AutoCAD 2010 :: Practicad Text Size Not Scaling Properly
Oct 5, 2012
When I xref a drawing created by Practicad into my host drawing, the text size shows up less than half its normal size. This occurs regardless of choosing or not choosing any of the radio button options in the proxy info box that pops up when I open the drawing. It happens on both my desktop and laptop. Practicad (MetaLab Inc.) web-x'd into my computer and confirmed the enabler is installed and the issue has noyhing to do with them. My host drawing scale is set to the same scale as the xref.
View 9 Replies
ADVERTISEMENT
Dec 15, 2013
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies
View Related
Jun 22, 2012
I am trying to enlarge the text from an exported cad drawing from Dialux (lighting calculation software)...it has exported a field of values over a large area but the text is really small and illegible when its plotted as an A1 pdf
Is there anyway to blow all the text values up at once without moving them from their positions with relation to the boundaries of the roads and buildings? Here is a screenshot of the view with CAD...this is a small area of the entire scheme and those little black smudges are the numbers i need to scale
CAD Screenshot.jpg
I guess in a 3D program this would be equivalent to having the pivot point located in the centre of each set of numbers so you could scale them using the centre of each number as its scale point but I am stumped by how to do this in Autocad Architecture 2011..
View 3 Replies
View Related
Jun 11, 2013
I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
View 9 Replies
View Related
Jan 16, 2012
Is there a way to force text pulled from a drawing property to wrap to fit a cell of Mtext? In otherwords,... a multi line field? Some of our drawing titles are several lines, and instead of wrapping inside the field box in our titleblock, the text just spreads out all over. I'd rather not go back to the old method of having a custom property for Line 1, Line 2 etc....
Acad 2011
View 6 Replies
View Related
May 2, 2012
I need a way to properly scale a drawing that I've pulled into AC..
Example, I get a drawing for customer in PDF that I have to trace into AC. Said PDF is marked 1/4 = 1. Up to this point I've been guessing at accuracy by measuring doors to 3'. I know this cannot be the prefered way
View 9 Replies
View Related
Oct 1, 2012
In Autocad 2011, Mleader, is there a way to set the block size and the text size with the source block (square, cercle etc.. I would like to make it a specific size instead of measuring then scaling.
View 2 Replies
View Related
Jun 13, 2012
if i have a size indicated in my text style and i change the size from the style controls, updating the style, should all the instances not change to comply? This is how styles work in other software and how I intuit controlling this parameter.
View 1 Replies
View Related
Feb 19, 2012
I used the BEDIT command (editor) on my block to modify the text size then save the block editor changes. Then use ATTSYNC to perform the changes on all existing blocks references to resize the texts, but after i complete the ATTSYNC command, the text in all the blocks disappear.
View 2 Replies
View Related
Feb 4, 2012
I'm having problems on setting my scaling up in dwg1 that was sent to me. dwg1 did not have any viewports set up. dwg2 has a scale of 1''=20' I need to set up dwg1 to 1 to 1 first, this is my master drawing,
View 2 Replies
View Related
Mar 29, 2013
Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
View 9 Replies
View Related
Nov 9, 2011
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
View 4 Replies
View Related
Mar 26, 2012
I've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies
View Related
Apr 1, 2012
I am updating a drawing that someone has sent me. The drawings are to be scaled in 1/2"=1'-0", but the drawings are all done in metric. So I reset the scale list and set it at 1/2"=1'-0" in paper space ( the paper size I am working with is 8.5" x 11") when I click on the 1/2" scale my drawing becomes huge and I cant see all of it. In page setup manager I have the plot scale at 1:1 and right below that it says 1 mm and under that 1 units. In model space the drawings have been done in 1:100.
View 9 Replies
View Related
Sep 24, 2013
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies
View Related
Dec 8, 2011
I am a beginner for CAD Drawing and a want to scale an entire drawing in just one axis without modifying the dimensions in other.
scale the attached drawing document along X axis by reducing the lenght to be fit into an A4 sheet. Without compensating the markings' visibility.
View 4 Replies
View Related
Aug 6, 2012
I have two drawing files of arrows. One inserts uniformly and the other assumes that I want to specify the X and Y scaling separately. These drawing files do not contain blocks at the moment, but may have as some point in the past. I can't find anything in the drawing files that sets the block scaling when there isn't a block in the drawing, but one of them is behaving as if there is and the other one is not. How do I change all of my similar drawing files to insert scaled uniformly?
I see the option to scale uniformly on the insert dialog box, but I need this for a script, so I need to use the command line version.
Here is a copy of my command line for inserting the two drawing files:
Command:
-INSERT Enter block name or [?]: Sign-Arrow-12-A-Left
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/Rotate]: 0,0
Specify scale factor <1>:
Specify rotation angle <0>:
Command:
-INSERT Enter block name or [?] <Sign-Arrow-12-A-Left>: Sign-Arrow-16-A-Left
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]: 0,6
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>:
Enter Y scale factor <use X scale factor>:
Specify rotation angle <0>:
Command:
Note that the first time Sign-Arrow-12-A-Left comes in with no reference to option X/Y/Z, but the second time Sign-Arrow-16-A-Left has the option, and there for requires the extra line of input.
View 2 Replies
View Related
Jan 9, 2013
I work in both metric and imperial dimensions. I specify european cabinetry, and most of the architectural drawings i receive are for US clientelle so they're in ft and inches. When dimensioning, it's important that the cm dimensions are accurate for the factory, but the inches are accurate for the contractors.
So my drawing had 1 plan and 4 elevations. All drawn correctly. All scaled together, never one at a time. Yesterday morning everything printed correctly with this drawing.
Randomly, after some very minor changes to the drawing, 1 elevation remained at the correct scale and the plan, and 3 elevations randomly scaled down and at different scales from each other. Also, when i plotted this to a printer it matched what was on the screen. When i plotted it to PDF immediately after, the PDF's reflected 5 totally different scales where all 5 drawings and didn't match the screen or print. For example: a cabinet height in one elevation was 87cm, the next 86cm , and the next 83.9cm. Printed to pdf at totally different dimensions (see attached).
The file was closed and reopened, and the plan, and 2 different elevations were at an even different scale, smaller scale than before. They more closely matched what I got when plotting to a PDF.
I purged, and audited (no errors found), I copied only the bare bones necessary info into a new document, and scaled everything by reference to the size it needed to be. Most of the drawing automatically corrected themselves to the correct dimensions with the one step.
However, certain lines on my plans scaled at a far greater scale, while one wall was accurate, and one wall was off just a fraction. So even though i selected the entire thing and scaled it up together, different layers scaled differently. Basically i had to redraw the plan almost entirely.
The same happened with 3 of the 4 elevations. One section scaled correctly, one section scaled more than it should have and made that portion off.
So i had to redo that elevation as well.I created guidelines and set them where they need to be to align every single wall and cabinet and locked the layer in the hopes that if things move again, the guides will remain.
This has happened randomly with drawings previously, but only by a degree of .1 to .3 cm. I figured this was from scaling the drawings and dimension accuracy. While that was annoying, it was minor. This time we're looking at 2-8 inches difference which can really mess up a job if unnoticed.
what could cause only portions of drawings to scale differently than the rest and at random times even when the scale command hasn't been used? And between closing a document and reopening it? AND from printing to a printer and to a PDF?
View 4 Replies
View Related
Jul 4, 2012
Ive never done a UV unwrap before. I have the polies i want peeled and stuff, and it looks accurate. However in the UV editor, the unwrap of the polies is too large..I want to scale up the checkered part of the UV editor, is there any way to do this? im kinda lost as to whether im supposed to scale that up or scale down the unwrap.
View 2 Replies
View Related
Oct 17, 2012
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
View 6 Replies
View Related
Oct 19, 2012
I think the MSLTSCALE / PSLTSCALE / annotation scales are fantastic to use when showing the details / plan at different scales (1:100 / 1:50 / 1:1) without having to use LTS to show different scales. I am using AutoCAD 2011.However, I noticed one snag. In the old Autocad before the MSLTSCALE was introduced, I used a shape linetype - a sino shape which I created for insulation in the wall cavity as well for curtain in the interior plan layout (with MSLTSCALE set at 0 and LTS set at scale factor at 1 and use paperspace scaling at desired scale.
When MSLTSCALE / PSLTSCALE are set at 1, the sino linetype will of course changed accordingly to different scale .I prefer to keep the MSLTSCALE / PSLTSCALE at the default 1 with LTS at scale factor 1 as I want the dashed linetypes to updated accordingly to the scale. At the same time I don't want to have the sino linetype changed (keeping the sino linetype at constant 100mm width). Is there a way to control one linetype at MSLTSCALE = 0 and keep the rest of the linetypes at MSLTSCALE = 1.
I don't think it is possible as MSLTSCALE is for general setup. Instead I would have to forgo using the sino lintype and used a block instead. But a way to control an individual linetype scaling.
View 6 Replies
View Related
Oct 30, 2012
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
View 3 Replies
View Related
Oct 24, 2012
I downloaded a model of guitar as .dxf file from here. But somehow it opens like the image attached below. I've changed the visual style to realistic but it seems, its all just lines and no solid body.
View 4 Replies
View Related
Jan 19, 2013
I have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
View 8 Replies
View Related
Jan 26, 2013
Why should scaling a layer in photoshop CS6, have an effect on the size of the file?
View 17 Replies
View Related
Dec 13, 2012
If I transform a type with the transform tool or "command t" the font size displayed when highlighted doesn't update to larger font size. If the layer is selected the correct font size is displayed. I updated a coworkers's photoshop and he experienced the same issue.
View 6 Replies
View Related
Feb 21, 2013
I am currently using AutoCAD 2012 and having problems with the STRETCH command.When I select 3 lines, then deselect 1 of them lines and then select the STRETCH command it does not stretch the selected lines.
Now this is the way I have done in it in previous versions and it has worked. (AutoCAD 2010). Our Company has recently moved to 2012.Is this a function that has been removed with this version or am I doing something wrong?
View 4 Replies
View Related
Oct 31, 2013
I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.
I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.
Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.
View 3 Replies
View Related
Feb 19, 2013
Xref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies
View Related
Nov 19, 2013
At work we have been using layer states to set line weights and colors in multiple xref's for plotting demo and install drawings.
So what is happening is that we continue to receive updated files from other groups and I'm unclear on how to update the layer state to include the new layers that have been included in the updated xrefs.
View 1 Replies
View Related
Oct 25, 2012
On ACAD versions higher than 2005 the STRETCH command does not work properly. The problem happens when selecting the items from the left to right. The item is MOVED instead of STRETCHED. It works normally when selecting item from Right to Left. However I need it to work from Left to Right so that I can individually select the item that I want to stretch. Because of this, I am still using 2005. Both 2009 and 2012 have this BUG, making them un-usable for my applications. I just got a new computer with 2012 version only, but I can't use it. I am trying to get 2005 installed on it now.
View 5 Replies
View Related
