When dragging over a Modelspace View onto a newly created sheet in the SSM, is there a way to automatically designate it to a particular layer of choice, such as the G-Anno-Nplt layer? Just looking for a way to take an extra step out of this process.
View 1 Replies
If you have more than one PDF overlay, you might put them on separate layers. Generally speaking in this case, the PDF extents overlap so when i plot different sheets, I would want only a single PDF to be visible.
So, my first thought was to freeze the layers of unwanted PDFs in the viewport. Except, once i did that, nothing happened. So, i guess i have to manually freeze the layer when plotting each sheet? I then can't publish the layouts as the appropriate PDF's won't be visible.
C3D 2010
I know you can set the view port type in your template for sheet setup controls...
BUT - I have a situation where we have profile xrefs of utilities, in those utility profile drawings we must <DR> in the utilities in plan view. I don't want those utilities to show in my PLAN VIEW view port... So now I simply VP freeze the profile layers in the plan view... simple and easy...
WISH - that I could set my view port types to PLAN and PROFILE, and have only PLAN layers show in PLAN and only PROFILE layers show in PROFILE.... AUTOMATICALLY....
This only happens from time to time. I have a sheet set up with multiple viewports. I double click in one viewport, type LAYER, and the layer dialog appears but my viewport has changed.
View 2 Replies View RelatedUsing ACAD 2010
when i set a view using the view manager , the layer visability state is stored, and wenever i bring back this view, new layers are not visable.
is there a way to control which properties should be included with views and which not?
Any way to transfer a same Lman in a Constructs floor plan dwg to a floor plan view?
My work place produces construction drawing only, no 3D, and we would like to start using constructs, view, sheet system for dwg. orginzing only. We mostly work on big commercial projects.
In Constructs, we have our main plan which includes partition plan, RCP, furniture plan, finishes plan, with annotation, and we manage all this plan through LMAN.
When I create views, I will open my main plan and open lman to set it on partition plan (for example), and save dwg. From here, I create my partition plan view, and a very clean partition plan view created very nice. And I will do the same to create views for RCP, furniture plan , etc.
The one problem is, when will views already created, we sometimes need to go back to the main dwg. and add new layers and informations. LMAN we set up nicely and I work very well on the main plan after we add new layers in certain LMAN control plans but the same LMAN system doesn't transfer to views. I will need to open every plan view and layoff the new layer that just created. I am wondering is the view will updated the same LMAN that we set up for our main plan, so we save time to check our view is showing the right information?
How to control linewieghts on the drawing views that have been created with the VIEWBASE command ?
I would like for example to have my visible lines at 0.4mm thickness, my hidden lines at 0.18 and hatching at 0.25.
This does not appear to be possible at this point in time, one lineweight for everything.
I'm using Civil 3D 2013, and this morning, I have this symbol that appeared under my Viewport Control. What is it and can it be removed?
View 2 Replies View RelatedI have a template for sheet creation with all layers on, thawed, etc.When I insert a view on a sheet, there are VP layers that are frozen.I do not want these settings.
View 6 Replies View RelatedWhen creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
when I go to use the Layer Control on the Layer Properties it only lists the layer I'm working on. I then have to use the Layer Manager to change layers. why it would stop listing all the layers?
View 3 Replies View RelatedMy units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedI'm working on Civil 3d 2012 and when it's set on Autocrad classic profile I can select my layers right in the drop down list by typing the first letter of the layer and it goes to it. But when my profile is set on Civil 3d, I can do the same in the layer drop down. Is there a way to set it like autocad classic?
View 1 Replies View Relatedwe have a drawing where we were un-able to use snaps (end, per, quad, etc.) on any blocks.
It seems like this particular drawing has issues not seen elsewhere.(besides the fact it was badly drawn) After some time playing with all the settings. We turned on the zero layer and then all the nodes were available as usual.
i've been using AutoCad for 20 years and never seen this. Is this some kind of new feature?Can you control the snaps with a layer? WHY?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
The layer control dropdown in the layer toolbar is just showing the state of the selected object or layer 0 if nothing is selected. Same for the ribbon combo. But it's working in the Quick properties dialog.
View 5 Replies View RelatedOut of the blue, my Layer Control will not work. When I click on the icon, the top two lines on the screen go gray and the whole thing locks up. The layer palette does not appear. If I try to choose anything on the screen, it beeps. It unlocks if I hit escape. If I type in "layer" at the command line, the same thing happens. At this point, I am unable to change lineweights & colors within my layers settings.
View 2 Replies View RelatedWhen I click in my layer control and type in a "letter" to quickly scroll to that part of the alphabet, it changes my current layer to the first laser alphabetically with that certain letter. Is there a way to turn this off? If i am just looking at layers, I don't want autocad to change my current layer.
View 9 Replies View RelatedMy layer Control dropdown isn't working. It's showing only the current layer. If I select an object on another layer, it'll display that layer and the current layer only in the dropdown.I've tried using the PICKFIRST setting, but this makes no difference.
View 1 Replies View RelatedHow to control existing layers (Freeze On/Off), in an existing viewports (5 of them in Paperspace) in AutoCad Existing drawing with VB.net? I just want to trigger On or Off, different layers in each different viewports.
View 2 Replies View RelatedMy ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.
View 2 Replies View RelatedWhen I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
View 3 Replies View RelatedHow I can get my drop-down Layer Control to alphabetize layer names? The listing of layer names is appears random to me:
When I open the Layer Properties dialouge box the layer names are alphabetized by name, so that works, but it doesn't translate over to Layer Control.
C3D 2013
Is there a way to control what layer a site is created on?
I am surprised I hadn't noticed until now that a site is actually an AECC_PARCEL In 2012 it comes in on the current layer. This causes some undesirable behavior. If your current layer is locked you are unable to create a site. If you later lock the layer the site is on you are prevented from changing site properties. I found it when I could not purge a layer because it contained the site.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there an easy way to switch from a viewport in paperspace to modelspace and have the same layer state show up? I typically run with my paperspace set up with the layers showing how they will print (show lightweights and display plot styles) but I would like to be able to switch to model space and only see the layers that are showing in a particular viewport, to minimize manual layer isolation.
I am using C3D 2011.
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
suddenly I hit something tonight that makes the entire layer control enlarge to the width of the screen everytime I click on the icon.
How do I get it to stay small when I click on Layer Control?
enlarged Layer Control.PDF
I created sample lines and section views for my road projects. I set all line works to appropriate layers except for "Segment and Points". Cannot change from layer "0".
I right click the existing grade on my section views, click "edit section style", click "display", then change the layer of Segments and points and click "OK", "apply".
Go back to my drawing, verify the layer but still layer "0". I tried so many times, read the manual, call friends but no luck. I am tempted to "explode" my drawing.
Why does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies View RelatedWhen I use my layer control and the pop up opens to changes layer or add layer, it will not give me the "x" to close the screen. I am figuring out to close the screen.
View 2 Replies View Relatedis it possible to extend the dropdown box so i can view whole layer names?
layer toolbar.jpg
Iam just converting back to AutoCAD from microstation.
I am trying to change the colour of a layer in my viewport. Using the layer manager i can do this but i can not get the actual item to change colour. I have checked the vplayermode is 1 and searched around but no luck !!
