I have just installed an AutoCAD LT 2012 in my PC, and I am having problem of reading a file created by my colleague using AutoCad 2010. I tried the TrueView, and it is no use. The problem I am facing is the background is Black instead of white, and the text is not aligned properly.
I am using annotative dimensions and when I use normal dimensions the text comes out correct at 3/32" but when I use aligned dimensions the text height is 1/8". How do I fix this?
Is there any way to pull text from a spreadsheet into arc-aligned text? Like if I were trying to make round inspection tags but didn't want to type in the inspection code each time, or if I needed to change something? Is it possible to put a field into the text to refer to a cell location in Excel?
I just started using AutoCAD 2011 (I was previously using AutoCAD 2005) and am having a hard time finding my old controls while learning all the new features for which I got the program.
Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
What I want this block to do is to keep the "REF. NORTH" text aligned and properly spaced whithin a single motion while rotating it with the thick line.
I am trying to use the Arc-aligned text command from the Express tools menu. No matter what style, height, offset i enter i get a box that says "Invalid text!". I never use this command in my work but am trying to create a banner
Is it possible to have an aligned dimension where you can type your own text in the field "under"?
It is only possible to do this with linear dimensions but I have a building that isn't straigth and there I have this problem with linear dimensions that are not parallel with the wall.
We use linestyles for utilities such as w for water, s for sewer etc. linestyles look like --w--w--w--w--. in Autocod 2004, if you reverse direction of line or rotate line 180 degrees drawn with this linestyle, the w's would look like m's because text reversed with line (this is what i want to happen) in Autocad 2012 and 2013, when i draw a line with the same linestyle, the text will not reverse, even if i manually rotate the line 180 degrees, the w still reads w and not m. is this a system variable, mirrtext did not work.
Is there a way to force text pulled from a drawing property to wrap to fit a cell of Mtext? In otherwords,... a multi line field? Some of our drawing titles are several lines, and instead of wrapping inside the field box in our titleblock, the text just spreads out all over. I'd rather not go back to the old method of having a custom property for Line 1, Line 2 etc....
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
I installed acad 2014 and copied all my font files into the directory that cad says it looks in under the support paths, and the main font used is a true text font (penguin) and it is not showing up right.
I am currently trying to make a bracelet with text engraved in the outside of it with autocad, and my current problem is that I have to make the text 3D before I can subtract it from the bracelet. I am using autocad for mac, which means I dont have the express tools, most notably textexp. I am fairly sure that, without other programs, making 3d text with autocad for mac is impossible. I have tried making text in adobe illustrator, outlining it, and exporting it to autocad, but when I explode it (with the default explode command) and extrude the text, it looks like this:
As you can see, very few of the letters get properly extruded, and some arent even effected at all. I've tested other fonts, and they all have the same problem, albeit with some differences in exactly which letters are changed. Except papyrus, in which none of the text gets extrudedhow to make outlined text from illustrator extrude properly, be my guest! The same goes if you have a different way to make 3D text.
When I xref a drawing created by Practicad into my host drawing, the text size shows up less than half its normal size. This occurs regardless of choosing or not choosing any of the radio button options in the proxy info box that pops up when I open the drawing. It happens on both my desktop and laptop. Practicad (MetaLab Inc.) web-x'd into my computer and confirmed the enabler is installed and the issue has noyhing to do with them. My host drawing scale is set to the same scale as the xref.
I'm trying to print a block of black text in LR 4.4. It looks just fine when I go into the PRINT module but when the text prints, the letters have a fine black outline but most of the character is white.
I want to do some text animations. However, when I place in my text layer and type in my text it comes up a a bunch of black blocks, as per my screen shot.
I am using Adobe Photoshop CS3. I have a spreadsheet of Greek translations. When I copy and paste the text into Photoshop, certain characters are missed out or replaced with an incorrect one. I have tried downloading fonts that support the Greek character set, but still no luck. If I paste this text into any other applications (Word, explorer etc) the text displays properly. I was wandering if there is a setting or anything in photoshop that I need to change?
Yesterday I installed the newest GIMP 2.8 version for map making. I want to make a great map of USA/Mexico.Everything works fine except the most important thing for me, which is wrapping the text along the path.
The text is usually distorted and away from the path.This is how I do it:
Tools -> Paths -> make the path on map by right clicking left click on just made path -> Tools -> Text right click on text -> click on Text Along Path
I have a document where the text as been coverted to paths. The document prints fine. However when I save the document as a PDF for distribtion, the text doesn't present properly. Particualry the l's. its only a few lettes but it is enought to make it look terrible.
Ever since I've installed CS6 my Text tool has not been working properly AT ALL. a Number of problems
1. I cant resize using the 00.pt at all. If I switch from 72 to 48 (or any other number) it will stay the same 2. manually rezising also causes issues, I don't get a full preview of the text even after sized. its cut off at 50%-75% height 3. the bounding box doesn't even go outside the entire object. its usually about 20% of the height 4. it often needs to "load" I've NEVER seen this before.
AS3: In component list my icon and label text are not align properly, when app is started, label text is over icon and when I put mouse pointer over any item in the list then alignment it's ok.
This is when I test flash app: And when I put mouse pointer over any item, alignment of icon and label is ok! Here is code:
I teach in a large HS and students (and AutoCAD) occasionally stump me. I have architectural templates with layouts set up for Arch D paper. We almost always print to either ANSI B or Arch C paper. I have a routine for students to follow which will properly scale and position the layout on the desired paper size. Occasionally a student will do something to the layout which causes the WCS to be placed other than at the lower left print corner.
The result is the corner of the border line is displaced and half the drawing is off the page. When I check the limits the lower left corner has some very large values (don't know how they got changed). Most of the time we have to create a new layout and copy/paste the border and viewports.
AC2005, New to 3D and having a bit of a rough time (frustrating) getting objects to stay aligned from one Viewpoint to another. I move an object to what appears aligned w/ another object in FRONT view, but from TOP or any SIDE view, that object is way off in the background or half of the drawing away.