AC2005, New to 3D and having a bit of a rough time (frustrating) getting objects to stay aligned from one Viewpoint to another. I move an object to what appears aligned w/ another object in FRONT view, but from TOP or any SIDE view, that object is way off in the background or half of the drawing away.
View 9 RepliesNow that I have been able to move things around in my view point, I notice that the VP appears to be bigger than the boarder. I have tried clicking on the corners to get the resize handles to appear, but they wont.
Have also tried the stretch command, and making sure that pickfirst is set to 1.
I have got a screenie of it, as it appears on the bottom part the boarder isn't showing either.
I created a drawing with multiple layout tabs, so as to create different maps. My display manager consists of data connections & layers added from the Layer Properties Manager. When I activate a viewport from the layout, I want to freeze some of the Data Connection items (like shp files). How can I freeze these items within the active viewport only?
View 9 Replies View RelatedI am using the following routine definition then calling the different view poins from a pop up menu.
Each time I switch veiw points it drastically zooms out. I would like to maintain the "zoom distance" if there is such a thing when switching views.
Ideally, like when in 3dorbit, I would like it to swing views around similar to that but to the defined viewpoints as below....
(DEFUN V (inp) (setq inp (strcase inp))
(cond ((= inp "T") (SETQ IXY 270) (SETQ FXY 90)) ((= INP "F") (SETQ IXY 270) (SETQ FXY 0)) ((= INP "RE") (SETQ IXY 90) (SETQ FXY 0)) ((= INP "L") (SETQ IXY 180) (SETQ FXY 0)) ((= INP "RI") (SETQ IXY 0) (SETQ FXY 0)) ((= INP "URI") (SETQ IXY 0) (SETQ FXY 45)) ((= INP "UL") (SETQ IXY 180) (SETQ FXY 45)) ((= INP "UF") (SETQ IXY 270) (SETQ FXY 45)) ((= INP "URE") (SETQ IXY 90) (SETQ FXY 45)) ((= INP "URF") (SETQ IXY 315) (SETQ FXY 35)) ((= INP "URR") (SETQ IXY 45) (SETQ FXY 35)) ((= INP "ULF") (SETQ IXY 225) (SETQ FXY 35)) ((= INP "ULR") (SETQ IXY 135) (SETQ FXY 35)) );COND (COMMAND "VPOINT" "R" IXY FXY) );END V.LSP
I'm trying to reconcile 3ds max's FOV camera settings to the settings I am presently using in Resoft Windfarm (a program which I use by imputting co-ordinates and height of a camera point and then specifying a horizontal FOV, which gives a real life viewpoint at the exact horizontal field of view that would be seen in reality.)
I'm currently setting the units to metres, importing my terrain at 1:1 and positioning modelled elements at 1:1 on top of the terrain in the correct 'co-ordinate' position, using the UCS with the exact 6 figure co-ordinate points. I am positioning my camera the same way, at the correct height and exact rotation, but when I specify the horizontal FOV it looks much smaller than it does in windfarm, like the field of view is not the same? I'm pretty new to 3ds max
I create a contour layer from a DEM raster and everytime it comes out about 700' offset from the DEM.
View 8 Replies View RelatedI need to be able to Wrap Text along the outside of a circle, i now i used to use Arc-Aligned text but cant find it in Autocad 2013 on a Mac.
View 4 Replies View RelatedI teach in a large HS and students (and AutoCAD) occasionally stump me. I have architectural templates with layouts set up for Arch D paper. We almost always print to either ANSI B or Arch C paper. I have a routine for students to follow which will properly scale and position the layout on the desired paper size. Occasionally a student will do something to the layout which causes the WCS to be placed other than at the lower left print corner.
The result is the corner of the border line is displaced and half the drawing is off the page. When I check the limits the lower left corner has some very large values (don't know how they got changed). Most of the time we have to create a new layout and copy/paste the border and viewports.
My plotted output is off center, I need getting it back to center.
View 8 Replies View RelatedI have just installed an AutoCAD LT 2012 in my PC, and I am having problem of reading a file created by my colleague using AutoCad 2010. I tried the TrueView, and it is no use. The problem I am facing is the background is Black instead of white, and the text is not aligned properly.
View 3 Replies View RelatedI have the text style set to match text orientation to layout and it works, but when I use the same text style in mulitleader the text doesn't rotate with the layout 2013 Civil 3D
View 9 Replies View RelatedI want to add a block with a center aligned attribute to drawing file that is not open in the autocad editor; however, the attribute alignment doesn't display when i open the drawing. But when i open the attribute editor i can verify that the alignment is set properly and then after closing the attribute editor window the alignment actually displays correctly even though no changes were made.
I read a number of other posts with the same or similar issue, but i still have been unable to get mine to display right. My code is below. What do I need to do to force the attribute alignment to display correctly?
private void centerAttribute() { var path = @"c: est.dwg"; using (var database = new Database(false, true)) { database.ReadDwgFile(path, FileShare.ReadWrite, false, password: ""); Transaction transaction = null; try { transaction = database.TransactionManager.StartTransaction();
var previousDatabase = HostApplicationServices.WorkingDatabase;
[code].........
I was using arc aligned text and i can't seem to change the charter spacing. it is grayed out.
View 3 Replies View RelatedI have alignement of wall or embankment. I have existing ground including this corridor river. I have also CSV file with points (x,y,z). On my sketch there is drawn. Points present FDL (flow defence level) maximum level of river in case of huge rain or other things. These are almost aligned. I need to transform it (project) into alignment. I have to create profile of EG, FDL (based on this point) and then create new profile of height of wall or bank. What is the best solution for projecting this points. I tried with grading (distance and grade0%) I tried then with offsetting this feature line based on points and used it as breaklines. Created surface had holes.Even real is worst because alignment is perpendicular in same places to river.
View 4 Replies View RelatedI am using annotative dimensions and when I use normal dimensions the text comes out correct at 3/32" but when I use aligned dimensions the text height is 1/8". How do I fix this?
View 5 Replies View RelatedIs there any way to pull text from a spreadsheet into arc-aligned text? Like if I were trying to make round inspection tags but didn't want to type in the inspection code each time, or if I needed to change something? Is it possible to put a field into the text to refer to a cell location in Excel?
I just started using AutoCAD 2011 (I was previously using AutoCAD 2005) and am having a hard time finding my old controls while learning all the new features for which I got the program.
Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
I am trying to line up labels in a dragged state. When I select the label and move it I can line it up nicely (as shown by the 6" V&B looking in line with the hydrant. When I select the point, the label shifts left (as shown by the 6" V&B far left). Is there a neat way to line up multiple labels? Civil 3d 2012
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have some models which are based on skeleton modeling and where the actual parts are modeled at the position where they are in the assembly. When the skeleton part is changed the parts will update and their orientation related to the origin planes can change. This is where the problem lies, on the drawings of these parts the views are all skewed after an update.
Is it somehow possible to tell Inventor that all views on a a drawing should stay alligned to a workplane? Because it are all parts and no assemblies I cannot use posreps (and I don't want to use dummy assemblies). I also tried setting a specific edge to be horizontal with the rotate command in the drawing. This works for the base view, but all projected views will still be skewed after an update.
I have a problem with the management of the cloud of points with autocad 2013. and precisely:
- What is my need: using orthogonal views create section planes of small portions of a cloud to be scanned.
- What is my problem: When I align a view, the bounding box is not aligned to the same, so this involves a wrong cut plane to create the section
How to create a view that lines up perfectly with a face of my 3D object.
View 2 Replies View RelatedIt seems that there is a problem with the section view function in Inventor.
The projected section view is not ailgned with the base view.
I assume that the attached screenshot is very clear.
[URL]
I am adding a center aligned attribute to a drawing that is not open in the autocad editor. the alignment works if i call the function from the main thread like this.
[CommandMethod("center")]public void Add() { Do.AddAttribute(); }
But if the method is executed on another thread (which it is when handling a msmq message) then the attribute is added but the alignment doesn't display even though the property is set (and can be verified in the attribute editor).
private void OnReceiveCompleted(object sender, ReceiveCompletedEventArgs e) { Do.AddAttribute();}
How can i get the attribute alignment to work in another thread?
code is below:
public class Do { public static void AddAttribute() { var path = @"c:WAM444B4-002.dwg";
using (var database = new Database(false, true)) {
database.ReadDwgFile(path, FileShare.ReadWrite, false, password: "");
Transaction transaction = null; try {
[Code] ......
I am a bit new at 3D drawings, for many years it's been only 2D files used for .dxf purposes. My method is using "3D face" and them "extruding" to the size I want. When I view my layout or model, my 3D objects appear to be solids, but show some transparency. When I preview or print, they only come out as lines. How can I make these objects solid and print them?
View 9 Replies View RelatedI'm trying to understand extrusion to 3D solids better. This started when I drew a joined, closed 3dpolyline and found it wouldn't extrude (the shape titled 3D POLYLINES 4 sides joined, in the attached DWG), even though everything lies in the same plane (z=0). It gives the error "segment chord not perpendicular to normal". A chord is part of a circle, and there are no circles in the .dwg, so I don't understand the error. If you join only 2 or 0 sides, then at least 2D extrusion to a surface is allowed, but not if all 4 sides are joined, i.e. one 3D polyline.
If I draw regular polylines overtop the 3D polylines, then join and close them, it extrudes into a solid. This suggests that 3D polylines can't be extruded into a solid when regular polylines can, yet if I draw some scratch 3D polyline geometry that is joined and closed, these 3D polylines will join. It's as if I've found some secret shape that AutoCAD refuses to allow extrusion on.
How it's a 3d problem I though I'd ask anyway) but my pic is my problem (in red). How to get the curve in the solids (inside the red). I tried fillet but that didn't work .
View 9 Replies View RelatedI have a single-line riser diagram in 3D I want to flatten to 2D. things like super flatten and such don't work because I'm not using solids, just single lines.
View 4 Replies View RelatedWhat I want this block to do is to keep the "REF. NORTH" text aligned and properly spaced whithin a single motion while rotating it with the thick line.
AutoCAD LT 2012
Windows 7 - 64 bit
I frequently use the "Make Components" feature in order to derive assembly parts from solid bodies in a single master part file. Then I can quickly align the parts in the assembly with the "Ground and Root Component" utility. However, when the part is placed at an angle, the derived part becomes misaligned in the viewports of my idw files after the part gets rotated to a new angle. Then I have to manually reset the rotation by editing each viewport and selecting "View Face." If the angle has changed only slightly, sometimes I won't notice the difference, and I'll forget to re-align my viewports. Is there some way to automatically keep a viewport aligned with an specific face on a part?
If that's not possible, I guess the simplest method would be to place each part into its own assembly and constrain it to the global UCS, but I don't want to have to do that for every angled part in my assembly.
I also considered drawing only sketch blocks in my master file for the angled components, and deriving the sketch blocks to create parts that are properly aligned with the origin planes in their respective ipt files, but with that method I'd end up with a more complex master file with lots of exported parameters and extra working geometry, and I'd have to constrain these parts manually instead of using "Ground and Root Component."
-Using Autodesk Inventor Professional 2012
Working in AutoCAD 2010. Recently I've started to notice that the dimensions on my print are not exactly aligned with the model/object. Only the dimensions seem to be shifted slightly in two directions (~1mm?). On screen, everything looks great.
Typically, I design 3d parts (model tab), then in the layout tab set up viewports (mview), and dimension in paper space...
Is there some paperspace offset I may have inadvertently invoked?
i need to Create aligned CS line with increasing Chainage Number and Name through a center line (yellow line). The CS lines are 25 meter apart, it can be done by ME command, but can not automatically increase the Chainage number and CS number.
the CS number (CS-1200) is increasing by 1, like CS-1200, CS-1201, CS-1202, ....also The chainage number (CH Km 29+975) is increased by 25, Example: CH Km 29+975 , CH Km 30+000, CH Km 30+025, CH Km 30+050....
i would like to do it automatically, otherwise i have to keep editing for a long time,