AutoCAD 2010 :: Does Zero Layer Control The Drawing
Jul 11, 2012
we have a drawing where we were un-able to use snaps (end, per, quad, etc.) on any blocks.
It seems like this particular drawing has issues not seen elsewhere.(besides the fact it was badly drawn) After some time playing with all the settings. We turned on the zero layer and then all the nodes were available as usual.
i've been using AutoCad for 20 years and never seen this. Is this some kind of new feature?Can you control the snaps with a layer? WHY?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
View 2 Replies
ADVERTISEMENT
Jun 9, 2009
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies
View Related
Sep 30, 2009
The layer control dropdown in the layer toolbar is just showing the state of the selected object or layer 0 if nothing is selected. Same for the ribbon combo. But it's working in the Quick properties dialog.
View 5 Replies
View Related
Mar 8, 2013
When I click in my layer control and type in a "letter" to quickly scroll to that part of the alphabet, it changes my current layer to the first laser alphabetically with that certain letter. Is there a way to turn this off? If i am just looking at layers, I don't want autocad to change my current layer.
View 9 Replies
View Related
Jul 29, 2011
I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
View 8 Replies
View Related
Jan 5, 2011
How do you import layers from one drawing to another? Can that be done?
View 9 Replies
View Related
Sep 21, 2012
I had an issue using 3D 2010. In my drawing I had a layer for my windows. My windows were nicely put together and design on the window layer. Next thing that happens I turn on my drawing today to come and find my windows are now saved on my viewport layer and the viewport layer took the properties of my window layer. Now last night when I plotted out the drawing I made viewports on a layer for viewports and that was the last layer I had used so it was current. What I want to know is why the hell did the layer dominate my window layer with taking the properties of my window layer. I did not merge them!
View 3 Replies
View Related
Sep 1, 2011
The layer merge command is not working in one particular drawing. But fine in others and new files using the acad.dwt file.Is there a setting that effects the command.
View 6 Replies
View Related
Aug 28, 2012
i have gotten a drawing from another user and have managed to purge all of thier layers except for one. I have deleted everything out of the drawing, done "select all" numerous times and deleted, but this layer still won't let itself be deleted. I have made sure it is not the current layer, w blocked the whole drawing etc. There was an ole image in this drawing at some stage, could that have left this horrible layer "25L"???
I hate when i have rogue layers in my files
View 3 Replies
View Related
Nov 12, 2011
when I go to use the Layer Control on the Layer Properties it only lists the layer I'm working on. I then have to use the Layer Manager to change layers. why it would stop listing all the layers?
View 3 Replies
View Related
Sep 6, 2013
I'm working on Civil 3d 2012 and when it's set on Autocrad classic profile I can select my layers right in the drop down list by typing the first letter of the layer and it goes to it. But when my profile is set on Civil 3d, I can do the same in the layer drop down. Is there a way to set it like autocad classic?
View 1 Replies
View Related
Apr 17, 2013
Out of the blue, my Layer Control will not work. When I click on the icon, the top two lines on the screen go gray and the whole thing locks up. The layer palette does not appear. If I try to choose anything on the screen, it beeps. It unlocks if I hit escape. If I type in "layer" at the command line, the same thing happens. At this point, I am unable to change lineweights & colors within my layers settings.
View 2 Replies
View Related
Dec 20, 2012
My layer Control dropdown isn't working. It's showing only the current layer. If I select an object on another layer, it'll display that layer and the current layer only in the dropdown.I've tried using the PICKFIRST setting, but this makes no difference.
View 1 Replies
View Related
Apr 18, 2011
When dragging over a Modelspace View onto a newly created sheet in the SSM, is there a way to automatically designate it to a particular layer of choice, such as the G-Anno-Nplt layer? Just looking for a way to take an extra step out of this process.
View 1 Replies
View Related
Dec 17, 2012
How to control existing layers (Freeze On/Off), in an existing viewports (5 of them in Paperspace) in AutoCad Existing drawing with VB.net? I just want to trigger On or Off, different layers in each different viewports.
View 2 Replies
View Related
Aug 3, 2011
My ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.
View 2 Replies
View Related
Feb 15, 2012
When I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
View 3 Replies
View Related
Mar 7, 2012
If you have more than one PDF overlay, you might put them on separate layers. Generally speaking in this case, the PDF extents overlap so when i plot different sheets, I would want only a single PDF to be visible.
So, my first thought was to freeze the layers of unwanted PDFs in the viewport. Except, once i did that, nothing happened. So, i guess i have to manually freeze the layer when plotting each sheet? I then can't publish the layouts as the appropriate PDF's won't be visible.
View 2 Replies
View Related
Oct 29, 2013
I create all of the shop drawings for our company and I'm trying to find out the best way to track revised drawings. A lot of times I create a drawing and there are several revisions. The shop works off of a high res. pdf I print for them and we also have a signed version from the customer. Once in a while the shop gets their hands on an earlier revision and builds from it. The signed version from the customer is crappy at best and sometimes faxed so working from it is useless.
I have a space where I can manually enter the REVISION # on the drawing but sometimes I forget to update it. If I use an automated timestamp <timestamp> for the drawing with date and time (I've seen this done) or some iLogic code, would this show when the document is printed, opened or saved?
View 4 Replies
View Related
Apr 25, 2012
I would like to make a drawing for the cover of the control box for my new CNC. The cover will be 4”x 16” x 1/8” thick Aluminum and will have holes for 8 switches, with letters for the function of each switch, plus 4 mounting holes 1/8” diameter in the corners.
My problem is how to establish the center lines for the switches and the mounting holes. So I draw a rectangle 4”x 16” and then if I want my switches to be 1” above the bottom edge of the cover how do I establish a center line to have all switches lined up?
The same for the mounting holes in the 4 corners. How do I establish the center lines if I want to have each hole 1/2" away from each corner?
How to write the letters for each switch? I was thinking to draw a rectangle above each switch and center the description inside each rectangle. Is this the best way?
View 1 Replies
View Related
Oct 24, 2012
How I can get my drop-down Layer Control to alphabetize layer names? The listing of layer names is appears random to me:
When I open the Layer Properties dialouge box the layer names are alphabetized by name, so that works, but it doesn't translate over to Layer Control.
C3D 2013
View 3 Replies
View Related
Apr 11, 2012
C3D 2010
I know you can set the view port type in your template for sheet setup controls...
BUT - I have a situation where we have profile xrefs of utilities, in those utility profile drawings we must <DR> in the utilities in plan view. I don't want those utilities to show in my PLAN VIEW view port... So now I simply VP freeze the profile layers in the plan view... simple and easy...
WISH - that I could set my view port types to PLAN and PROFILE, and have only PLAN layers show in PLAN and only PROFILE layers show in PROFILE.... AUTOMATICALLY....
View 2 Replies
View Related
Oct 31, 2013
Is there a way to control what layer a site is created on?
I am surprised I hadn't noticed until now that a site is actually an AECC_PARCEL In 2012 it comes in on the current layer. This causes some undesirable behavior. If your current layer is locked you are unable to create a site. If you later lock the layer the site is on you are prevented from changing site properties. I found it when I could not purge a layer because it contained the site.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 1 Replies
View Related
Mar 21, 2013
I have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Nov 19, 2012
Is there an easy way to switch from a viewport in paperspace to modelspace and have the same layer state show up? I typically run with my paperspace set up with the layers showing how they will print (show lightweights and display plot styles) but I would like to be able to switch to model space and only see the layers that are showing in a particular viewport, to minimize manual layer isolation.
I am using C3D 2011.
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 4 Replies
View Related
Aug 28, 2012
This only happens from time to time. I have a sheet set up with multiple viewports. I double click in one viewport, type LAYER, and the layer dialog appears but my viewport has changed.
View 2 Replies
View Related
May 22, 2012
suddenly I hit something tonight that makes the entire layer control enlarge to the width of the screen everytime I click on the icon.
How do I get it to stay small when I click on Layer Control?
enlarged Layer Control.PDF
View 3 Replies
View Related
Aug 17, 2012
How to control linewieghts on the drawing views that have been created with the VIEWBASE command ?
I would like for example to have my visible lines at 0.4mm thickness, my hidden lines at 0.18 and hatching at 0.25.
This does not appear to be possible at this point in time, one lineweight for everything.
View 7 Replies
View Related
May 20, 2013
Why does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies
View Related
Jul 8, 2013
When I use my layer control and the pop up opens to changes layer or add layer, it will not give me the "x" to close the screen. I am figuring out to close the screen.
View 2 Replies
View Related
Aug 3, 2011
is it possible to extend the dropdown box so i can view whole layer names?
layer toolbar.jpg
View 9 Replies
View Related
