This only happens from time to time. I have a sheet set up with multiple viewports. I double click in one viewport, type LAYER, and the layer dialog appears but my viewport has changed.
View 2 RepliesCAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedWhat is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI've managed to open a viewport in paper space of my overall drawing which is great, but I want to zoom in on that viewport to create multiple layouts of the same drawing but as zoomed in sections. When I zoom in the model overlaps over the drawing title block, I expected it to be behind the title block if that makes sense??
View 5 Replies View Relatedhow to hidden viewports in paper space so that if i print the drawing no viewport line be seen in printing
View 4 Replies View RelatedI have got a large drawing with multiple viewports and some layers that are shown in model space won't show when I access model space from paper space (through the viewport). I have had a look at the layer manager through the viewport and everything is switched on, there is no viewport freeze activated but still I can't see the lines in the viewport in paper space (either in model or paperthrough the template).
View 8 Replies View RelatedWhen working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?
View 6 Replies View RelatedI am currently working on a .DWG in Civil3D which has 12 viewports. This particular .DWG causes my computer to lag quite a bit. I was wondering if there was a way of combining viewports in paper space (i.e. taking areas from multiple viewports and displaying them in one viewport), or if I am stuck with the individual viewports? I am just looking to speed up the process, it takes a long time to load the .DWG and work within it, the problem happens to others as well.
.DWG info:
Large area with many smaller sites (retention ponds and such)
All sites must remain in the paper space layout
(I've tried deleting viewports, and that does speed up the process, but again, I need to keep all sites intact).
Computer info:
Windows 7 64-bit
8GB Ram
Intel Core i5-3450 CPU @ 3.10GHz
NVIDIA Quadro FX 1800
I have a site survey that I am having rotation issues with.
In the model space the drawing is rotated so when I draw a vertical line it points up (which is what I am used to). However in the paper space, the drawing is automatically rotated so that north is now pointing up, and if I attempt to draw a normal vertical line as i did in the model space the line now points NE.
How can I rotate the view of the viewport in paper space so that my lines as vertical and horizontal. This would not be such an issue if it was just a plan, but I have drawn sections that just look ridiculous.
Is there no longer a way to edit the shape of a viewport in paper space anymore? I seem to remember being able to make viewports in previous versions and then edit the shape as i needed to.
I am using 2014, and trying to cut a corner off of a rectangular viewport so i can lay another one on my page.
A problem we are having in our office on 1 computer is that this message appears in the command line
'viewport is view locked switching to paper space'
It happens whenever we zoom or pan into one of our locked viewports. We have purposefully locked the viewport so we don't lose the scale when we zoom or pan and want to leave it this way, however, whenever we zoom or pan this message appears and it takes 30 seconds before the screen readjusts to the zoom or pan we require.
I am working on a set of architectural drawings, and so far I got about 12 sheets (each sheet is on a paper space layout) of details. I am using AutoCad 2005LT. The text is in paper space and all the drawings in model space. I have to move some details from one layout to another. When I copy the viewport with text to different layout the items in model space don't show off . Is there a way to copy text in paper space along with detail in model space at the same time to a different layout?
View 6 Replies View RelatedI'm in paper space, in a drawing I didn't create and, when I dbl. click in a viewport to open it and attempt a zoom, the entire paper space environment zooms, as if I was still in paper space, although the task bar tells me I'm in model space. Is this because the viewport is locked? If so, how do I unlock. I see nothing on screen regarding padlocks, except the tool bar/ window positions padlock.
If it makes a difference, I'm in Acad 2006, not 2006 T.
I often have the need to change the orientation of my vieports to better fit my project.
I often, and I mean 9/10 times get one or more fata errors when try to do so.
For clarification I am grabbing the wheel in the top right corner between N and E and rotating the view. When I release the drawing is not in view. Then the program crashes.
It is very frustrating and adding hour on to my day.
CPU: (Brand NEW)
MSI GT70
Intel Core i7-3610QM
NVIDIA Geforce GTX 670M/3G GDDR5
12 (+4) GB of RAM
I know I am not running a quadro but I should still be able to handle this type of task.
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
C3D 2013 ... Windows 7 Enterprise 64
Take a look at this DWG. Elements in The Alignment Style are colour: ACI 1 (red).
The CTB plot style (in the attached zip) returns ACI 1 as black (layout page-setup: display using plot style)
BUT ... The Alignment elements are grey in the paper space viewport !!!
Is there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedWhen dragging over a Modelspace View onto a newly created sheet in the SSM, is there a way to automatically designate it to a particular layer of choice, such as the G-Anno-Nplt layer? Just looking for a way to take an extra step out of this process.
View 1 Replies View RelatedIf you have more than one PDF overlay, you might put them on separate layers. Generally speaking in this case, the PDF extents overlap so when i plot different sheets, I would want only a single PDF to be visible.
So, my first thought was to freeze the layers of unwanted PDFs in the viewport. Except, once i did that, nothing happened. So, i guess i have to manually freeze the layer when plotting each sheet? I then can't publish the layouts as the appropriate PDF's won't be visible.
C3D 2010
I know you can set the view port type in your template for sheet setup controls...
BUT - I have a situation where we have profile xrefs of utilities, in those utility profile drawings we must <DR> in the utilities in plan view. I don't want those utilities to show in my PLAN VIEW view port... So now I simply VP freeze the profile layers in the plan view... simple and easy...
WISH - that I could set my view port types to PLAN and PROFILE, and have only PLAN layers show in PLAN and only PROFILE layers show in PROFILE.... AUTOMATICALLY....
I am using Autocad LT 2012.
Recently I have problem to see my drawing in paper space although I have checked that all layers in paper space are on/thaw.
If there is a way to freeze a layer in one paper space tab and go to the next tab, same drawing, and unfreeze that layer and it not change the previous tab?
View 4 Replies View RelatedHow do you save a layer state on Paper Space???
View 1 Replies View RelatedIs it possible to assign viewports in paper space to a separate layer?
Explanation: I have a paper space with one singular viewport. On the same paper space I added three other viewports that I scaled in but only need for one thing. Can I assign these viewports to a layer and apply them when I need them or do I have to make a seperate paper space for each task.
I want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.