
View 5 Replies View RelatedWhen placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
View 3 Replies View RelatedIn AutoCAD 2013, when I try to select a dimension object for moving, erasing, &c, the text disappears. How to get it to stay displayed? Seems to just be when using AutoCAD 2013.
View 6 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedI have the fill color turned on in my dimension style to background. I want to adjust the "masking" box size. Just as you are able to in the text edit-background mask. I believe the default must be 1.25 larger than the text. I would like it to be 1.00. Is this possible? You can adjust the text background mask size, but not the dimension mask size.
View 8 Replies View Relatedhow to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
Using AutoCAD 2013, I have set my the placement of the alternate units to "Below primary value" (in Dimension Style), but they do not go underneath, they remain after the primary units. I tested in 2012, and it works fine there but not in 2013.
View 3 Replies View RelatedThe above image is the closest description of what I mean by a "chord" setting. I need to be able to place lines with a specific length and orientation at a certian radius from two nonparallell curved lines. I've been finding it extremely difficult.
The blue lines are the property lines and the circles are the setbacks (hypothetically). To simplify the problem I offset the blue lines by the setback like so. which brigs me to the original problem. I need to place the building at the optimal point. So far, I have only been able to get close and I know/think there should be a better method to solve my problem. In the example I provided, I knew exactly where the building should be placed because the offsets were the last thing I drew. How can I get this result if my drawing is composed of fully drawn but nonaligned components?
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
i am opening file in autocad 2013, my all dimension tags and text and point are merged with my other drawing objects how can i separate.
View 1 Replies View RelatedI have the text style set to match text orientation to layout and it works, but when I use the same text style in mulitleader the text doesn't rotate with the layout 2013 Civil 3D
View 9 Replies View RelatedI have a problem with the management of the cloud of points with autocad 2013. and precisely:
- What is my need: using orthogonal views create section planes of small portions of a cloud to be scanned.
- What is my problem: When I align a view, the bounding box is not aligned to the same, so this involves a wrong cut plane to create the section
How to create a view that lines up perfectly with a face of my 3D object.
View 2 Replies View RelatedI have just installed an AutoCAD LT 2012 in my PC, and I am having problem of reading a file created by my colleague using AutoCad 2010. I tried the TrueView, and it is no use. The problem I am facing is the background is Black instead of white, and the text is not aligned properly.
View 3 Replies View RelatedTrick to keeping objects aligned with a helix when using an associative path array? The animation below demonstrates the problem where I can't seem to keep the "treads" on a spiral stairs aligned with the center of the helix. (fewer objects accentuate the problem)
View 3 Replies View RelatedIs there any way to pull text from a spreadsheet into arc-aligned text? Like if I were trying to make round inspection tags but didn't want to type in the inspection code each time, or if I needed to change something? Is it possible to put a field into the text to refer to a cell location in Excel?
I just started using AutoCAD 2011 (I was previously using AutoCAD 2005) and am having a hard time finding my old controls while learning all the new features for which I got the program.
When creating views in Inventor 2013 the text displayed for example VIEW001 (1:1)VIEW 001 is placed under the view by default. I would like this to be above the view by default.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
CS6 Ext on Win 7 Ultimate
Everytime I use the text tool and want to type text, it is:
1. right aligned, and
2. cursor stays left and pushes text to the right.
All stops are added to the left of the text.
I have already reset the tool and even my preferences.