if i have a size indicated in my text style and i change the size from the style controls, updating the style, should all the instances not change to comply? This is how styles work in other software and how I intuit controlling this parameter.
View 1 Replies
This has been happening intermittently but now seems to be permanent. When I slect the Multiline tool, click to place the text box, then click to place the other corner the box ignores the size I set and snaps to as wide as the screen and one line high. It does this in several different drawings so it is not native to one. If I enter text and deselect I can adjust the handles and alter the text.
I have attached a screen shot to show. It doesn't matter how close or far I am zoomed in on the drawing.
For what it's worth I do not like the way the ribbon panel controls handle text, it usually takes multiple tries to get it to change the text height. I usually resort to using the Properties flyout but that adds mutltple steps to the process.
Civil 3d 2012 - Is there a way to control the size of the text box in by dim style? It is way too close to the text.
View 3 Replies View RelatedI have 2 viewports, one at 1:1000 and the other at 1:250. They show exactly what I want with respect to the area covered and the zoom factor, BUT the text on all of the survey shots is changing size based upon the different viewport scales.
I need the text on the survey points to remain the same size and not adjust based upon the viewport scale. So the text should be a fixed scale and not associative.
I have looked at the labeling style Composer dialogue and can not see a way to specify a fixed height which does not adjust based upon the viewport scale. I can set the point symbols to a specific size so they do not scale - Can I do the same with the text labels (description, elevation, etc.)?
My some autocad files were slowed down. For example i wait about 10 seconds when i edit a text.
Afterwards i see too many text styles in format/text styles command. i want to delete text styles but i can't.
it says "style in use, can't be deleted". I dont know where these text styles come from. Other files when they are infected with the virus, such as. Also have $ signs in text style names.
why my dimstyle appears different when I use different versions of AutoCAD.
In LT it is correct (left hand image), both styles are STANDARD font but in the full version (right hand image) the suffix text style is ROMANS.
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies View RelatedI want to control the Corner Seam in the sheet metal styles but it seems not possible to do that.Now i wondering if this can controled in iLogic.
I want to control the settings which you can make in the Corner Seam.In the attachment are two drawings white different corners, overlap.Those i want to control in different sheet metal styles.Your drawings are only as good as the symbols that complete them...
In Autocad 2011, Mleader, is there a way to set the block size and the text size with the source block (square, cercle etc.. I would like to make it a specific size instead of measuring then scaling.
View 2 Replies View RelatedI used the BEDIT command (editor) on my block to modify the text size then save the block editor changes. Then use ATTSYNC to perform the changes on all existing blocks references to resize the texts, but after i complete the ATTSYNC command, the text in all the blocks disappear.
View 2 Replies View RelatedWhen I xref a drawing created by Practicad into my host drawing, the text size shows up less than half its normal size. This occurs regardless of choosing or not choosing any of the radio button options in the proxy info box that pops up when I open the drawing. It happens on both my desktop and laptop. Practicad (MetaLab Inc.) web-x'd into my computer and confirmed the enabler is installed and the issue has noyhing to do with them. My host drawing scale is set to the same scale as the xref.
View 9 Replies View RelatedReally hoping there's some way to control leading for area type over multiple styles and various font sizes simultaneously.
Know I can change the auto leading percentage, but that's rudimentary.
For example, how can I add leading incrementally to this column without a lot of tedious selecting and style editing?
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies View RelatedThe PaletteSet changed control size and layout. It's different from the status in VS.What's the reason?
View 7 Replies View RelatedInventor 2013 sp1
i want to control the scales of my idw views based on the parts size.
Heres a short intro to what we do, using design assistant we copy an existing project to a new project folder and start designing using the old project as a "template" for the new job.
So, lets say the project i just copied has a part that is 100" "tall", on my drawing sheet the view scale is set to .05 and the view fits nicely on our 8 1/2x11 portrait layout.
Now, the new project's part is only 24" "tall" and using a scale of .05 is no good at all, i need to scale the view up so it will fit nicely in the same layout. This also applies to the associated detail and section views that are on the same sheet.
OK then, Im thinking there should be a way to say if dimx is >=100 then view scale is x and so on if the part is smaller and i would like to do this with the details/sections.
As the pics show, when i change to a smaller size/dia, the views scale needs to be increased. How can this be done... (we do not use vault)
Where is the setting to control the size of dims in the IPT sketch environment. The arrow sizes are OK, but the dims are so small they are unreadable to the point of having to double click on the dim to get the actual value.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
How to set up a dynamic block so I can control the size of an object through parametric dimensions that are linked (somehow) to a lookup table, spreadsheet, list, etc.?
What I'm trying to do (simplified) is place a block of a rectangle, select a size from a dropdown list, and have the block change to be that size - but I don't want to do this through visibility states as there are hundreds of sizes. The whole point is to be able to construct a list, lookup table, excel sheet, etc and link it to parametric dimensions in the block, or at least be able to link a stretch action to parametric dimensions. But the block editor will not allow me to associate a stretch action with a parametric dimension (at least I haven't figured out how to do this.)
is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
I am currently working on a parametric assembly using i Logic to control the size of the components as well as patterns. However, I have hit a road block in trying to figure out how to write a rule for resizing the last roof sheet in this assembly pictured below to be even with the frame. The rule below is what controls the roof sheet pattern based on the frame length. The problem I am continually running into is how do you modify a part which is in an element within the pattern without having it affect the rest of the parts in the pattern since they all refer to part. I can get since it is hard to find information on i Logic.
Roof_Pattern_Spacing = Roof_Sheet_Width
Roof_Pattern_Count=Ceil(Parameter("Length")/Parameter("Sheet Metal Roof Section:1", "Roof_Sheet_Width"))
(Note: The red line symbolizes where I would like to have the roof sheet end.)
Any way to control the visibility of any XRef in a drawing using Excel or Text file. For instance, I have 50 Xref placed in there positions and I want AutoCAD to select what should be visible by reading an external file--Excel or Text file.
View 1 Replies View Relatedwe have a drawing where we were un-able to use snaps (end, per, quad, etc.) on any blocks.
It seems like this particular drawing has issues not seen elsewhere.(besides the fact it was badly drawn) After some time playing with all the settings. We turned on the zero layer and then all the nodes were available as usual.
i've been using AutoCad for 20 years and never seen this. Is this some kind of new feature?Can you control the snaps with a layer? WHY?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
The layer control dropdown in the layer toolbar is just showing the state of the selected object or layer 0 if nothing is selected. Same for the ribbon combo. But it's working in the Quick properties dialog.
View 5 Replies View RelatedWhen I click in my layer control and type in a "letter" to quickly scroll to that part of the alphabet, it changes my current layer to the first laser alphabetically with that certain letter. Is there a way to turn this off? If i am just looking at layers, I don't want autocad to change my current layer.
View 9 Replies View RelatedI just got Autocad at home, and looking to take some work home with me over the weekend.
I've noticed when I open a drawing at my home computer, the font styles, dimention styles, etc are not carried over with the drawing.
best way to transfer a drawing to another machine and keep all the included formats, hatches, and everything else in the drawing?
When you have an annotative object set for a number of different scales, is there a way to turn off the shadow when you mouse over it showing a shadow view of the different scales?
View 3 Replies View Relatedhow to add, in this case the "Dashed2" Linetype, to my drop down selections and have it stay there pernamently? I know how to add it but every time I start a new drawing it is missing again.
View 4 Replies View Related I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
I'm using ACAD 2012. My "Line type Control" toolbar have missing.
View 1 Replies View RelatedThe problem seems very simple. My 'conceptual' or any other visual style viewports plot pixelated, while the legacy wireframe plots perfect. It pixelates everything, linework, edges, fonts. Of course I could just use wireframe, but then what is the point of visual styles I can't use?
In the same drawing with more than one viewport, the viewport with any visual style other than wireframe will mess up while the other one is fine. I have tried every printer, pdf printer, and all the dpi settings I can get ahold of.
Every time I purge my drawing several plot styles show to be deleted. I don't reconize them, one I see offten is called Invisible ink. I started to try to use it to see what its about. I can't seem to find the right track and use this plot style.
View 2 Replies View Related
